Safety Data Sheets / Technovit 4000 Embedding Medium Kits - Liquid II

Safety Data Sheet

Technovit 4000 Embedding Medium Kits - Liquid II

Version 1Last reviewed 2 March 2026Catalogue: 14656-02 (SII), 14656-03 (SII), EMS104656-02 LIQUID II

1. Identification

Product Identifiers

Product Name: Technovit 4000 Embedding Medium Kits - Liquid II
Other Names: Technovit 4000 - Syrup II
Product Number(s): 14656-02 (SII), 14656-03 (SII), EMS104656-02 LIQUID II
CAS Number: Not available

Recommended use of the chemical and restriction on use

Laboratory chemicals.

Company Details

ProSciTech Pty Ltd
11 Carlton Street
KIRWAN QLD 4817
Australia
(07) 4773 9444
pst@proscitech.com
proscitech.com.au

Emergency Contact Details

ProSciTech Pty Ltd
11 Carlton Street
KIRWAN QLD 4817
Australia
(07) 4773 9444
pst@proscitech.com
proscitech.com.au

2. Hazards Identification

Classification of the substance or mixture

GHS02 Flame
Flam. Liq. 2 H225 Highly flammable liquid and vapour.
GHS08 Health hazard
Carc. 2 H351 Suspected of causing cancer.
Repr. 2 H361 suspected of damaging fertility or the unborn child.
STOT RE 2 H373 May cause damage to the hearing organs through prolonged or repeated exposure.
GHS07
Skin Irrit. 2 H315 Causes skin irritation.
Eye Irritation 2A H319 Causes serious eye irritation.
Skin Sens. 1 H317 May cause an allergic skin reaction.
STOT SE 3 H335 May cause respiratory irritation.

Label Elements

Signal Words: None
Hazard Statement(s): Hazard-determining components of labelling:
Methyl Methacrylate
STYRENE
N,N-dimethyl-p-toluidine
Highly flammable liquid and vapour.
Causes skin irritation.
Causes serious eye irritation.
May cause an allergic skin reaction.
Suspected of causing cancer.
Suspected of damaging fertility or the unborn child.
May cause respiratory irritation.
May cause damage to the hearing organs through prolonged or repeated exposure.
Precautionary Statement(s): Obtain special instructions before use.
Do not handle until all safety precautions have been read and understood.
Keep away from heat/sparks/open flames/hot surfaces. No smoking.
Ground/bond container and receiving equipment.
Use explosion-proof electrical/ventilating/lighting equipment.
Use only non-sparking tools.
Taker precautionary measures against static discharge.
Do not breathe dust/fume/gas/mist/vapours/spray.
Wash thoroughly after handling.
Use only outdoors or in a well-ventilated area.
Contaminated work clothing should not be allowed out of the workplace.
Wear protective gloves/protective clothing/ eye protection/ face protection.

Primary route(s) of entry

Not available.

Human Health

Inhalation: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
Ingestion: Call a POISON CENTER/Doctor if you feel unwell.
Eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If exposed or concerned: Get medical advice/attention. If eye irritation persists: Get medical advice/attention.
Skin: (or hair) Remove/take off immediately all contaminated clothing. Rinse skin with water/shower. Take off contaminated clothing and wash it before reuse. If skin irritation or rash occurs: Get medical advice/attention.

Environment

In case of fire: Use CO₂, powder or water spray for extinction.
Store in a well-ventilated place. Keep container tightly closed.
Store in a well-ventilated place. Keep cool.
Store locked up.
Dispose of contents/container in accordance with local/regional/national/international regulations.

3. Composition / Information on Ingredients

Name	CAS No.	Content (w/w)	Classification
Methyl Methacrylate	80-62-6	>25-≤50%	Not Available
STYRENE	100-42-5	>2.5-≤10%	Not Available
N,N-dimethyl-p-toluidine	99-97-8	≤2.5%	Not Available

4. First Aid Measures

Ingestion: If symptoms persist consult doctor.
Inhalation: Supply fresh air and to be sure call for a doctor.
In case of unconsciousness place patient stably in side position for transportation.
Skin Contact: Immediately wash with water and soap and rinse thoroughly.
Eye Contact: Rinse opened eye for several minutes under running water, if symptoms persist, consult a doctor.
Other Information: Symptoms of poisoning may even occur after several hours; therefore medical observation for at least 48 hours after the accident.

5. Firefighting Measures

Suitable extinguishing equipment

Fire: CO₂, sand, extinguishing powder. Do not use water.
HAZCHEM: For safety reasons unsuitable extinguishing agents: Water with full jet.

Special protective equipment and precautions for fire fighters

Mouth respiratory protective device.

