Safety Data Sheets / Technovit® 3040 Mounting Medium Kit - Liquid
Safety Data Sheet
Technovit® 3040 Mounting Medium Kit - Liquid
1. Identification
Product Identifiers
- Product Name
- Technovit 3040 Mounting Medium Kit - Liquid
- Other Names
- Not available.
- Product Number(s)
- 14652(L), EMS14652
- CAS Number
- Not available.
Recommended use of the chemical and restriction on use
Laboratory chemicals. Mounting Medium
Company Details
ProSciTech Pty Ltd
11 Carlton Street
KIRWAN QLD 4817
Australia
(07) 4773 9444
pst@proscitech.com
proscitech.com.au
11 Carlton Street
KIRWAN QLD 4817
Australia
(07) 4773 9444
pst@proscitech.com
proscitech.com.au
Emergency Contact Details
ProSciTech Pty Ltd
11 Carlton Street
KIRWAN QLD 4817
Australia
(07) 4773 9444
pst@proscitech.com
proscitech.com.au
11 Carlton Street
KIRWAN QLD 4817
Australia
(07) 4773 9444
pst@proscitech.com
proscitech.com.au
2. Hazards Identification
Classification of the substance or mixture
- GHS02 Flame
- Flam. Liq. 2 H225 Highly flammable liquid and vapour.
- Water-react 1 H260 In contact with water releases flammable gases which may ignite spontaneously.
- GHS08 Health hazard
- Carc. 2 H351 Suspected of causing cancer.
- STOT RE 2 H373 May cause damage to organs through prolonged or repeated exposure.
- GHS07
- Acute Tox. 4 H302 Harmful if swallowed.
- Skin Irrit. 2 H315 Causes skin irritation.
- Skin Sens. 1 H317 May cause an allergic skin reaction.
- STOT SE 3 H335 May cause respiratory irritation.
Label Elements



- Signal Words
- None
- Hazard Statement(s)
- Hazard-determining components of labelling:
- Methyl Methacrylate
- N,N-dimethyl-p-toluidine
- Highly flammable liquid and vapour.
- In contact with water releases flammable gases which may ignite spontaneously.
- Harmful if swallowed.
- Causes skin irritation.
- May cause an allergic skin reaction.
- Suspected of causing cancer.
- May cause respiratory irritation.
- May cause damage to organs through prolonged or repeated exposure.
- Precautionary Statement(s)
- Obtain special instructions before use.
- Do not handle until all safety precautions have been read and understood.
- Keep away from heat/sparks/open flames/hot surfaces. No smoking.
- Keep away from any possible contact with water, because of violent reaction and possible flash fire.
- Handle and store contents under inert gas. Protect from moisture.
- Ground/bond container and receiving equipment.
- Use explosion-proof electrical/ventilating/lighting equipment.
- Use only non-sparking tools.
- Take precautionary measures against static discharge.
- Do not breathe dust/fume/gas/mist/vapours/spray.
- Wash thoroughly after handling.
- Do not eat, drink or smoke when using this product.
- Use only outdoors or in a well-ventilated area.
- Contaminated work clothing should not be allowed out of the workplace.
- Wear protective gloves/protective clothing/eye protection/face protection.
Primary route(s) of entry
Not available.
Human Health
- Inhalation
- Remove victim to fresh air and keep at rest in a position comfortable for breathing. If exposed or concerned: Get medical advice/attention.
- Ingestion
- Call a POISON CENTER/doctor if you feel unwell. Rinse mouth.
- Eyes
- Not available.
- Skin
- (or hair) remove/take off immediately all contaminated clothing. Rinse skin with water/shower. Take off contaminated clothing and wash it before reuse. If skin irritation or rash occurs: Get medical advice/attention. Brush off loose particles from skin. Immerse in cool water/wrap in bandages.
Environment
- In case of fire: Use CO₂, sand, extinguishing powder for extinction.
- Store in a dry place. Store in a closed container.
- Store in a well-ventilated place. Keep container tightly closed.
- Store in a well-ventilated place. Keep cool.
- Store locked up.
- Dispose of contents/container in accordance with local/regional/national/international regulations.
3. Composition / Information on Ingredients
| Name | CAS No. | Content (w/w) | Classification |
|---|---|---|---|
| Methyl Methacrylate | 80-62-6 | >50-≤100% | Mixture |
| N,N-dimethyl-p-toluidine | 99-97-8 | >2.5-≤10% | Mixture |
4. First Aid Measures
- Ingestion
- Do not induce vomiting; call for medical help immediately.
- Inhalation
- Supply fresh air or oxygen; call for doctor.
- In case of unconsciousness place patient stably in side position for transportation.
- Skin Contact
- Immediately wash with water and soap and rinse thoroughly.
- Eye Contact
- Rinse opened eye for several minutes under running water. Then consult a doctor.
- Other Information
- Immediately remove any clothing soiled by the product.
- Remove breathing equipment only after contaminated clothing have been completely removed.
- In case of irregular breathing or respiratory arrest provide artificial respiration.
