Safety Data Sheets / Tannic Acid 10% Aqueous Solution
Safety Data Sheet
Tannic Acid 10% Aqueous Solution
1. Identification
Product Identifiers
- Product Name
- Tannic Acid 10% Aqueous Solution
- Other Names
- Tannins
- Product Number(s)
- 21702-10, EMS21702-10
- CAS Number
- EC Number: 215-753-2
Recommended use of the chemical and restriction on use
Laboratory use.
Company Details
ProSciTech Pty Ltd
11 Carlton Street
KIRWAN QLD 4817
Australia
(07) 4773 9444
pst@proscitech.com
proscitech.com.au
11 Carlton Street
KIRWAN QLD 4817
Australia
(07) 4773 9444
pst@proscitech.com
proscitech.com.au
Emergency Contact Details
ProSciTech Pty Ltd
11 Carlton Street
KIRWAN QLD 4817
Australia
(07) 4773 9444
pst@proscitech.com
proscitech.com.au
11 Carlton Street
KIRWAN QLD 4817
Australia
(07) 4773 9444
pst@proscitech.com
proscitech.com.au
2. Hazards Identification
Classification of the substance or mixture
- GHS07
- Skin Irrit. 2 H315 Causes skin irritation.
- Eye Irrit. 2A H319 Causes serious eye irritation.
Label Elements

- Signal Words
- Warning
- Hazard Statement(s)
- Causes skin irritation.
- Causes serious eye irritation.
- Precautionary Statement(s)
- Wear protective gloves / eye protection / face protection.
- Wash thoroughly after handling.
Primary route(s) of entry
Not available.
Human Health
- Inhalation
- Remove person to fresh air and keep comfortable for breathing.
- Ingestion
- Call a POISON CENTER/doctor if you feel unwell.
- Eyes
- Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Specific treatment (see on this label).
- If eye irritation persists: Get medical advice/attention.
- Skin
- Wash with plenty of water.
- Take off contaminated clothing and wash it before reuse.
- If skin irritation occurs: Get medical advice/attention.
Environment
Dispose of contents/container in accordance with local/regional/national/international regulations.
3. Composition / Information on Ingredients
| Name | CAS No. | Content (w/w) | Classification |
|---|---|---|---|
| Tannins | EC number: 215-753-2 | - | - |
4. First Aid Measures
- Ingestion
- Call for a doctor immediately.
- Inhalation
- After inhalation: fresh air.
- Skin Contact
- Immediately wash with water and soap and rinse thoroughly.
- Eye Contact
- Rinse opened eye for several minutes under running water. Remove contact lenses. If symptoms persist, consult a doctor.
- Other Information
- Immediately remove any clothing soiled by the product.
- Symptoms of poisoning may even occur after several hours; therefore medical observation for at least 48 hours after the accident.
5. Firefighting Measures
Suitable extinguishing equipment
- Fire
- CO₂, powder or water spray. Fight larger fires with water spray or alcohol resistant foam.
- HAZCHEM
- Not available.
Special protective equipment and precautions for fire fighters
In the event of fire, wear self-contained breathing apparatus.
6. Accidental Release Measures
- Personal precautions, protective equipment and emergency procedures
- Personal precautions, protective equipment and emergency procedures
- Advice for non-emergency personnel: Avoid inhalation of dusts. Evacuate the danger
- area, observe emergency procedures, consult an expert.
- For personal protection see section 8.
- Environmental precautions
- Tightly closed. Dry.
- Do not allow to enter sewers/surface or ground water.
- Methods and materials for containment and clean up
- No special measures required.
7. Handling and Storage
- Precautions for safe handling
- Ensure good ventilation/exhaustion at the workplace.
- Conditions for safe storage
- Store away from flammable substances.
- Store in a closed container.
8. Exposure Controls / Personal Protection
Exposure Standards
- Engineering controls
- Keep away from foodstuffs, beverages and feed.
- Immediately remove all soiled and contaminated clothing.
- Wash hands before breaks and at the end of work.
- Avoid contact with the eyes and skin.
Personal protective equipment
- Eye and face protection
- Tightly sealed goggles.
- Skin protection
- Protective gloves.
- The glove material has to be impermeable and resistant to the product/ the substance/ the preparation.
- Due to missing tests no recommendation to the glove material can be given for the product/ the preparation/ the chemical mixture.
- Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation.
- Material of gloves.
- The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer.
- Penetration time of glove material.
- The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.
- Body protection
- Protective clothing.
- Respiratory protection
- In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer exposure use self-contained respiratory protective device.
9. Physical and Chemical Properties
General information
- Appearance
- Light brown powder.
- Odour
- Characteristic
- pH
- 3.5 (100 g/l) at 20 °C
- Vapour Pressure
- Not applicable.
