Safety Data Sheets / Safranin 1% Aqueous Solution
Safety Data Sheet
Safranin 1% Aqueous Solution
1. Identification
Product Identifiers
- Product Name
- Safranin 1% Aqueous Solution
- Other Names
- Safranin O stain strong solution
- Product Number(s)
- ASF1-500
- CAS Number
- -
Recommended use of the chemical and restriction on use
Laboratory use. Laboratory reagent. Microbiology stain.
Company Details
ProSciTech Pty Ltd
11 Carlton Street
KIRWAN QLD 4817
Australia
(07) 4773 9444
pst@proscitech.com
proscitech.com.au
11 Carlton Street
KIRWAN QLD 4817
Australia
(07) 4773 9444
pst@proscitech.com
proscitech.com.au
Emergency Contact Details
ProSciTech Pty Ltd
11 Carlton Street
KIRWAN QLD 4817
Australia
(07) 4773 9444
pst@proscitech.com
proscitech.com.au
11 Carlton Street
KIRWAN QLD 4817
Australia
(07) 4773 9444
pst@proscitech.com
proscitech.com.au
2. Hazards Identification
Classification of the substance or mixture
Not available.
Label Elements
- Signal Words
- Warning
- Hazard Statement(s)
- Not classified as Hazardous according to the Globally Harmonised System of Classification and Labelling of Chemicals (GHS) and Safe Work Australia criteria. Not classified as Dangerous Goods according to the Australian Code for the Transport of Dangerous Goods by Road and Rail. (7th edition) The product is not classified according to the Globally Harmonised System (GHS).
- Precautionary Statement(s)
- Not available.
Primary route(s) of entry
Not available.
Human Health
- Inhalation
- May cause respiratory irritation, coughing, discomfort and difficulty breathing.
- Ingestion
- May cause irritation of mouth, throat and stomach, nausea, vomiting and diarrhoea.
- Eyes
- Eye Irrit. 2A, H319:
- May cause eye irritation, stinging, tearing and blurred vision.
- Skin
- May cause skin irritation, itchiness and redness.
Environment
No further relevant information available.
3. Composition / Information on Ingredients
| Name | CAS No. | Content (w/w) | Classification |
|---|---|---|---|
| 3,7-diamino-2,8-dimethyl-5-phenylphenaziniumchloride | 477-73-6- | 0.1- 1% | - |
4. First Aid Measures
- Ingestion
- If swallowed, do not induce vomiting. Immediately rinse mouth with water. Give a glass of water. Never give anything by mouth to an unconscious person. Seek medical attention if symptoms persist.
- Inhalation
- If inhaled, remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Seek medical attention if breathing problems develop.
- Skin Contact
- In case of skin contact, immediately remove contaminated clothing and wash affected areas with water and soap. Seek medical attention if symptoms persist.
- Eye Contact
- In case of eye contact, hold eyelids open and rinse with water for at least 15 minutes. Seek medical attention if symptoms persist.
- Other Information
- No further relevant information available.
5. Firefighting Measures
Suitable extinguishing equipment
- Fire
- Use fire extinguishing methods suitable to surrounding conditions.
- HAZCHEM
- Not available.
Special protective equipment and precautions for fire fighters
Hazardous combustion products include oxides of carbon. Product is not flammable or combustible. Containers close to fire should be removed if safe to do so. When fighting a major fire wear self-contained breathing apparatus and protective equipment.
6. Accidental Release Measures
- Personal precautions, protective equipment and emergency procedures
- Wear appropriate respiratory protection and protective clothing. Evacuate all non-essential personnel from affected area. Do not breathe vapours. Ensure adequate ventilation.
- Environmental precautions
- In the event of a major spill, prevent spillage from entering drains or water courses.
- Methods and materials for containment and clean up
- Stop leak if safe to do so and absorb spill with sand, earth, vermiculite or some other absorbent material. Collect the spilled material and place into a suitable container for disposal. Material may be slippery when spilt.
7. Handling and Storage
- Precautions for safe handling
- Use of safe work practices are recommended to avoid eye or skin contact and inhalation of vapours. Use only outdoors or in a well-ventilated area. Food, beverages and tobacco products should not be stored or consumed where this material is in use. Always wash hands before smoking, eating, drinking or using the toilet. Wash contaminated clothing and other protective equipment before storage or re-use. Provide eyewash fountains and safety showers in close proximity to points of potential exposure.