5. Firefighting Measures
Suitable extinguishing equipment
- Fire
- CO, sand, extinguishing powder. Do not use water.
- HAZCHEM
- For safety reasons unsuitable extinguishing agents: Water with full jet.
Special protective equipment and precautions for fire fighters
Mouth respiratory protective device.
6. Accidental Release Measures
- Personal precautions, protective equipment and emergency procedures
- Wear protective equipment. Keep unprotected persons away.
- Environmental precautions
- Do not allow to enter sewers/surface or ground water.
- Methods and materials for containment and clean up
- Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).
- Dispose contaminated material as waste according to item 13.
- Ensure adequate ventilation.
- Do not flush with water or aqueous cleansing agents.
7. Handling and Storage
- Precautions for safe handling
- Ensure good ventilation/exhaustion at the workplace.
- Open and handle receptacle with care.
- Prevent formation of aerosols.
- Keep ignition sources away - Do not smoke.
- Protect against electrostatic charges.
- Keep respiratory protective device available.
- Conditions for safe storage
- Store in a cool location.
- Keep container tightly sealed.
- Store in cool, dry conditions in well sealed receptacles.
8. Exposure Controls / Personal Protection
Exposure Standards
| Material | TWA ppm | TWA mg/m³ | STEL ppm | STEL mg/m³ |
|---|---|---|---|---|
| Methyl Methacrylate | 50ppm | 208mg/m³ | 100ppm | 406mg/m³ |
- Engineering controls
- Keep away from foodstuffs, beverages and feed.
- Immediately remove all soiled and contaminated clothing.
- Wash hands before breaks and at the end of work.
- Store protective clothing separately.
- Avoid contact with the eyes and skin.
- Avoid contact with the skin.
Personal protective equipment
- Eye and face protection
- Tightly sealed goggles.
- Skin protection
- Wear protective gloves. The glove material has to be impermeable to the product/the substance/the preparation. Selection of the glove material on consideration of the penetration times. rates of diffusion and the degradation. The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.
- Body protection
- Not available.
- Respiratory protection
- In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer exposure use self-contained respiratory protective device.
9. Physical and Chemical Properties
General information
- Appearance
- Yellowish fluid
- Odour
- Characteristic
- pH
- Not determined
- Vapour Pressure
- 47hPa
- Density
- 0.94482g/cm³
- Boiling Point
- >35°C
- Melting Point
- -48°C
- Solubility
- 1.6g/l
- Specific Gravity of Density
- Not available.
- Flash Point
- 10°C
- Flammable (Explosive) Limits
- Lower: 2.1Vol%
- Upper: 12.5Vol%
- Ignition Temperature
- 430°C
- Formula
- Not available.
10. Stability and Reactivity
- Reactivity
- No further relevant information available.
- Chemical stability
- No decomposition if used according to specifications.
- Possibility of hazardous reactions
- Contact with water releases flammable gases.
- Conditions to avoid
- No further relevant information available.
- Incompatible materials
- No further relevant information available.
11. Toxicological Information
- Acute effects
- 80-62-6 Methyl Methacrylate
- Oral LD50 7872mg/kg (rat)
- Eye contact
- No irritating effect.
- Skin contact
- Irritant to skin and mucous membranes. Sensitisation possible through skin contact.
- Ingestion
- Not available
- Inhalation
- Not available
- Toxicity and irritation
- Toxic
- Irritant
12. Ecological Information
- Ecotoxicity
- No further relevant information available.
- Persistence and degradability
- No further relevant information available.
- Bioaccumulative potential
- No further relevant information available.
- Other adverse effects
- Water hazard class 1: slightly hazardous for water.
- Do not allow undiluted product or large quantities of it to reach ground water, water course or sewage system.
13. Disposal Considerations
General information
- Must not be disposed together with household garbage. Do not allow product to reach sewage system.
- Disposal must be made according to official regulations.
14. Transport Information
ADG label required

- HAZCHEM
- For safety reasons unsuitable extinguishing agents: Water with full jet.
- UN Number
- UN1247
- Proper shipping name
- 1247 METHYL METHACRYLATE MONOMER, STABILIZED
- Transport hazard class
- Class 3 Flammable liquids
- Packing group
- II
- Environmental hazard
- Not applicable.
- Special precautions for users
- Warning: Flammable liquids
- Hazard identification number (Kemler code): 33
- EMS Number: F-E,S-D
- Stowage Category: B
- Stowage code: SW2 Clear of living quarters.
- Additional information
- Limited quantities (LQ): 1L
- Excepted quantities (EQ): Code: E2
- Maximum net quantity per inner packaging: 30mL
- Maximum net quantity per outer packaging: 500mL
- Transport category: 2
- Tunnel restriction code: D/E
15. Regulatory Information
- Poisons Schedule Number
- 80-62-6 Methyl Methacrylate S6, S10
- Other Information
- A Chemical Safety Assessment has not been carried out.
16. Other Information
- SDS preparation date
- 2 March 2026
- Comments
- This information is based on our present knowledge. However, this shall not constitute a guarantee for any specific features and shall not establish a legally valid contractual relationship.
