Safety Data Sheets / N,N-Dimethylaminoethyl Methacrylate (DMA)

Safety Data Sheet

N,N-Dimethylaminoethyl Methacrylate (DMA)

Version 1Last reviewed 29 November 2024Catalogue: 13350, EMS13350

1. Identification

Product Identifiers

Product Name: N,N-Dimethylaminoethyl Methacrylate (DMA)
Other Names: Not available
Product Number(s): 13350, EMS13350
CAS Number: 2867-47-2

Recommended use of the chemical and restriction on use

Laboratory chemicals

Company Details

ProSciTech Pty Ltd
11 Carlton Street
KIRWAN QLD 4817
Australia
(07) 4773 9444
pst@proscitech.com
proscitech.com.au

Emergency Contact Details

ProSciTech Pty Ltd
11 Carlton Street
KIRWAN QLD 4817
Australia
(07) 4773 9444
pst@proscitech.com
proscitech.com.au

2. Hazards Identification

Classification of the substance or mixture

GHS05 Corrosion
Skin Corr. 1B H314 Causes severe skin burns and eye damage.
Eye Dam. 1 H318 Causes serious eye damage.
GHS07
Acute Tox. 4 H302 Harmful if swallowed.
Acute Tox. 4 H312 Harmful in contact with skin.
Skin Sens. 1 H317 May cause an allergic skin reaction.
Flam. Liq. 4 H227 Combustible liquid.

Label Elements

Signal Words: None
Hazard Statement(s): Combustible liquid.
Harmful if swallowed.
Harmful in contact with skin.
Causes severe skin burns and eye damage.
May cause an allergic skin reaction.
Precautionary Statement(s): Keep away from flames and hot surfaces - No smoking.
Do not breathe dusts or mists.
Wash thoroughly after handling.
Do not eat, drink or smoke when using this product.
Contaminated work clothing should not be allowed out of the workplace.
Wear protective gloves/protective clothing/eye protection/face protection.

Primary route(s) of entry

Not available.

Human Health

Inhalation: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
Ingestion: Call a POISON CENTER/doctor if you feel unwell. Rinse mouth. Do NOT induce vomiting.
Eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a POISON CENTER/doctor.
Skin: (or hair) Remove/take off immediately all contaminated clothing. Rinse skin with water/shower. Take off contaminated clothing and wash it before reuse. If skin irritation or rash occurs: Get medical advice/attention.

Environment

In case of fire: Use CO₂, powder or water spray for extinction.
Store in a well-ventilated place. Keep cool.
Store locked up.
Dispose of contents/container in accordance with local/regional/national/international regulations.

3. Composition / Information on Ingredients

No information provided.

4. First Aid Measures

Ingestion: Call for a doctor immediately.
Inhalation: Supply fresh air and to be sure call for a doctor.
In case of unconsciousness place patient stably in side position for transportation.
Skin Contact: Immediately wash with water and soap and rinse thoroughly.
Eye Contact: Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor.
Other Information: Symptoms of poisoning may even occur after several hours; therefore medical observation for at least 48 hours after the accident.

5. Firefighting Measures

Suitable extinguishing equipment

Fire: CO₂, powder or water spray. Fight larger fires with water spray or alcohol resistant foam.
HAZCHEM: No further relevant information available.

Special protective equipment and precautions for fire fighters

No special measures required.

6. Accidental Release Measures

Personal precautions, protective equipment and emergency procedures: Not required.
Environmental precautions: Dilute with plenty of water.
Do not allow to enter sewers/surface or ground water.
Methods and materials for containment and clean up: Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).
Dispose contaminated material as waste according to item 13.

7. Handling and Storage

Precautions for safe handling: No special precautions are necessary if used correctly.
Conditions for safe storage: Keep container tightly sealed.

8. Exposure Controls / Personal Protection

Exposure Standards

Engineering controls: Keep away from foodstuffs, beverages and feed.
Immediately remove all soiled and contaminated clothing.
Wash hands before breaks and at the end of work.
Avoid contact with the eyes and skin.

Personal protective equipment

Eye and face protection: Tightly sealed goggles.
Skin protection: Protective gloves. The glove material has to be impermeable and resistant to the product/the substance/the preparation. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation. The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.
Body protection: Wear protective clothing.
Respiratory protection: Not required.

9. Physical and Chemical Properties

General information

Appearance: Clear liquid
Odour: Amine-like
pH: Not determined
Vapour Pressure: 13.3hPa at 75°C
Density: 0.933g/cm³ at 20°C
Boiling Point: 182-192°C
Melting Point: -30°C
Solubility: Fully miscible
Specific Gravity of Density: Not available
Flash Point: 64°C
Flammable (Explosive) Limits: Not determined
Ignition Temperature: 200°C
Formula: C8H15NO2

10. Stability and Reactivity

Reactivity: No further relevant information available.
Chemical stability: No decomposition if used according to specifications.
Possibility of hazardous reactions: No dangerous reactions known.
Conditions to avoid: No further relevant information available.
Incompatible materials: No further relevant information available.

11. Toxicological Information

Acute effects: Oral LD50 1751 mg/kg (rat)
Inhalative LC50/4 h 0.62 mg/l (rat)
Eye contact: Irritating effect.
Skin contact: Irritant to skin and mucous membranes. Sensitisation possible through skin contact.
Ingestion: Not available.
Inhalation: Not available.
Toxicity and irritation: Not available.

12. Ecological Information

Ecotoxicity: No further relevant information available.
Persistence and degradability: No further relevant information available.
Bioaccumulative potential: No further relevant information available.
Other adverse effects: Water hazard class 1: slightly hazardous for water.
Do not allow undiluted product or large quantities of it to reach ground water. water course or sewage system.

13. Disposal Considerations

General information

Must not be disposed together with household garbage. Do not allow product to reach sewage system.
Disposal must be made according to official regulations.
Recommended cleansing agents: Water, if necessary together with cleansing agents.

14. Transport Information

ADG label required

HAZCHEM: No further relevant information available.
UN Number: UN2522
Proper shipping name: 2522 2-DIMETHYLAMINOETHYL METHACRYLATE, STABILIZED.
Transport hazard class: Class 6.1 Toxic substances
Packing group: II
Environmental hazard: Not applicable.
Special precautions for users: Warning: Toxic substances.
Hazard identification number (Kemler code): 69
EMS Number: 6.1-02
Stowage Category: D
Stowage code: SW2 Clear of living quarters
Additional information: Limited quantities (LQ): 100mL
Excepted quantities (EQ) Code: E4
Maximum net quantity per inner packaging: 1mL
Maximum net quantity per outer packaging: 500mL
Transport category: 2
Tunnel restriction code: D/E

15. Regulatory Information

Poisons Schedule Number: Substance is not listed.
Other Information: A Chemical Assessment has not been carried out.

16. Other Information

SDS preparation date: 29 November 2024
Comments: This information is based on our present knowledge. However, this shall not constitute a guarantee for any specific product features and shall not establish a legally valid contractual relationship.