6. Accidental Release Measures

Personal precautions, protective equipment and emergency procedures: Wear protective equipment. Keep unprotected persons away.
Environmental precautions: Do not allow to enter sewers/surface or ground water.
Methods and materials for containment and clean up: Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).
Dispose contaminated material as waste according to item 13.
Ensure adequate ventilation.
Do not flush with water or aqueous cleansing agents.

7. Handling and Storage

Precautions for safe handling: Ensure good ventilation/exhaustion at the workplace.
Prevent formation of aerosols.
Keep ignition sources away - Do not smoke.
Protect from heat.
Protect against electrostatic charges.
Conditions for safe storage: Store in a cool location.
Keep container tightly sealed.
Store in cool, dry conditions in well sealed receptacles.
Protect from heat and direct sunlight.

8. Exposure Controls / Personal Protection

Exposure Standards

Material	TWA ppm	TWA mg/m³	STEL ppm	STEL mg/m³
80-62-6 Methyl Methacrylate	50ppm	208mg/m³	100ppm	416mg/m³
100-42-5 STYRENE	50ppm	213mg/m³	100ppm	426mg/m³

Engineering controls: Keep away from foodstuffs, beverages and feed.
Immediately remove all soiled and contaminated clothing.
Wash hands before breaks and at the end of work.
Avoid contact with the eyes and skin.

Personal protective equipment

Eye and face protection: Tightly sealed goggles.
Skin protection: Protective gloves. The glove material has to be impermeable and resistant to the product/the substance/the preparation. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation. The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.
Body protection: Protective clothing.
Respiratory protection: In case of brief exposure of low pollution use respiratory filter device. In case of intensive or longer exposure use self-contained respiratory protective device.

9. Physical and Chemical Properties

General information

Appearance: Blue fluid
Odour: Characteristic.
pH: Not determined
Vapour Pressure: 47 hPa
Density: 1g/cm³
Boiling Point: 101°C
Melting Point: Undetermined
Solubility: Not miscible or difficult to mix.
Specific Gravity of Density: Not available.
Flash Point: 15°C
Flammable (Explosive) Limits: Lower: 1.2 Vol%
Upper: 12.5 Vol%
Ignition Temperature: 430°C
Formula: Not available.

10. Stability and Reactivity

Reactivity: No further relevant information available.
Chemical stability: No decomposition if used according to specifications.
Possibility of hazardous reactions: No dangerous reactions known.
Conditions to avoid: No further relevant information available.
Incompatible materials: No further relevant information available.

11. Toxicological Information

Acute effects: 80-62-6 Methyl Methacrylate
Oral LD50 7872 mg/kg (rat)
100-42-5 STYRENE
Oral LD50 5000mg/kg (rat)
Inhalative LC50-4 h 24mg/l (rat)
Eye contact: Irritating effect.
Skin contact: Irritant to skin and mucous membranes. Sensitisation possible through skin contact.
Ingestion: No further relevant information available.
Inhalation: No further relevant information available.
Toxicity and irritation: Harmful
Irritant

12. Ecological Information

Ecotoxicity: No further relevant information available.
Persistence and degradability: No further relevant information available.
Bioaccumulative potential: No further relevant information available.
Other adverse effects: Water hazard class 2: hazardous for water.
Do not allow product to reach ground water, water course or sewage system.
Danger to drinking water if even small quantities leak into the ground.

13. Disposal Considerations

General information

Must not be disposed together with household garbage. Do not allow product to reach sewage system.
Disposal must be made according to official regulations.

14. Transport Information

ADG label required

HAZCHEM: For safety reasons unsuitable extinguishing agents: Water with full jet.
UN Number: UN1866
Proper shipping name: 1866 RESIN SOLUTION
Transport hazard class: Class 3 Flammable liquids
Packing group: II
Environmental hazard: Not applicable.
Special precautions for users: Warning: Flammable liquids.
Hazard identification number (Kemler code): 33
EMS Number: F-E,S-E
Stowage Category: B
Additional information: Limited quantities (LQ) 5L
Excepted quantities (EQ) Code: E2
Maximum net quantity per inner packaging: 30mL
Maximum net quantity per outer packaging: 500mL
Transport Category: 2
Tunnel restriction code: D/E

15. Regulatory Information

Poisons Schedule Number: 80-62-6 Methyl Methacrylate S6, S10
100-42-5 STYRENE S5
Other Information: A Chemical Safety Assessment has not been carried out.

16. Other Information

SDS preparation date: 2 March 2026
Comments: This information is based on our present knowledge. However, this shall not constitute a guarantee for any specific product features and shall not establish a legally valid contractual relationship.