PELCO® High Performance Ceramic Adhesive

1. Identification

Product Identifiers

Product Name

PELCO High Performance Ceramic Adhesive

Other Names

Not available

Product Number(s)

16026, 16026-10, I026

CAS Number

Not available.

Recommended use of the chemical and restriction on use

Company Details

Emergency Contact Details

2. Hazards Identification

Classification of the substance or mixture

Label Elements

Signal Words

Warning

Hazard Statement(s)

• GHS Hazard Determining Components:
• Silicate Solution
• Aluminium Oxide
• H303 Harmful if swallowed.
• H315 Causes skin irritation.
• H319 Causes serious eye irritation.

Precautionary Statement(s)

• P264 Wash hands thoroughly after handling.
• P280 Wear protective gloves. Wear eye protection.
• P302±P352 IF ON SKIN: Wash with plenty of soap and water.
• P332±P313 If skin irritation occurs: Get medical advice/attention.
• P305±P351±P338 IF IN EYES: Remove contact lenses, if present and easy to do. Rinse cautiously with water for several minutes.
• P301±P312 IF SWALLOWED: Call a poison centre or doctor if you feel unwell.
• P362 Take off contaminated clothing and wash before reuse.
• P501 Dispose in accordance with local, regional, national or international regulations.

Primary route(s) of entry

Human Health

Inhalation

Mist may cause irritation to respiratory tract.

Ingestion

May cause irritation to mouth, oesophagus and stomach.

Eyes

May cause moderate irritation to eyes.

Skin

May cause moderate irritation to skin.

Environment

3. Composition / Information on Ingredients

4. First Aid Measures

Ingestion

If swallowed, do not induce vomiting. If victim is conscious and alert, give 1-2 glasses of water to drink. Do not give anything by mouth to an unconscious person. Seek medical attention immediately.

Inhalation

In case of inhalation due to spray mist, machining dust or dried particulate, remove source of exposure and assure that victim is breathing. If not breathing, administer cardio-pulmonary resuscitation (CPR).

Skin Contact

Immediately wipe excess material off skin with a dry cloth then wash with soap and water for at least 5 minutes.

Eye Contact

Hold eyelids open and flush with a steady, gentle stream of water for at least 15 minutes. Seek immediate medical attention, preferably with an ophthalmologist.

Other Information

Medical conditions possibly aggravated by exposure: Inhalation of product may aggravate existing chronic respiratory problems such as asthma, emphysema or bronchitis. Skin contact may aggravate existing skin disease.

5. Firefighting Measures

Suitable extinguishing equipment

Fire

This material is compatible with all fire-extinguishing media.

HAZCHEM

This material is non-combustible.

Special protective equipment and precautions for fire fighters

6. Accidental Release Measures

Personal precautions, protective equipment and emergency procedures

Wear chemical goggles, body-covering protective clothing, chemical resistant gloves, and rubber boots. Use NIOSH approved respirator where mist occurs.

Environmental precautions

Not available.

Methods and materials for containment and clean up

Mop up and neutralize liquid, then discharge to sewer in accordance with federal, state and local regulations or permits. Flush area with water to complete clean-up. Exercise caution during neutralization as heat may be generated. Dispose of waste according to Federal, State and Local regulations.

7. Handling and Storage

Precautions for safe handling

Avoid contact with eyes, skin clothing. Avoid breathing spray mist. Keep container closed. Promptly clean residue from closures with cloth dampened with water. Promptly clean up spills.

Conditions for safe storage

Store in an area that is cool, dry, well ventilated, away from combustible material, and away from ignition sources. Keep containers closed. Store in clean plastic or stainless-steel containers. Store at room temperature.

8. Exposure Controls / Personal Protection

Exposure Standards

Engineering controls

Use with adequate ventilation. Keep containers closed. Safety shower and eyewash fountain should be within direct access.

Personal protective equipment

Eye and face protection

Wear chemical goggles.

Skin protection

Wear body-covering protective gloves.

Body protection

Wear protective clothing.

Respiratory protection

This product is not considered breathable in either the liquid or cured forms. However, if the cured product is polished, ground or chipped during processing, handling or use, powders may be released as airborne particles that could be inhaled. In these instances, appropriate personal protection equipment and local ventilation controls must be employed. If exposure limits are exceeded, and local ventilation is unavailable, a supplied-air respirator or self-contained NIOSH-approved dust and mist respirator is required.

9. Physical and Chemical Properties

General information

Appearance

Viscous white paste

Odour

Odourless

pH

11.0-11.5

Vapour Pressure

NA

Density

ND

Boiling Point

100°C

Melting Point

NA

Solubility

Soluble

Specific Gravity of Density

2.30

Flash Point

NA

Flammable (Explosive) Limits

NA

Ignition Temperature

NA

Formula

NA

10. Stability and Reactivity

Reactivity

Will not occur.

Chemical stability

This material is stable under all conditions of use and storage.

Possibility of hazardous reactions

None.

Conditions to avoid

Prolonged contact with aluminium, brass, copper, lead, and zinc may produce flammable hydrogen gas.

Incompatible materials

Gels and heats when mixed with acid. May react with ammonium salts resulting in evolution of ammonia gas.

11. Toxicological Information

Acute effects

• Silicate solution, 1344-09-8
• LD50 Oral, 1153 mg/kg (rat)
• LD50 Inhalation, ND
• LD50 Dermal, 4640 mg/kg (rabbit)

Eye contact

Irritating to eyes.

Skin contact

Irritating to skin.

Ingestion

Not available

Inhalation

Not available

Toxicity and irritation

Suspected carcinogen.

12. Ecological Information

Ecotoxicity

This material is believed to be practically non-toxic to aquatic life.

Persistence and degradability

This material is believed to persist in the environment. This material is inorganic and not subject to biodegradation.

Bioaccumulative potential

This mater is not expected to bioconcentrate in organisms.

Other adverse effects

Sinks and mixes with water. Only water will evaporate from this material.

13. Disposal Considerations

General information

14. Transport Information

ADG label required

HAZCHEM

This material is non-combustible.

UN Number

Not regulated.

Proper shipping name

Not regulated.

Transport hazard class

Not regulated.

Packing group

Not regulated.

Environmental hazard

Not regulated.

Special precautions for users

Not regulated.

Additional information

Not regulated.

15. Regulatory Information

Poisons Schedule Number

This product does not contain any reportable substances.

Other Information

Proscitech make no warranty of any kind regarding the information furnished herein. Users should independently determine the suitability and completeness of information from all sources. While this data is presented in good faith and believed to be accurate, it should be considered only as a supplement to other information gathered by the user. It is the User's responsibility to assure the proper use and disposal of these materials as well as the safety and health of all personnel who may work with or otherwise come in contact with these materials.

16. Other Information

SDS preparation date

29 November 2024

Comments

This information is based on our present knowledge. However, this shall not constitute a guarantee for any specific product features and shall not establish a legally valid contractual relationship.