- Conditions for safe storage
- Store in a cool, dry and well ventilated area out of direct sunlight. Keep in original container tightly closed when not in use. Protect from heat, sparks, open flames and other sources of ignition. Keep away from strong alkalies, acids and oxidising agents.
8. Exposure Controls / Personal Protection
Exposure Standards
- Engineering controls
- Ensure adequate ventilation of the working area.
Personal protective equipment
- Eye and face protection
- Eye and face protectors for protection against splashing materials or liquids. See Australian/New Zealand Standard AS/NZS 1337 for more information.
- Skin protection
- PVC or rubber gloves. See Australian/New Zealand Standard AS/NZS 2161 for more information. When selecting gloves for use against certain chemicals, the degradation resistance, permeation rate and permeation breakthrough time should be considered.
- Body protection
- Occupational protective clothing (depending on conditions in which it has to be used, in particular as regards the period for which it is worn, which shall be determined on the basis of the seriousness of the risk, the frequency of exposure to the risk, the characteristics of the workstation of each worker and the performance of the protective clothing). See Australian/New Zealand Standard AS/NZS 4501 for more information.
- Respiratory protection
- The use of a dustmask or half-face respirator with a P1 filter is recommended. Filter capacity and respirator type depends on exposure levels. If entering spaces where the airborne concentration of a contaminant is unknown then the use of a selfcontained breathing apparatus (SCBA) with positive pressure air supply is recommended. See Australian Standards AS/NZS 1715 and 1716 for more information.
9. Physical and Chemical Properties
General information
- Appearance
- Dark red liquid
- Odour
- Mild alcohol odour or thymol.
- pH
- Not available.
- Vapour Pressure
- Not available.
- Density
- 1 g/cm³
- Boiling Point
- 100 °C
- Melting Point
- 0 °C
- Solubility
- Soluble in water.
- Specific Gravity of Density
- Not available.
- Flash Point
- Not applicable.
- Flammable (Explosive) Limits
- Not applicable.
- Ignition Temperature
- Not applicable.
- Formula
- Not available.
10. Stability and Reactivity
- Reactivity
- No further relevant information available.
- Chemical stability
- Stable at ambient temperature and under normal conditions of use.
- Possibility of hazardous reactions
- Hazardous polymerisation will not occur.
- Conditions to avoid
- Heat, sparks, open flames and other sources of ignition.
- Incompatible materials
- Strong alkalies, acids and oxidising agents.
11. Toxicological Information
- Acute effects
- No further relevant information available.
- Eye contact
- May cause eye irritation, stinging, tearing and blurred vision.
- Skin contact
- May cause skin irritation, itchiness and redness.
- Ingestion
- May cause irritation of mouth, throat and stomach, nausea, vomiting and diarrhoea.
- Inhalation
- May cause respiratory irritation, coughing, discomfort and difficulty breathing.
- Toxicity and irritation
- Based on classification principles, the classification criteria are not met.
12. Ecological Information
- Ecotoxicity
- No further relevant information available.
- Persistence and degradability
- No further relevant information available.
- Bioaccumulative potential
- No further relevant information available.
- Other adverse effects
- No further relevant information available.
13. Disposal Considerations
General information
- Dispose according to applicable local and state government regulations.
- Special Precautions for Landfill or Incineration: Please consult your state Land Waste Management Authority for more information.
14. Transport Information
ADG label required
- HAZCHEM
- Not available.
- UN Number
- None.
- Proper shipping name
- Not regulated.
- Transport hazard class
- 0
- Packing group
- None.
- Environmental hazard
- No
- Special precautions for users
- No information available.
- Additional information
- No information available.
15. Regulatory Information
- Poisons Schedule Number
- Not Scheduled.
- Other Information
- No further relevant information available.
16. Other Information
- SDS preparation date
- 27 November 2024
- Comments
- This information is based on our present knowledge. However, this shall not constitute a guarantee for any specific product features and shall not establish a legally valid contractual relationship.
