Safety Data Sheets / Technovit® 3040 Mounting Medium Kit - Powder
Safety Data Sheet
Technovit® 3040 Mounting Medium Kit - Powder
1. Identification
Product Identifiers
- Product Name
- Technovit 3040 Mounting Medium Kit - Powder
- Other Names
- Not available.
- Product Number(s)
- 14652 (P), EMS14652
- CAS Number
- Not available.
Recommended use of the chemical and restriction on use
Laboratory chemicals. Mounting medium
Company Details
ProSciTech Pty Ltd
11 Carlton Street
KIRWAN QLD 4817
Australia
(07) 4773 9444
pst@proscitech.com
proscitech.com.au
11 Carlton Street
KIRWAN QLD 4817
Australia
(07) 4773 9444
pst@proscitech.com
proscitech.com.au
Emergency Contact Details
ProSciTech Pty Ltd
11 Carlton Street
KIRWAN QLD 4817
Australia
(07) 4773 9444
pst@proscitech.com
proscitech.com.au
11 Carlton Street
KIRWAN QLD 4817
Australia
(07) 4773 9444
pst@proscitech.com
proscitech.com.au
2. Hazards Identification
Classification of the substance or mixture
- GHS08 Health hazard
- Repr. 1B H360 May damage fertility or the unborn child.
- GHS07
- Skin Sens. 1 H317 May cause an allergic skin reaction.
Label Elements


- Signal Words
- None
- Hazard Statement(s)
- Hazard-determining components of labelling:
- dicyclohexyl phthalate
- dibenzoyl peroxide
- May cause an allergic skin reaction.
- May damage fertility or the unborn child
- Precautionary Statement(s)
- Obtain special instructions before use.
- Do not handle until all safety precautions have been read and understood.
- Avoid breathing dust/fume/gas/mist/vapours/spray.
- Contaminated work clothing should not be allowed out of the workplace.
- Wear protective gloves/protective clothing/eye protection/face protection.
Primary route(s) of entry
Not available.
Human Health
- Inhalation
- Not available.
- Ingestion
- Not available.
- Eyes
- Not available.
- Skin
- Wash with plenty of water. If exposed or concerned: Get medical advice/attention. If skin irritation or rash occurs: Get medical advice/attention. Wash contaminated clothing before reuse.
Environment
- Store locked up.
- Dispose of contents/container in accordance with local/regional/national/international regulations.
3. Composition / Information on Ingredients
| Name | CAS No. | Content (w/w) | Classification |
|---|---|---|---|
| dicyclohexyl phthalate | 84-61-7 | >2.5-≤10% | Mixture |
| dibenzoyl peroxide | 94-36-0 | >2.5-≤10% | Mixture |
| Poly(Methyl Methacrylate) | 9011-14-7 | ≤2.5% | Mixture |
4. First Aid Measures
- Ingestion
- If symptoms persist consult doctor.
- Inhalation
- Supply fresh air and to be sure call for a doctor.
- in case of unconsciousness place patient stably in side position for transportation.
- Skin Contact
- Immediately wash with water and soap and rinse thoroughly.
- Eye Contact
- Rinse opened eye for several minutes under running water.
- Other Information
- No further relevant information available.
5. Firefighting Measures
Suitable extinguishing equipment
- Fire
- Use fire extinguishing methods suitable to surrounding conditions.
- HAZCHEM
- No further relevant information available.
Special protective equipment and precautions for fire fighters
No special measures required.
6. Accidental Release Measures
- Personal precautions, protective equipment and emergency procedures
- Not required.
- Environmental precautions
- Do not allow to enter sewers/surface or ground water.
- Methods and materials for containment and clean up
- Dispose contaminated material as waste according to item 13.
7. Handling and Storage
- Precautions for safe handling
- Open and handle receptacle with care. Keep respiratory protective device available.
- Conditions for safe storage
- No special requirements.
8. Exposure Controls / Personal Protection
Exposure Standards
- Engineering controls
- Keep away from foodstuffs, beverages and feed.
- Immediately remove all soiled and contaminated clothing.
- Wash hands before breaks and at the end of work.
- Store protective clothing separately.
Personal protective equipment
- Eye and face protection
- Not required.
- Skin protection
- Wear protective gloves. The glove material has to be impermeable and resistant to the product/the substance/the preparation. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation. The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.
- Body protection
- Not available.
- Respiratory protection
- Not required.
9. Physical and Chemical Properties
General information
- Appearance
- Powder that is coloured different according to colouring.
- Odour
- Odourless
- pH
- Not applicable.
- Vapour Pressure
- Not applicable.
- Density
- 1.20052 g/cm³
- Boiling Point
- Undetermined.
- Melting Point
- Undetermined.
- Solubility
- Insoluble
- Specific Gravity of Density
- Not available.
- Flash Point
- >400°C
- Flammable (Explosive) Limits
- Not determined.
- Ignition Temperature
- Product is not selfigniting
- Formula
- Not available.
10. Stability and Reactivity
- Reactivity
- No further relevant information available.
- Chemical stability
- No decomposition if used according to specifications.
- Possibility of hazardous reactions
- No dangerous reactions known.
- Conditions to avoid
- No further relevant information available.
- Incompatible materials
- No further relevant information.
11. Toxicological Information
- Acute effects
- Not available.
- Eye contact
- No irritating effect.
- Skin contact
- No irritant effect. Sensitisation possible through skin contact.
- Ingestion
- Not available.
- Inhalation
- Not available.
- Toxicity and irritation
- Irritant
12. Ecological Information
- Ecotoxicity
- No further relevant information available.
- Persistence and degradability
- No further relevant information available.
- Bioaccumulative potential
- No further relevant information.
- Other adverse effects
- Water hazard class 1: slightly hazardous for water.
- Do not allow undiluted product or large quantities of it to reach ground water, water course or sewage system.
13. Disposal Considerations
General information
- Must not be disposed together with household garbage. Do not allow product to reach sewage system.
- Disposal must be made according to official regulations.
14. Transport Information
ADG label required


- HAZCHEM
- No further relevant information available.
- UN Number
- UN3077
- Proper shipping name
- 3077 ENVIRONMENTALLY HAZARDOUS SUBSTANCE, SOLID, N.O.S.
- Transport hazard class
- Class 9 Miscellaneous dangerous substances and articles.
- Packing group
- III
- Environmental hazard
- Symbol (fish and tree)
- Special precautions for users
- Warning: Miscellaneous dangerous substances and articles.
- Hazard identification number (Kemler code): 90
- EMS Number: F-A,S-F
- Stowage Category: A
- Stowage Code: SW23 When transported in BK3 bulk container, see 7.6.2.12 and 7.7.3.9
- Additional information
- Limited quantities (LQ): 5kg
- Excepted quantities (EQ): Code: E1
- Maximum net quantity per inner packaging: 30g
- Maximum net quantity per outer packaging: 1000g
15. Regulatory Information
- Poisons Schedule Number
- 94-36-0 dibenzoyl peroxide S2, S4, S5
- Other Information
- A Chemical Safety Assessment has not been carried out.
16. Other Information
- SDS preparation date
- 2 March 2026
- Comments
- This information is based on our present knowledge. However, this shall not constitute a guarantee for any specific product features and shall not establish a legally valid contractual relationship.
