Wenol Metal Polish

1. Identification

Product Identifiers

Product Name

Wenol Metal Polish

Other Names

N/A

Product Number(s)

M021

CAS Number

-

Recommended use of the chemical and restriction on use

Company Details

Emergency Contact Details

2. Hazards Identification

Classification of the substance or mixture

Label Elements

Signal Words

None

Hazard Statement(s)

• Flammable liquid and vapour. Substances and mixtures which, in contact with water, emit flammable gases 1
• In contact with water releases flammable gases, which may ignite spontaneously.
• May cause genetic defects
• Suspected of causing cancer.
• Causes damage to the central nervous system through prolonged or repeated exposure.
• May be fatal if swallowed and enters airways.
• Causes serious eye damage
• Causes severe skin burns and eye damage.

Precautionary Statement(s)

• Obtain special instructions before use.
• Do not handle until all safety precautions have been read and understood.
• Keep away from heat/sparks/open flames/hot surfaces. - No smoking.
• Do not allow contact with water.
• Handle under inert gas. Protect from moisture.
• Keep container tightly closed.
• Ground/bond container and receiving equipment.
• Use explosion-proof electrical/ventilating/lighting/equipment.
• Use only non-sparking tools.
• Take precautionary measures against static discharge.
• Do not breathe dusts or mists.
• Wash thoroughly after handling.
• Do not eat, drink or smoke when using this product.
• Wear protective gloves/protective clothing/eye protection/face protection.
• If swallowed: Immediately call a poison center/doctor.
• Specific treatment (see on this label).
• If swallowed: Rinse mouth. Do NOT induce vomiting.
• If on skin (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower.
• IF INHALED: Remove person to fresh air and keep comfortable for breathing.
• If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do.
• Continue rinsing.
• IF exposed or concerned: Get medical advice/attention.
• Get medical advice/attention if you feel unwell.
• Brush off loose particles from skin. Immerse in cool water/wrap in wet bandages.
• Wash contaminated clothing before reuse.
• In case of fire: Use CO₂, sand, extinguishing powder to extinguish.
• Store in a dry place. Store in a closed container.
• Store in a well-ventilated place. Keep cool.
• Store locked up.
• Dispose of contents/container in accordance with local/regional/national/international regulations

Primary route(s) of entry

Human Health

Inhalation

• Causes damage to the central nervous system through prolonged or repeated exposure.
• May be fatal if swallowed and enters airways

Ingestion

• May cause genetic defects
• Suspected of causing cancer.
• Causes damage to the central nervous system through prolonged or repeated exposure.

Eyes

Causes severe skin burns and eye damage.

Skin

• May cause genetic defects. Suspected of causing cancer.
• Causes severe skin burns and eye damage.

Environment

3. Composition / Information on Ingredients

4. First Aid Measures

Ingestion

Drink copious amounts of water and provide fresh air. Immediately call a doctor.

Inhalation

In case of unconsciousness place patient stably in side position for transportation.

Skin Contact

Immediately wash with water and soap and rinse thoroughly.

Eye Contact

Rinse opened eye for several minutes under running water. Then consult a doctor.

Other Information

• Immediately remove any clothing soiled by the product.
• Symptoms of poisoning may even occur after several hours; therefore medical observation for at least 48 hours after the accident

5. Firefighting Measures

Suitable extinguishing equipment

Fire

CO₂, powder or water spray. Fight larger fires with water spray or alcohol resistant foam.

HAZCHEM

Not available.

Special protective equipment and precautions for fire fighters

6. Accidental Release Measures

Personal precautions, protective equipment and emergency procedures

Wear protective equipment. Keep unprotected persons away.

Environmental precautions

• Use neutralizing agent.
• Ensure adequate ventilation.
• Do not flush with water or aqueous cleansing agents

Methods and materials for containment and clean up

• Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).
• Use neutralizing agent.
• Dispose contaminated material as waste according to item 13.
• Ensure adequate ventilation.
• Do not flush with water or aqueous cleansing agents

7. Handling and Storage

Precautions for safe handling

• Ensure good ventilation/exhaustion at the workplace.
• Open and handle receptacle with care.
• Prevent formation of aerosols
• Keep ignition sources away - Do not smoke.
• Protect from heat.
• Protect against electrostatic charges.
• Keep respiratory protective device available

Conditions for safe storage

• Keep receptacle tightly sealed.
• Store in cool, dry conditions in well sealed receptacles.
• Protect from heat and direct sunlight.