- Density
- 0.44 g/cm³
- Boiling Point
- Undetermined.
- Melting Point
- 218 °C
- Solubility
- 250 g/l miscibility with water at 20 °C
- Specific Gravity of Density
- Not determined.
- Flash Point
- 199°C
- Flammable (Explosive) Limits
- Product is not flammable.
- Ignition Temperature
- Not determined
- Formula
- C76H52O46
10. Stability and Reactivity
- Reactivity
- No further relevant information available.
- Chemical stability
- No decomposition if used according to specifications.
- Possibility of hazardous reactions
- No dangerous decomposition products known.
- Conditions to avoid
- No further relevant information available.
- Incompatible materials
- No further relevant information available.
11. Toxicological Information
- Acute effects
- No further relevant information available.
- Eye contact
- Irritating effect.
- Skin contact
- Irritant to skin and mucous membranes.
- Ingestion
- LD/LC50 values relevant for classification:
- Oral LD50 2260 mg/kg (rat).
- Inhalation
- No sensitising effects known.
- Toxicity and irritation
- LD/LC50 values relevant for classification:
- Oral LD50 2260 mg/kg (rat)
12. Ecological Information
- Ecotoxicity
- Not known to be hazardous to water.
- Persistence and degradability
- No further relevant information available.
- Bioaccumulative potential
- No further relevant information available.
- Other adverse effects
- Water hazard class 2: hazardous for water.
- Do not allow product to reach ground water, water course or sewage system.
- Danger to drinking water if even small quantities leak into the ground.
13. Disposal Considerations
General information
- Waste material must be disposed of in accordance with the national and local regulations.
- Leave chemicals in original containers. No mixing with other waste. Handle uncleaned containers like the product itself.
14. Transport Information
ADG label required
- HAZCHEM
- Not available.
- UN Number
- None
- Proper shipping name
- Not regulated.
- Transport hazard class
- 0
- Packing group
- None.
- Environmental hazard
- No
- Special precautions for users
- Not applicable.
- Additional information
- No information available.
15. Regulatory Information
- Poisons Schedule Number
- Section 355 (extremely hazardous substances):
- None of the ingredients is listed.
- Section 313 (Specific toxic chemical listings):
- None of the ingredients is listed.
- TSCA (Toxic Substances Control Act):
- All components have the value ACTIVE.
- Hazardous Air Pollutants
- None of the ingredients is listed.
- Proposition 65
- Chemicals known to cause cancer:
- None of the ingredients is listed.
- Chemicals known to cause reproductive toxicity for females:
- None of the ingredients is listed.
- Chemicals known to cause reproductive toxicity for males:
- None of the ingredients is listed.
- Chemicals known to cause developmental toxicity:
- None of the ingredients is listed.
- Carcinogenic categories
- EPA (Environmental Protection Agency)
- None of the ingredients is listed.
- TLV (Threshold Limit Value)
- None of the ingredients is listed.
- NIOSH-Ca (National Institute for Occupational Safety and Health)
- None of the ingredients is listed
- Other Information
- A Chemical Safety Assessment has not been carried out.
16. Other Information
- SDS preparation date
- 2 March 2026
- Comments
- Abbreviations and acronyms:
- ADR: Accord relatif au transport international des marchandises dangereuses par route (European Agreement Concerning the International
- Carriage of Dangerous Goods by Road)
- IMDG: International Maritime Code for Dangerous Goods
- DOT: US Department of Transportation
- IATA: International Air Transport Association
- EINECS: European Inventory of Existing Commercial Chemical Substances
- ELINCS: European List of Notified Chemical Substances
- CAS: Chemical Abstracts Service (division of the American Chemical Society)
- NFPA: National Fire Protection Association (USA)
- HMIS: Hazardous Materials Identification System (USA)
- VOC: Volatile Organic Compounds (USA, EU)
- PBT: Persistent, Bioaccumulative and Toxic
- vPvB: very Persistent and very Bioaccumulative
- NIOSH: National Institute for Occupational Safety
- OSHA: Occupational Safety Health
- TLV: Threshold Limit Value
- PEL: Permissible Exposure Limit
- REL: Recommended Exposure Limit
- Skin irritation 2: Skin corrosion/irritation - Category 2
- Eye irritation 2A: Serious eye damage/eye irritation - Category 2A
- References
- EMS SDS Tannic Acid, 10% Aqueous Solution. 11/04/2022 https://www.emsdiasum.com/docs/technical/msds/21702-10.pdf
- Sigma-Aldrich SDS Tannic acid 08/02/2025 https://www.sigmaaldrich.com/AU/en/sds/sial/403040-userType=undefined.
