Safety Data Sheets / Tissue-Tack Adhesive

Safety Data Sheet

Tissue-Tack Adhesive

Version 1Last reviewed 2 March 2026Catalogue: IM040

1. Identification

Product Identifiers

Product Name: Tissue-Tack Adhesive - DISCONTINUED
Other Names: N/A
Product Number(s): IM040
CAS Number: -

Recommended use of the chemical and restriction on use

Laboratory use.
A mounting medium for immunofluorescent, immunoperoxidase staining.

Company Details

ProSciTech Pty Ltd
11 Carlton Street
KIRWAN QLD 4817
Australia
(07) 4773 9444
pst@proscitech.com
proscitech.com.au

Emergency Contact Details

ProSciTech Pty Ltd
11 Carlton Street
KIRWAN QLD 4817
Australia
(07) 4773 9444
pst@proscitech.com
proscitech.com.au

2. Hazards Identification

Classification of the substance or mixture

GHS05 corrosion
Skin Corr. 1B H314 Causes severe skin burns and eye damage.
Eye Dam. 1 H318 Causes serious eye damage.
GHS07
Acute Tox. 4 H332 Harmful if inhaled.
STOT SE 3 H335 May cause respiratory irritation

Label Elements

Signal Words: None
Hazard Statement(s): Harmful if inhaled.
Causes severe skin burns and eye damage.
May cause respiratory irritation.
Precautionary Statement(s): Wear protective gloves / protective clothing.
Wear eye protection / face protection.
Wash thoroughly after handling.
Use only outdoors or in a well-ventilated area.

Primary route(s) of entry

Not available.

Human Health

Inhalation: Remove person to fresh air and keep comfortable for breathing.
Wash contaminated clothing before reuse.
Ingestion: Rinse mouth. Do NOT induce vomiting.
Eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do.
Continue rinsing.
Immediately call a POISON CENTER/doctor.
Specific treatment (see on this label).
Skin: (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower.

Environment

Dispose of contents/container in accordance with local/regional/national/international regulations.

3. Composition / Information on Ingredients

Name	CAS No.	Content (w/w)	Classification
Ammonia	1336-21-6	2.5-10%	-

4. First Aid Measures

Ingestion: Drink plenty of water and provide fresh air. Call for a doctor immediately.
Inhalation: Supply fresh air. If required, provide artificial respiration. Keep patient warm. Consult doctor if symptoms persist.
In case of unconsciousness place patient stably in side position for transportation.
Skin Contact: Immediately wash with water and soap and rinse thoroughly.
Eye Contact: Rinse opened eye for several minutes under running water. Then consult a doctor.
Other Information: Immediately remove any clothing soiled by the product.
Symptoms of poisoning may even occur after several hours; therefore medical observation for at least 48 hours after the accident.

5. Firefighting Measures

Suitable extinguishing equipment

Fire: CO₂, powder or water spray. Fight larger fires with water spray or alcohol resistant foam.
HAZCHEM: Not available.

Special protective equipment and precautions for fire fighters

Mouth respiratory protective device.

6. Accidental Release Measures

Personal precautions, protective equipment and emergency procedures: Wear protective equipment. Keep unprotected persons away.
Environmental precautions: Dilute with plenty of water.
Methods and materials for containment and clean up: Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust). Use neutralising agent.
Dispose contaminated material as waste according to item 13. Ensure adequate ventilation.

7. Handling and Storage

Precautions for safe handling: Ensure good ventilation/exhaustion at the workplace.
Prevent formation of aerosols.
Conditions for safe storage: Keep container tightly sealed.
Store locked up. Store in a well-ventilated place.

8. Exposure Controls / Personal Protection

Exposure Standards

Engineering controls: Keep cool.

Personal protective equipment

Eye and face protection: Tightly sealed goggles.
Skin protection: Protective gloves
The glove material has to be impermeable and resistant to the product/ the substance/ the preparation.
Due to missing tests no recommendation to the glove material can be given for the product/ the preparation/ the chemical mixture.
Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation.
Material of gloves
The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance of the glove material can not be calculated in advance and has therefore to be checked prior to the application.
Penetration time of glove material
The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.
Body protection: Keep away from foodstuffs, beverages and feed.
Immediately remove all soiled and contaminated clothing.
Wash hands before breaks and at the end of work.
Avoid contact with the eyes.
Avoid contact with the eyes and skin.
Respiratory protection: In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer exposure use self-contained respiratory protective device.

9. Physical and Chemical Properties

General information

Appearance: Opaque liquid
Odour: Ammonia-like
pH: 20 °C: 8
Vapour Pressure: at 20 °C: 23 hPa
Density: 1 g/cm³
Boiling Point: 100 °C
Melting Point: Undetermined.
Solubility: Fully miscible in water.
Specific Gravity of Density: Not determined.
Flash Point: > 93 °C
Flammable (Explosive) Limits: Not determined.
Ignition Temperature: Product is not selfigniting.
Formula: Not available.

10. Stability and Reactivity

Reactivity: No further relevant information available.
Chemical stability: No decomposition if used according to specifications
Possibility of hazardous reactions: No dangerous reactions known.
Conditions to avoid: No further relevant information available.
Incompatible materials: No further relevant information available.

11. Toxicological Information

Acute effects: No further relevant information available.
Eye contact: Strong caustic effect.
Strong irritant with the danger of severe eye injury.
Skin contact: Strong caustic effect on skin and mucous membranes.
Ingestion: Swallowing will lead to a strong caustic effect on mouth and throat and to the danger of perforation of esophagus and stomach.
Inhalation: No sensitising effects known.
Toxicity and irritation: The product shows the following dangers according to the calculation method of the General EU Classification Guidelines for Preparations as issued in the latest version:
Harmful
Corrosive
Irritant

12. Ecological Information

Ecotoxicity: No further relevant information available.
Persistence and degradability: No further relevant information available.
Bioaccumulative potential: No further relevant information available.
Other adverse effects: Generally not hazardous for water Must not reach sewage water or drainage ditch undiluted or unneutralised.

13. Disposal Considerations

General information

Must not be disposed together with household garbage. Do not allow product to reach sewage system. · Uncleaned packaging: ·
Recommendation:Disposal must be made according to official regulations.
Recommended cleansing agents: Water, if necessary together with cleansing agents.

14. Transport Information

ADG label required

HAZCHEM: Not available.
UN Number: None.
Proper shipping name: Not regulated.
Transport hazard class: 0
Packing group: None.
Environmental hazard: No
Special precautions for users: Not applicable.
Additional information: No information available.

15. Regulatory Information

Poisons Schedule Number: Ammonia S5, S6
Other Information: No further relevant information available.

16. Other Information

SDS preparation date: 2 March 2026
Comments: This information is based on our present knowledge. However, this shall not constitute a guarantee for any specific product features and shall not establish a legally valid contractual relationship.