M-Bond Resin Kits - 43-B

1. Identification

Product Identifiers

Product Name

M-Bond Resin Kits - 43-B

Other Names

M-Bond 43-B

Product Number(s)

50410-10

Recommended use of the chemical and restriction on use

Company Details

Emergency Contact Details

2. Hazards Identification

Label Elements

Signal Words

None

Hazard Statement(s)

• Highly flammable liquid and vapour.
• Harmful in contact with skin.
• Causes skin irritation.
• Causes serious eye irritation.
• May cause an allergic skin reaction.
• May cause drowsiness or dizziness.

Precautionary Statement(s)

• Keep away from heat/sparks/open flames/hot surfaces. - No smoking.
• Use explosion-proof electrical/ventilating/lighting/equipment.
• Avoid breathing dust/fume/gas/mist/vapours/spray
• Wear protective gloves / eye protection / face protection.
• Wear protective gloves.
• Wear protective gloves / protective clothing.
• Wear eye protection / face protection.
• Ground/bond container and receiving equipment.
• Use only non-sparking tools.
• Take precautionary measures against static discharge.
• Wash thoroughly after handling.
• Use only outdoors or in a well-ventilated area.
• Contaminated work clothing must not be allowed out of the workplace.
• IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.
• If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do.
• Continue rinsing.
• Specific treatment (see on this label).
• IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
• Call a poison center/doctor if you feel unwell.
• Wash contaminated clothing before reuse.
• If skin irritation or rash occurs: Get medical advice/attention.
• If eye irritation persists: Get medical advice/attention.
• In case of fire: Use for extinction: CO₂, powder or water spray.
• Take off contaminated clothing and wash it before reuse.
• Store locked up.
• Store in a well-ventilated place. Keep container tightly closed.
• Store in a well-ventilated place. Keep cool.
• Dispose of contents/container in accordance with local/regional/national/international regulations

Human Health

Inhalation

May cause drowsiness or dizziness

Ingestion

No data available

Eyes

Causes serious eye irritation

Skin

Harmful in contact with skin

3. Composition / Information on Ingredients

4. First Aid Measures

Ingestion

If symptoms persist consult doctor.

Inhalation

• Supply fresh air and to be sure call for a doctor
• In case of unconsciousness place patient stably in side position for transportation.

Skin Contact

: Immediately wash with water and soap and rinse thoroughly.

Eye Contact

Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor.

Other Information

Symptoms of poisoning may even occur after several hours; therefore medical observation for at least 48 hours after the accident.

5. Firefighting Measures

Suitable extinguishing equipment

Fire

CO₂, extinguishing powder or water spray. Fight larger fires with water spray or alcohol resistant foam

HAZCHEM

No further relevant information available

Special protective equipment and precautions for fire fighters

6. Accidental Release Measures

Personal precautions, protective equipment and emergency procedures

Wear protective equipment. Keep unprotected persons away

Environmental precautions

• Dilute with plenty of water.
• Do not allow to enter sewers/ surface or ground water

Methods and materials for containment and clean up

• Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).
• Dispose contaminated material as waste according to item 13
• Ensure adequate ventilation.

7. Handling and Storage

Precautions for safe handling

• Ensure good ventilation/exhaustion at the workplace.
• Prevent formation of aerosols
• Keep ignition sources away - Do not smoke.
• Protect from heat.
• Protect against electrostatic charges.

Conditions for safe storage

• Keep receptacle tightly sealed.
• Store in cool, dry conditions in well sealed receptacles.
• Protect from heat and direct sunlight.

8. Exposure Controls / Personal Protection

Exposure Standards

Engineering controls

• Keep away from foodstuffs, beverages and feed.
• Immediately remove all soiled and contaminated clothing.
• Wash hands before breaks and at the end of work.
• Avoid contact with the eyes and skin

Personal protective equipment

Eye and face protection

Tightly sealed goggles

Skin protection

Protective gloves - The glove material has to be impermeable and resistant to the product/ the substance/ the preparation

Body protection

As above

Respiratory protection

In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer exposure use respiratory protective device that is independent of circulating air.

9. Physical and Chemical Properties

General information

Appearance

Amber coloured liquid

Odour

Acetone-like

pH

Not determined

Vapour Pressure

at 20 °C (68 °F) = 105 hPa (79 mm Hg)

Density

Not determined

Boiling Point

80 °C (176 °F)

Melting Point

Undetermined

Solubility

Fully miscible

Specific Gravity of Density

Not determined

Flash Point

-9 °C (16 °F)

Flammable (Explosive) Limits

Not flammable - Product is not explosive. However, formation of explosive air/vapour mixtures are possible.

Ignition Temperature

514 °C (957 °F)

Formula

• Organic solvents: 62.0 %
• VOC content: 75.0 %
• 750.0 g/l / 6.26 lb/gl

10. Stability and Reactivity

Chemical stability

No decomposition if used according to specifications

Possibility of hazardous reactions

No dangerous reactions known

Conditions to avoid

No decomposition if used according to specifications

Incompatible materials

No further relevant information available

11. Toxicological Information

Acute effects

Irritating to skin and mucous membranes

Eye contact

Irritating effect.

Skin contact

• Irritant to skin and mucous membranes.
• Sensitization possible through skin contact

Ingestion

No further relevant information available

Inhalation

Irritating effect.

Toxicity and irritation

• IARC (International Agency for Research on Cancer)
• 1330-20-7 Xylol, Isomerengemisch (wenn Flammpunkt<21 °C) -3
• 80-08-0 dapsone - 3

12. Ecological Information

Ecotoxicity

No further relevant information available

Persistence and degradability

No further relevant information available

Bioaccumulative potential

No further relevant information available

Other adverse effects

• Water hazard class 2 (Self-assessment): hazardous for water
• Do not allow product to reach ground water, water course or sewage system.
• Danger to drinking water if even small quantities leak into the ground

13. Disposal Considerations

General information

14. Transport Information

ADG label required

HAZCHEM

No further relevant information available

UN Number

UN1993

Proper shipping name

FLAMMABLE LIQUID, N.O.S. (ETHYL METHYL KETONE (METHYL ETHYL KETONE), XYLENES)

Transport hazard class

3

Packing group

II

Environmental hazard

No

Special precautions for users

Warning: Flammable liquids

Additional information

• DOT
• Quantity limitations On passenger aircraft/rail: 5 L
• On cargo aircraft only: 60 L
• ADR
• Excepted quantities (EQ) Code: E2
• Maximum net quantity per inner packaging: 30 mL
• Maximum net quantity per outer packaging: 500 mL
• IMDG
• Limited quantities (LQ) 1L
• Excepted quantities (EQ) Code: E2
• Maximum net quantity per inner packaging: 30 mL
• Maximum net quantity per outer packaging: 500 mL
• UN "Model Regulation": UN1993, Flammable liquids, n.o.s. (Ethyl methyl ketone, Xylenes), 3, II

15. Regulatory Information

Poisons Schedule Number

No further relevant information available

Other Information

A Chemical Safety Assessment has not been carried out

16. Other Information

SDS preparation date

24 February 2026

Comments

This information is based on our present knowledge. However, this shall not constitute a guarantee for any specific product features and shall not establish a legally valid contractual relationship.