Mikrostik Adhesive, Non-Conductive

1. Identification

Product Identifiers

Product Name

Mikrostik Adhesive, Non-Conductive

Other Names

Not available.

Product Number(s)

12646-01, EMS12646-01

CAS Number

Not available

Recommended use of the chemical and restriction on use

Company Details

Emergency Contact Details

2. Hazards Identification

Classification of the substance or mixture

Label Elements

Signal Words

None

Hazard Statement(s)

• Hazard-determining components of labelling:
• METHYL ETHYL KETONE
• toluene
• Highly flammable liquid and vapour.
• Harmful if swallowed.
• Causes serious eye irritation.
• May cause allergy or asthma symptoms or breathing difficulties if inhaled.
• Suspected of damaging fertility or the unborn child.
• May cause drowsiness or dizziness.
• May cause damage to organs through prolonged or repeated exposure.

Precautionary Statement(s)

• Obtain special instructions before use.
• Do not handle until all safety precautions have been read and understood.
• Keep away from heat/sparks/open flames/hot surfaces. - No smoking.
• Ground/bond container and receiving equipment.
• Use explosion-proof electrical/ventilating/lighting/equipment.
• Use only non-sparking tools.
• Take precautionary measures against static discharge.
• Do not breathe dust/fume/gas/mist/vapours/spray.
• Wash thoroughly after handling.
• Do not eat, drink or smoke when using this product.
• Use only outdoors or in a well-ventilated area.
• Wear protective gloves/protective clothing/eye protection/face protection.
• (In case of inadequate ventilation) wear respiratory protection.

Primary route(s) of entry

Human Health

Inhalation

Remove person to fresh air and keep comfortable for breathing. If experiencing respiratory symptoms: Call a poison centre/doctor.

Ingestion

Call a poison centre/doctor if you feel unwell.

Eyes

Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If exposed or concerned: Get medical advice/attention. If eye irritation persists: Get medical advice/attention.

Skin

(Or hair) Take off immediately all contaminated clothing. Rinse skin with water/shower. Get medical advice/attention if you feel unwell.

Environment

3. Composition / Information on Ingredients

4. First Aid Measures

Ingestion

Immediately call a doctor.

Inhalation

Supply fresh air; consult doctor in case of complaints.

Skin Contact

Generally the product does not irritate the skin.

Eye Contact

Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor.

Other Information

Symptoms of poisoning may even occur after several hours; therefore medical observation for at least 48 hours after the accident.

5. Firefighting Measures

Suitable extinguishing equipment

Fire

CO₂, extinguishing powder or water spray. Fight larger fires with water spray or alcohol resistant foam.

HAZCHEM

No further relevant information available.

Special protective equipment and precautions for fire fighters

6. Accidental Release Measures

Personal precautions, protective equipment and emergency procedures

Wear protective equipment. Keep unprotected persons away.

Environmental precautions

• Dilute with plenty of water.
• Do not allow to enter sewers/surface or ground water.

Methods and materials for containment and clean up

• Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).
• Dispose contaminated material as waste according to item 13.
• Ensure adequate ventilation.

7. Handling and Storage

Precautions for safe handling

• Ensure good ventilation/exhaustion at the workplace.
• Prevent formation of aerosols.
• Keep ignition sources away - Do not smoke.
• Protect from heat.
• Protect against electrostatic charges.

Conditions for safe storage

• Store in a cool location.
• Keep receptacle tightly sealed.
• Store in cool, dry conditions in well sealed receptacles.
• Protect from heat and direct sunlight.

8. Exposure Controls / Personal Protection

Exposure Standards

Engineering controls

• Keep away from foodstuffs, beverages and feed.
• Immediately remove all soiled and contaminated clothing.
• Wash hands before breaks and at the end of work.
• Avoid contact with the eyes.
• Avoid contact with the eyes and skin.

Personal protective equipment

Eye and face protection

Tightly sealed goggles.

Skin protection

Protective gloves. The glove material has to be impermeable and resistant to the product/the substance/the preparation. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation. The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.

Body protection

Protective clothing.

Respiratory protection

In case of brief exposure or low pollution use respiratory filter device. in case of intensive or longer exposure use respiratory protective device that is independent of circulating air.

9. Physical and Chemical Properties

General information

Appearance

Clear liquid

Odour

Pungent

pH

Not determined

Vapour Pressure

105 hPa

Density

0.85g/cm³

Boiling Point

79°C

Melting Point

Undetermined

Solubility

Fully miscible.

Specific Gravity of Density

Not available.

Flash Point

-6°C

Flammable (Explosive) Limits

• Lower: 1.8 Vol%
• Upper: 11.5 Vol%

Ignition Temperature

405°C

Formula

Not available.

10. Stability and Reactivity

Reactivity

No further relevant information available.

Chemical stability

No decomposition if used according to specifications.

Possibility of hazardous reactions

No dangerous reactions known.

Conditions to avoid

No further relevant information available.

Incompatible materials

No further relevant information available.

11. Toxicological Information

Acute effects

• 78-93-3 METHYL ETHYL KETONE
• Oral LD50 3300 mg/kg (rat)
• Dermal LD50 5000 mg/kg (rabbit)

Eye contact

Irritating effect.

Skin contact

No irritant effect.

Ingestion

Not available.

Inhalation

Sensitization possible through inhalation.

Toxicity and irritation

• Harmful
• Irritant

12. Ecological Information

Ecotoxicity

No further relevant information available.

Persistence and degradability

No further relevant information available.

Bioaccumulative potential

No further relevant information available.

Other adverse effects

• Water hazard class 1: slightly hazardous for water.
• Do not allow undiluted product or large quantities of it to reach ground water, water course or sewage system.

13. Disposal Considerations

General information

14. Transport Information

ADG label required

HAZCHEM

No further relevant information available.

UN Number

UN1993

Proper shipping name

1993 FLAMMABLE LIQUID, N.O.S. (ETHYL METHYL KETONE (METHYL ETHYL KETONE))

Transport hazard class

Class 3 Flammable liquids.

Packing group

III

Environmental hazard

Not applicable.

Special precautions for users

• Warning: Flammable liquids
• Hazard identification number (Kemler code): 33
• EMS Number: F-E,S-E
• Stowage category: B

Additional information

• DOT
• Quantity limitations:
• On passenger aircraft/rail: 5L
• On cargo aircraft only: 60L
• ADR
• Excepted quantities (EQ) Code: E1
• Maximum net quantity per inner packaging: 30mL
• Maximum net quantity per outer packaging: 1000mL
• IMDG
• Limited quantities (LQ) 1L
• Excepted quantities (EQ) Code: E2
• Maximum net quantity per inner packaging: 30mL
• Maximum net quantity per outer packaging: 500ml

15. Regulatory Information

Poisons Schedule Number

• Carcinogenic categories
• EPA (Environmental Protection Agency)
• 78-93-3 METHYL ETHYL KETONE I
• 108-88-3 toluene II
• TLV (Threshold Limit Value)
• 9002-86-2 polyvinyl chloride A4
• 108-88-3 toluene A4

Other Information

A Chemical Safety Assessment has not been carried out.

16. Other Information

SDS preparation date

18 April 2023

Comments

This information is based on our present knowledge. However, this shall not constitute a guarantee for any specific product features and shall not establish a legally valid contractual relationship.