Safety Data Sheets / Sodium Thiosulphate Aqueous Solutions - 2%
Safety Data Sheet
Sodium Thiosulphate Aqueous Solutions - 2%
1. Identification
Product Identifiers
- Product Name
- Sodium Thiosulphate Aqueous Solutions - 2%
- Other Names
- Synonyms
- Product Number(s)
- 21360-2, EMS21360-2
- CAS Number
- 7732-18-5
Recommended use of the chemical and restriction on use
Laboratory use.
Company Details
ProSciTech Pty Ltd
11 Carlton Street
KIRWAN QLD 4817
Australia
(07) 4773 9444
pst@proscitech.com
proscitech.com.au
11 Carlton Street
KIRWAN QLD 4817
Australia
(07) 4773 9444
pst@proscitech.com
proscitech.com.au
Emergency Contact Details
ProSciTech Pty Ltd
11 Carlton Street
KIRWAN QLD 4817
Australia
(07) 4773 9444
pst@proscitech.com
proscitech.com.au
11 Carlton Street
KIRWAN QLD 4817
Australia
(07) 4773 9444
pst@proscitech.com
proscitech.com.au
2. Hazards Identification
Classification of the substance or mixture
- GHS07
- Acute toxicity - oral 4 H302 Harmful if swallowed.
- Acute toxicity - dermal 4 H312 Harmful in contact with skin.
- Acute toxicity - inhalation 4 H332 Harmful if inhaled.
- Skin irritation 2 H315 Causes skin irritation.
- Eye irritation 2B H320 Causes eye irritation
Label Elements

- Signal Words
- Warning
- Hazard Statement(s)
- GHS07
- Acute toxicity - oral 4 H302 Harmful if swallowed.
- Acute toxicity - dermal 4 H312 Harmful in contact with skin.
- Acute toxicity - inhalation 4 H332 Harmful if inhaled.
- Skin irritation 2 H315 Causes skin irritation.
- Eye irritation 2B H320 Causes eye irritation.
- Harmful if swallowed, in contact with skin or if inhaled.
- Causes skin and eye irritation.
- Precautionary Statement(s)
- Avoid breathing dust/fume/gas/mist/vapours/spray
- Wash thoroughly after handling.
- Do not eat, drink or smoke when using this product.
Primary route(s) of entry
Not Available
Human Health
- Inhalation
- Remove person to fresh air and keep comfortable for breathing.
- Ingestion
- Call a poison center/doctor if you feel unwell.
- Rinse mouth.
- Eyes
- Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
- If eye irritation persists: Get medical advice/attention
- Skin
- Use only outdoors or in a well-ventilated area.
- Wear protective gloves / protective clothing.
- Wash with plenty of water.
- If skin irritation occurs: Get medical advice/attention.
- Take off contaminated clothing and wash it before reuse.
Environment
- Store in a well-ventilated place. Keep container tightly closed.
- Dispose of contents/container in accordance with local/regional/national/international regulations.
3. Composition / Information on Ingredients
| Name | CAS No. | Content (w/w) | Classification |
|---|---|---|---|
| Sodium Thiosulphate Pentahydrate | 10102-17-7 | 1-5% | Not Available |
4. First Aid Measures
- Ingestion
- Immediately call a doctor
- Inhalation
- Supply fresh air. If required, provide artificial respiration. Keep patient warm. Consult doctor if symptoms persist.
- In case of unconsciousness place patient stably in side position for transportation.
- Skin Contact
- Immediately wash with water and soap and rinse thoroughly.
- Eye Contact
- Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor.
- Other Information
- General information:
- Symptoms of poisoning may even occur after several hours; therefore medical observation for at least 48 hours
- after the accident.
5. Firefighting Measures
Suitable extinguishing equipment
- Fire
- Use fire fighting measures that suit the environment.
- HAZCHEM
- No further relevant information available.
Special protective equipment and precautions for fire fighters
Mouth respiratory protective device.
6. Accidental Release Measures
- Personal precautions, protective equipment and emergency procedures
- Not required.
- Environmental precautions
- Dilute with plenty of water
- Methods and materials for containment and clean up
- Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).
- Dispose contaminated material as waste according to section 13.
- Ensure adequate ventilation.
7. Handling and Storage
- Precautions for safe handling
- Ensure good ventilation/exhaustion at the workplace.
- Prevent formation of aerosols.
- information about protection against explosions and fires: No special measures required.
- Conditions for safe storage
- Requirements to be met by storerooms and receptacles: No special requirements.
- Information about storage in one common storage facility: Not required.
- Further information about storage conditions: Keep receptacle tightly sealed.
- Specific end use(s): No further relevant information available.
8. Exposure Controls / Personal Protection
Exposure Standards
- Engineering controls
- No further data; see section 7.
Personal protective equipment
- Eye and face protection
- Tightly sealed goggles.
- Skin protection
- Protective gloves
- The glove material has to be impermeable and resistant to the product/ the substance/ the preparation.
- Due to missing tests no recommendation to the glove material can be given for the product/ the preparation/ the
- chemical mixture.
- Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation
- Material of gloves
- The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and
- varies from manufacturer to manufacturer.
- Penetration time of glove material
- The exact break through time has to be found out by the manufacturer of the protective gloves and has to be
- observed.
- Body protection
- Keep away from foodstuffs, beverages and feed.
- Immediately remove all soiled and contaminated clothing.
- Wash hands before breaks and at the end of work.
- Avoid contact with the eyes and skin.
- Respiratory protection
- In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer exposure use respiratory protective device that is independent of circulating air.
9. Physical and Chemical Properties
General information
- Appearance
- Clear Liquid
- Odour
- Characteristic
- pH
- Mixture is non-polar/aprotic
- Vapour Pressure
- at 20 °C (68 °F): 23 hPa (17.3 mm Hg)
- Density
- at 20 °C (68 °F): 1 g/cm³ (8.345 lbs/gal)
- Boiling Point
- 100 °C (212 °F)
- Melting Point
- 0 °C (32 °F)
- Solubility
- Fully miscible with water
- Specific Gravity of Density
- Not determined
- Flash Point
- Not determined
- Flammable (Explosive) Limits
- Product does not present an explosion hazard.
- Ignition Temperature
- Not determined.
- Formula
- Na₂S₂O?
10. Stability and Reactivity
- Reactivity
- No further relevant information available.
- Chemical stability
- Thermal decomposition / conditions to be avoided: No decomposition if used according to specifications.
- Possibility of hazardous reactions
- No dangerous reactions known.
- Conditions to avoid
- No further relevant information available.
- Incompatible materials
- No further relevant information available.
11. Toxicological Information
- Acute effects
- Not Applicable
- Eye contact
- Irritating effect
- Skin contact
- Irritant to skin and mucous membranes.
- Ingestion
- No sensitizing effects known
- Inhalation
- No sensitizing effects known
- Toxicity and irritation
- No interactive effects between components are known.
12. Ecological Information
- Ecotoxicity
- Not hazardous for water
- Persistence and degradability
- No further relevant information available
- Bioaccumulative potential
- No further relevant information available
- Other adverse effects
- No further relevant information available.
13. Disposal Considerations
General information
- Must not be disposed of together with household garbage. Do not allow product to reach sewage system
- Uncleaned packagings:
- Recommendation: Disposal must be made according to official regulations.
- Recommended cleansing agent: Water, if necessary with cleansing agents.
14. Transport Information
ADG label required
- HAZCHEM
- No further relevant information available.
- UN Number
- Void
- Proper shipping name
- Void
- Transport hazard class
- Void
- Packing group
- Void
- Environmental hazard
- Not applicable.
- Special precautions for users
- Not applicable.
- Additional information
- Not applicable.
15. Regulatory Information
- Poisons Schedule Number
- Section 355 (extremely hazardous substances): None of the ingredients is listed.
- Section 313 (Specific toxic chemical listings): None of the ingredients is listed.
- Other Information
- Hazard statements
- Harmful if swallowed, in contact with skin or if inhaled.
- Causes skin and eye irritation.
- Precautionary statements
- Avoid breathing dust/fume/gas/mist/vapours/spray
- Wash thoroughly after handling.
- Do not eat, drink or smoke when using this product.
- Use only outdoors or in a well-ventilated area.
- Wear protective gloves / protective clothing.
- If swallowed: Call a poison center/doctor if you feel unwell.
- Rinse mouth.
- If on skin: Wash with plenty of water.
- Specific treatment (see on this label).
- If inhaled: Remove person to fresh air and keep comfortable for breathing.
- If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do.
- Continue rinsing.
- If skin irritation occurs: Get medical advice/attention.
- Take off contaminated clothing and wash it before reuse.
- If eye irritation persists: Get medical advice/attention.
- Store in a well-ventilated place. Keep container tightly closed.
- Dispose of contents/container in accordance with local/regional/national/international regulations.
- Chemical safety assessment: A Chemical Safety Assessment has not been carried out.
16. Other Information
- SDS preparation date
- 2 March 2026
- Comments
- Abbreviations and acronyms:
- ADR: Accord relatif au transport international des marchandises dangereuses par route (European Agreement Concerning the International
- Carriage of Dangerous Goods by Road)
- IMDG: International Maritime Code for Dangerous Goods
- DOT: US Department of Transportation
- IATA: International Air Transport Association
- EINECS: European Inventory of Existing Commercial Chemical Substances
- ELINCS: European List of Notified Chemical Substances
- CAS: Chemical Abstracts Service (division of the American Chemical Society)
- NFPA: National Fire Protection Association (USA)
- HMIS: Hazardous Materials Identification System (USA)
- VOC: Volatile Organic Compounds (USA, EU)
- PBT: Persistent, Bioaccumulative and Toxic
- vPvB: very Persistent and very Bioaccumulative
- References
- EMS Sodium Thiosulphate, 2% Aqueous https://www.emsdiasum.com/docs/technical/msds/21360-2.pdf 28/12/2021
