Pipes Buffer, Powder

1. Identification

Product Identifiers

Product Name

Pipes Buffer, Powder

Other Names

Pipes, 1.5 Sodium Salt

Product Number(s)

19230, 19240, C022, C0221

CAS Number

10010-67-0

Recommended use of the chemical and restriction on use

Company Details

Emergency Contact Details

2. Hazards Identification

Classification of the substance or mixture

Label Elements

Signal Words

Warning

Hazard Statement(s)

• Causes skin irritation.
• Causes serious eye irritation.
• May cause an allergic skin reaction.

Precautionary Statement(s)

• Avoid breathing dust/fume/gas/mist/vapours/spray.
• Wash thoroughly after handling.
• Contaminated work clothing should not be allowed out of the workplace.
• Wear protective gloves/eye protection/face protection.

Primary route(s) of entry

Human Health

Inhalation

Not available.

Ingestion

Not available.

Eyes

Rinse cautiously with water for several minutes. Remove contact lenses, if present ant easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention.

Skin

Wash with plenty of water. Take off contaminated clothing and wash it before reuse. If skin irritation or rash occurs: Get medical advice/attention.

Environment

3. Composition / Information on Ingredients

4. First Aid Measures

Ingestion

If symptoms persist consult doctor.

Inhalation

• Supply fresh air and be sure call for a doctor.
• In case of unconsciousness place patient stably in side position for transportation.

Skin Contact

Immediately wash with water and soap and rinse thoroughly.

Eye Contact

Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor.

Other Information

No further relevant information available.

5. Firefighting Measures

Suitable extinguishing equipment

Fire

CO₂, powder or water spray. Fight larger fires with water spray or alcohol resistant foam.

HAZCHEM

Not available.

Special protective equipment and precautions for fire fighters

6. Accidental Release Measures

Personal precautions, protective equipment and emergency procedures

Not required.

Environmental precautions

No special measures required.

Methods and materials for containment and clean up

• Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).
• Ensure adequate ventilation.

7. Handling and Storage

Precautions for safe handling

• Ensure good ventilation/exhaustion at the workplace.
• Prevent formation of aerosols.

Conditions for safe storage

Keep container tightly sealed.

8. Exposure Controls / Personal Protection

Exposure Standards

Engineering controls

• Keep away from foodstuffs, beverages and feed.
• Immediately remove all soiled and contaminated clothing.
• Wash hands before breaks and at the end of work.
• Avoid contact with the eyes and skin.

Personal protective equipment

Eye and face protection

• Tightly sealed goggles.
• Avoid contact with the eyes and skin.

Skin protection

The glove material has to be impermeable and resistant to the product/ the substance/ the preparation. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation. The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.

Body protection

• Keep away from foodstuffs, beverages and feed.
• Immediately remove all soiled and contaminated clothing .
• Wash hands before breaks and at the end of work.

Respiratory protection

• In case of brief exposure or low pollution use respiratory filter device.
• In case of intensive or longer exposure use self-contained respiratory protective device.

9. Physical and Chemical Properties

General information

Appearance

White powder

Odour

Characteristic

pH

Not determined.

Vapour Pressure

Not determined.

Density

Not determined.

Boiling Point

Undetermined.

Melting Point

Undetermined.

Solubility

Not miscible or difficult to mix with water

Specific Gravity of Density

Not determined

Flash Point

Not applicable.

Flammable (Explosive) Limits

Not determined.

Ignition Temperature

Not determined.

Formula

[Piperazine-N,N-bis(2-ethanesulfonic acid,)1.5 Sodium]

10. Stability and Reactivity

Reactivity

No further relevant information available.

Chemical stability

No decomposition if used according to specifications.

Possibility of hazardous reactions

No dangerous decomposition products known.

Conditions to avoid

No further relevant information available.

Incompatible materials

No further relevant information available.

11. Toxicological Information

Acute effects

No further relevant information available.

Eye contact

Irritating effect.

Skin contact

Irritant to skin and mucous membranes. Sensitisation possible through skin contact.

Ingestion

No further relevant information available.

Inhalation

No further relevant information available.

Toxicity and irritation

No further relevant information available.

12. Ecological Information

Ecotoxicity

No further relevant information available.

Persistence and degradability

No further relevant information available.

Bioaccumulative potential

No further relevant information available.

Other adverse effects

Not known to be hazardous to water.

13. Disposal Considerations

General information

14. Transport Information

ADG label required

HAZCHEM

Not available.

UN Number

None.

Proper shipping name

Not regulated.

Transport hazard class

0

Packing group

None.

Environmental hazard

No

Special precautions for users

Not applicable.

Additional information

Not applicable.

15. Regulatory Information

Poisons Schedule Number

Not applicable.

Other Information

No further relevant information available.

16. Other Information

SDS preparation date

27 February 2026

Comments

This information is based on our present knowledge. However, this shall not constitute a guarantee for any specific product features and shall not establish a legally valid contractual relationship.