Synthetic Diamond Powder

1. Identification

Product Identifiers

Product Name

Synthetic Diamond Powder

Other Names

SYNGRIT, WHEELGRIT, PremaDia, PDA, Micron±

Product Number(s)

M24-025, M24-05, M24-1, M24-3, M24-6, M24-9

CAS Number

7782-40-3

Recommended use of the chemical and restriction on use

Company Details

Emergency Contact Details

2. Hazards Identification

Classification of the substance or mixture

Label Elements

Signal Words

Danger

Hazard Statement(s)

This substance is not dangerous according to Directive 67/548/EEC.

Precautionary Statement(s)

There is no obligation to label this product according to Regulation (EC) 1272/2008.

Primary route(s) of entry

Human Health

Inhalation

Not available.

Ingestion

Not available.

Eyes

Not available.

Skin

Not available.

Environment

3. Composition / Information on Ingredients

4. First Aid Measures

Ingestion

Rinse out mouth and drink plenty of water.

Inhalation

Move subject to fresh air.

Skin Contact

Wash skin thoroughly with soap and water.

Eye Contact

Keeping the eyelids apart, flush thoroughly with water.

Other Information

As a general rule, in case of doubt or if symptoms persist, always consult a doctor or seek medical attention.

5. Firefighting Measures

Suitable extinguishing equipment

Fire

Suitable Extinguishing Media: Water, foam, sand, powder, carbon dioxide (CO₂).

HAZCHEM

Not available.

Special protective equipment and precautions for fire fighters

6. Accidental Release Measures

Personal precautions, protective equipment and emergency procedures

Avoid dust formation. Ventilate area leak or spill. Wear appropriate personal protective equipment. Isolate hazard area. Keep unnecessary and unprotected personnel from entering area of leak or spill.

Environmental precautions

Avoid product from entering into drains, surface water or groundwater.

Methods and materials for containment and clean up

Avoid dust formation. Ventilate area of leak or spill. Wear appropriate personal protective equipment. Isolate hazard area. Keep unnecessary and unprotected personnel from entering. Vacuum or carefully scoop up material spillages and place in appropriate containers for disposal.

7. Handling and Storage

Precautions for safe handling

• Measures to Prevent Fire: Keep away from sources of ignition.
• Measures to Prevent Aerosol and Dust Generation: Not possible to create aerosol under normal working conditions. Do not permit dust to collect on walls, floors, machinery or equipment. Ensure the area is well ventilated.
• Measures to Protect the Environment: Keep container tightly closed. Clean-up all spillages.
• Advice on General Occupational Hygiene:
• Wear personal protection equipment. Avoid generation and inhalation of dusts. Avoid contact with skin, eyes and clothes. Wash hands and face after handling. Do not eat, drink or smoke in the workplace. Wash contaminated clothes prior to reuse.

Conditions for safe storage

• Technical Measures and Storage Conditions: Store in a cool, dry, well ventilated area. Keep containers sealed when not in use.
• Packaging Materials: Keep/store in original packaging.
• Storage Class: 13 (Non combustible solid materials)

8. Exposure Controls / Personal Protection

Exposure Standards

Engineering controls

• Product Related Measures to Prevent Exposure: Avoid contact with skin, eyes and clothing. Do not eat, drink or smoke in the workplace. Wear personal protection equipment. Wash hands and face before breaks and at the end of work.
• Structural Measures to Prevent exposure: Provide adequate ventilation in the workplace. Use appropriate engineering controls such as process enclosures, local exhaust ventilation or other engineering controls too control airborne levels below recommended exposure limits as indicated.

Personal protective equipment

Eye and face protection

Wear safety glasses, goggles or face shield. PPE specification is process dependent.

Skin protection

• Hand Protection: Wear appropriate chemical resistant gloves. PPE specification is process dependent.
• Other Protection: Wear other appropriate protection as detailed in risk assessment and depending on process being undertaken.

Body protection

• Wear body protection. PPE specification is process dependent.
• In situations where thermal hazards exist, wear appropriate protection such as thermal gloves and aprons. PPE specification is process dependent.

Respiratory protection

Use respiratory protection in situations where adequate ventilation is not supplied. PPE specification is process dependent.

9. Physical and Chemical Properties

General information

Appearance

Yellowish, crystalline, solid, powder

Odour

Odourless

pH

Not applicable.

Vapour Pressure

Not applicable.

Density

Not applicable.

Boiling Point

Not applicable.

Melting Point

3,800 °C at 130 kbar

Solubility

Insoluble

Specific Gravity of Density

Not applicable.

Flash Point

Not available.

Flammable (Explosive) Limits

Not flammable.Explosive Properties: Lower Explosive Limit 250 g/m³ for dust.

Ignition Temperature

> 410°C for dust.

Formula

Not available.

10. Stability and Reactivity

Reactivity

Under standard conditions, no ignition, explosion, self-heating or visible decomposition.

Chemical stability

Inorganic solid with a high chemical inertness. It is stable under normal temperatures and pressures. Does not react with oxygen below 600°C and is completely inert against all known acids.

Possibility of hazardous reactions

Explosive dust-air mixtures may occur.

Conditions to avoid

Avoid ignition sources.

Incompatible materials

Inert against all known acids. Insoluble in water and organic solvents.

11. Toxicological Information

Acute effects

• Diamond is not Acute Toxic.
• Acute Oral/Dermal Toxicity LD50 rat: >2000 mg/kg.
• Acute Inhalation Toxicity LC50 rat: > 5.2 mg/m³ air.

Eye contact

Dusts may cause irritation to eyes.

Skin contact

Dusts may cause skin irritation. Not a skin sensitiser.

Ingestion

No further relevant information available.

Inhalation

Dusts may irritate the respiratory tract.

Toxicity and irritation

No further relevant information available.

12. Ecological Information

Ecotoxicity

• Acute toxicity, fish (oncorhynchus mykiss): LC50(96h) >100 mg/L.
• Acute toxicity, daphnia (daphnia magna): EC50(48h) >100 mg/L.

Persistence and degradability

Diamond is not degradable or biodegradable in water.

Bioaccumulative potential

No Bioaccumulative potential.

Other adverse effects

No further relevant information available.

13. Disposal Considerations

General information

14. Transport Information

ADG label required

HAZCHEM

Not available.

UN Number

None.

Proper shipping name

Not regulated.

Transport hazard class

0

Packing group

None.

Environmental hazard

No information available.

Special precautions for users

No information available.

Additional information

No information available.

15. Regulatory Information

Poisons Schedule Number

No information available.

Other Information

No further relevant information available.

16. Other Information

SDS preparation date

2 March 2026

Comments

This information is based on our present knowledge. However, this shall not constitute a guarantee for any specific product features and shall not establish a legally valid contractual relationship.