8. Exposure Controls / Personal Protection

Exposure Standards

Engineering controls

• Keep away from foodstuffs, beverages and feed.
• Immediately remove all soiled and contaminated clothing.
• Wash hands before breaks and at the end of work.
• Store protective clothing separately.
• Avoid contact with the eyes.
• Avoid contact with the eyes and skin.

Personal protective equipment

Eye and face protection

• Avoid contact with the eyes and skin.
• Tightly sealed goggles.

Skin protection

• Protective gloves .
• The glove material has to be impermeable and resistant to the product/ the substance/ the preparation.
• Due to missing tests no recommendation to the glove material can be given for the product/ the preparation/ the chemical mixture.
• Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation.
• Material of gloves
• The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance of the glove material can not be calculated in advance and has therefore to be checked prior to the application.
• Penetration time of glove material.
• The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.

Body protection

Immediately remove all soiled and contaminated clothing Wash hands before breaks and at the end of work.

Respiratory protection

In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer exposure use self-contained respiratory protective device.

9. Physical and Chemical Properties

General information

Appearance

Pasty pink

Odour

Ammonia-like

pH

at 20 °C (68 °F): 11.5

Vapour Pressure

at 20 °C (68 °F): 2 hPa (1.5 mm Hg)

Density

at 20 °C (68 °F): 1.15 g/cm³ (9.59675 lbs/gal)

Boiling Point

221 °C (429.8 °F)

Melting Point

Undetermined

Solubility

Fully miscible in water.

Specific Gravity of Density

Not determined.

Flash Point

>50 °C (>122 °F)

Flammable (Explosive) Limits

• Flammable.
• Contact with water liberates extremely flammable gases.

Ignition Temperature

210 °C (410 °F)

Formula

• Solvent content:
• VOC content: 0.00 %
• 0.0 g/l / 0.00 lb/gal
• Solids content: 35.0 %

10. Stability and Reactivity

Reactivity

No further relevant information available.

Chemical stability

No decomposition if used according to specifications.

Possibility of hazardous reactions

Contact with water releases flammable gases.

Conditions to avoid

No further relevant information available.

Incompatible materials

No further relevant information available.

11. Toxicological Information

Acute effects

• The product can cause inheritable damage
• LD/LC50 values relevant for classification:
• 7664-41-7 ammonia, anhydrous.
• Oral LD50 350 mg/kg (rat).
• Inhalative LC50/4 h 2000 mg/l (rat).

Eye contact

• Strong caustic effect.
• Strong irritant with the danger of severe eye injury.

Skin contact

Strong caustic effect on skin and mucous membranes.

Ingestion

• Swallowing will lead to a strong caustic effect on mouth and throat and to the danger of perforation of esophagus and stomach
• Carcinogenic.

Inhalation

No sensitising effects known.

Toxicity and irritation

The product shows the following dangers according to the calculation method of the General EU Classification Guidelines for Preparations as issued in the latest version: Irritant.

12. Ecological Information

Ecotoxicity

No further relevant information available.

Persistence and degradability

No further relevant information available.

Bioaccumulative potential

No further relevant information available.

Other adverse effects

• Water hazard class 2 (Self-assessment): hazardous for water
• Do not allow product to reach ground water, water course or sewage system.
• Must not reach bodies of water or drainage ditch undiluted or unneutralized.
• Danger to drinking water if even small quantities leak into the ground.
• Also poisonous for fish and plankton in water bodies.
• Toxic for aquatic organisms
• Rinse off of bigger amounts into drains or the aquatic environment may lead to increased pH-values. A high pHvalue harms aquatic organisms. In the dilution of the use-level the pH-value is considerably reduced, so that after
• the use of the product the aqueous waste, emptied into drains, is only low water-dangerous.

13. Disposal Considerations

General information

14. Transport Information

ADG label required

HAZCHEM

Not available.

UN Number

None.

Proper shipping name

Not regulated.

Transport hazard class

0

Packing group

None.

Environmental hazard

No information available.

Special precautions for users

Not applicable.

Additional information

No information available.

15. Regulatory Information

Poisons Schedule Number

None of the ingredients is listed.

Other Information

No further relevant information available.

16. Other Information

SDS preparation date

3 February 2025

Comments

This information is based on our present knowledge. However, this shall not constitute a guarantee for any specific product features and shall not establish a legally valid contractual relationship.