LR White Resin, Uncatalysed

1. Identification

Product Identifiers

Product Name

LR White Resin, Uncatalysed

Other Names

N/A

Product Number(s)

C023, C024

CAS Number

-

Recommended use of the chemical and restriction on use

Company Details

Emergency Contact Details

2. Hazards Identification

Classification of the substance or mixture

Label Elements

Signal Words

Warning

Hazard Statement(s)

• May cause an allergic skin reaction.
• May damage fertility or the unborn child.

Precautionary Statement(s)

• Obtain special instructions before use.
• Do not handle until all safety precautions have been read and understood.
• Avoid breathing dust/fume/gas/mist/vapours/spray
• Contaminated work clothing must not be allowed out of the workplace.
• Wear protective gloves/protective clothing/eye protection/face protection/hearing protection.
• If on skin: Wash with plenty of water.
• IF exposed or concerned: Get medical advice/attention.
• Specific treatment (see on this label).
• Take off contaminated clothing and wash it before reuse.
• If skin irritation or rash occurs: Get medical advice/attention.
• Store locked up.
• Dispose of contents/container in accordance with local/regional/national/international regulations.

Primary route(s) of entry

Human Health

Inhalation

Not available.

Ingestion

Not available.

Eyes

Not available.

Skin

• If on skin: Wash with plenty of water.
• If skin irritation or rash occurs: Get medical advice/attention

Environment

3. Composition / Information on Ingredients

4. First Aid Measures

Ingestion

If symptoms persist consult doctor.

Inhalation

Supply fresh air; consult doctor in case of complaints. In case of unconsciousness place patient stably in side position for transportation.

Skin Contact

Immediately wash with water and soap and rinse thoroughly.

Eye Contact

Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor.

Other Information

After swallowing if symptoms persist consult doctor.

5. Firefighting Measures

Suitable extinguishing equipment

Fire

Use fire extinguishing methods suitable to surrounding conditions. CO₂, extinguishing powder or water spray. Fight larger fires with water spray or alcohol resistant foam

Large Fire

Use fire extinguishing methods suitable to surrounding conditions.

HAZCHEM

Not available.

Special protective equipment and precautions for fire fighters

6. Accidental Release Measures

Personal precautions, protective equipment and emergency procedures

Not required.

Environmental precautions

Inform respective authorities in case of seepage into water course or sewage system. Dilute with plenty of water. Do not allow to enter sewers/ surface or ground water.

Methods and materials for containment and clean up

Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust). Ensure adequate ventilation. Dispose contaminated material as waste according to item 13.

7. Handling and Storage

Precautions for safe handling

Ensure good ventilation/exhaustion at the workplace. Prevent formation of aerosols. Open and handle receptacle with care. Keep respiratory protective device available.

Conditions for safe storage

No special requirements.

8. Exposure Controls / Personal Protection

Exposure Standards

Engineering controls

Keep away from food stuffs, beverages and feed.

Personal protective equipment

Eye and face protection

Avoid contact with the eyes. Goggles recommended during refilling.

Skin protection

The glove material has to be impermeable and resistant to the product/ the substance/ the preparation.Due to missing tests no recommendation to the glove material can be given for the product/ the preparation/ the chemical mixture.Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation. The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance of the glove material can not be calculated in advance and has therefore to be checked prior to the application. The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.

Body protection

Immediately remove all soiled and contaminated clothing. Wash hands before breaks and at the end of work. Store protective clothing seperately.

Respiratory protection

In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer exposure use respiratory protective device that is independent of circulating air.

9. Physical and Chemical Properties

General information

Appearance

Liquid, Viscous, Colourless

Odour

Characteristic

pH

Not determined

Vapour Pressure

Not determined

Density

0.9785g/cm3 at 20°C

Boiling Point

<300 °C

Melting Point

Not available

Solubility

Not miscible or difficult to mix with water

Specific Gravity of Density

0.9785g/cm3

Flash Point

>93.3°C

Flammable (Explosive) Limits

Not available. Product does not present an explosion hazard.

Ignition Temperature

Product is not selfigniting

Formula

Not available.

10. Stability and Reactivity

Reactivity

No further relevant information available.

Chemical stability

No decomposition if used according to specifications.

Possibility of hazardous reactions

No dangerous reactions known.

Conditions to avoid

No further relevant information available.

Incompatible materials

No further relevant information available.

11. Toxicological Information

Acute effects

• 84-74-2 dibutyl phthalate
• Oral LD50 8000mg/kg (rat)
• Dermal LD50 20000mg/kg (rabbit)

Eye contact

No irritating effect.

Skin contact

Sensitisation possible through skin contact. No irritating effect.

Ingestion

No further relevant information available.

Inhalation

No further relevant information available.

Toxicity and irritation

• The product shows the following dangers according to internally approved calculation methods for preparations:
• Irritant

12. Ecological Information

Ecotoxicity

Water hazard class 1 (Self-assessment): slightly hazardous for water. Do not allow undiluted product or large quantities of it to reach ground water, water course or sewage system. Harmful to aquatic organisms

Persistence and degradability

No further relevant information available.

Bioaccumulative potential

No further relevant information available.

Other adverse effects

No further relevant information available.

13. Disposal Considerations

General information

14. Transport Information

ADG label required

HAZCHEM

Not available.

UN Number

3106 (Applies to the catalyst component)

Proper shipping name

Organic peroxide, type D, solid (Benzoyl Peroxide)

Transport hazard class

void

Packing group

None.

Environmental hazard

No information available.

Special precautions for users

Not regulated.

Additional information

Packages to be protected from direct sunlight/heat.

15. Regulatory Information

Poisons Schedule Number

94-36-0 dibenzoyl peroxide S2,S4, S5 and 84-74-2 dibutyl phthalate S10

Other Information

This product is classified and labelled according to the Globally Harmonised System (GHS). GHS07 Hazard.

16. Other Information

SDS preparation date

24 February 2026

Comments

• This information is based on our present knowledge. However, this shall not constitute a guarantee for any specific product features and shall not establish a legally valid contractual relationship.
• Date of preparation 04/08/2025
• Abbreviations and acronyms:
• ADR: Accord relatif au transport international des marchandises dangereuses par route (European Agreement Concerning the International
• Carriage of Dangerous Goods by Road)
• IMDG: International Maritime Code for Dangerous Goods
• DOT: US Department of Transportation
• IATA: International Air Transport Association
• EINECS: European Inventory of Existing Commercial Chemical Substances
• ELINCS: European List of Notified Chemical Substances
• CAS: Chemical Abstracts Service (division of the American Chemical Society)
• NFPA: National Fire Protection Association (USA)
• HMIS: Hazardous Materials Identification System (USA)

References

EMS LR Resin Uncatalysed https://www.emsdiasum.com/docs/technical/msds/14381-UC.pdf, 04/08/2025