Safety Data Sheets / Lowicryl - K11M Initiator C

Safety Data Sheet

Lowicryl - K11M Initiator C

Version 1Last reviewed 29 November 2024Catalogue: C450_1

1. Identification

Product Identifiers

Product Name: Lowicryl K11M - Initiator C
Other Names: Lowicryl K11M Kit
Product Number(s): C450_1
CAS Number: 3524-62-7

Recommended use of the chemical and restriction on use

Laboratory use.

Company Details

ProSciTech Pty Ltd
11 Carlton Street
KIRWAN QLD 4817
Australia
(07) 4773 9444
pst@proscitech.com
proscitech.com.au

Emergency Contact Details

ProSciTech Pty Ltd
11 Carlton Street
KIRWAN QLD 4817
Australia
(07) 4773 9444
pst@proscitech.com
proscitech.com.au

2. Hazards Identification

Classification of the substance or mixture

GHS06 Skull and crossbones
Acute Tox. 3 H301 Toxic if swallowed.
GHS07
Acute Tox. 4 H332 Harmful if inhaled.
Skin Irrit. 2 H315 Causes skin irritation.
Eye Irrit. 2 H319 Causes serious eye irritation

Label Elements

Signal Words: None
Hazard Statement(s): Toxic if swallowed.
Harmful if inhaled.
Causes skin irritation.
Causes serious eye irritation.
Precautionary Statement(s): Avoid breathing dust/fume/gas/mist/vapours/spray.
Wear protective gloves. Wear eye protection / face protection.
Wash thoroughly after handling.
Do not eat, drink or smoke when using this product.
Use only outdoors or in a well-ventilated area.

Primary route(s) of entry

Not available.

Human Health

Inhalation: Remove person to fresh air and keep comfortable for breathing. If skin irritation occurs: Get medical advice/attention.
Rinse mouth.
Ingestion: Immediately call a POISON CENTER/doctor. Rinse mouth.
Eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
If eye irritation persists: Get medical advice/attention.
Skin: Wash with plenty of water.
Take off contaminated clothing and wash it before reuse. If skin irritation occurs: Get medical advice/attention.

Environment

Store locked up.
Dispose of contents/container in accordance with local/regional/national/international regulations.

3. Composition / Information on Ingredients

Name	CAS No.	Content (w/w)	Classification
Benzoin Methyl Ether	3524-62-7	-	-

4. First Aid Measures

Ingestion: Do not induce vomiting; Call for medical help immediately.
Inhalation: In case of irregular breathing or respiratory arrest provide artificial respiration. Supply fresh air; consult doctor in case of complaints. In case of unconsciousness place patient stably in side position for transportation.
Skin Contact: Immediately remove any clothing soiled by the product. Immediately wash with water and soap and rinse thoroughly.
Eye Contact: Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor.
Other Information: Symptoms of poisoning may even occur after several hours; therefore medical observation for at least 48 hours after the accident.

5. Firefighting Measures

Suitable extinguishing equipment

Fire: CO₂, powder or water spray. Fight larger fires with water spray or alcohol resistant foam.
HAZCHEM: Not available.

Special protective equipment and precautions for fire fighters

No special measures required.

6. Accidental Release Measures

Personal precautions, protective equipment and emergency procedures: Not required.
Environmental precautions: Do not allow to enter sewers/ surface or ground water.
Methods and materials for containment and clean up: Dispose contaminated material as waste according to item 13.

7. Handling and Storage

Precautions for safe handling: No special precautions are necessary if used correctly.
Conditions for safe storage: Store in a dry place. Store in a closed container.
Keep container tightly sealed.
Keep cool.

8. Exposure Controls / Personal Protection

Exposure Standards

Engineering controls: Keep cool.

Personal protective equipment

Eye and face protection: Tightly sealed goggles.
Skin protection: Protection of hands.
The glove material has to be impermeable and resistant to the product/ the substance/ the preparation.
Due to missing tests no recommendation to the glove material can be given for the product/ the preparation/ the chemical mixture.
Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation.
Material of gloves.
The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer.
Penetration time of glove material.
The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.
Body protection: Keep away from foodstuffs, beverages and feed.
Immediately remove all soiled and contaminated clothing.
Wash hands before breaks and at the end of work.
Avoid contact with the eyes.
Avoid contact with the eyes and skin.
Respiratory protection: Not required.

9. Physical and Chemical Properties

General information

Appearance: Crystalline powder
Odour: Characteristic.
pH: Not applicable.
Vapour Pressure: Not applicable.
Density: Not determined.
Boiling Point: Not determined.
Melting Point: 50 °C
Solubility: Insoluble in water solubility at 20 °C
Specific Gravity of Density: Not applicable
Flash Point: 110 °C
Flammable (Explosive) Limits: Not determined.
Ignition Temperature: Not determined.
Formula: Not available.

10. Stability and Reactivity

Reactivity: No further relevant information available.
Chemical stability: No decomposition if used according to specifications.
Possibility of hazardous reactions: No dangerous decomposition products known.
Conditions to avoid: No further relevant information available.
Incompatible materials: Reducing agents.

11. Toxicological Information

Acute effects: No further relevant information available.
Eye contact: Irritating effect.
Skin contact: Irritant to skin and mucous membranes.
Ingestion: No further relevant information available.
Inhalation: No sensitising effects known.
Toxicity and irritation: No further relevant information available.

12. Ecological Information

Ecotoxicity: No further relevant information available.
Persistence and degradability: No further relevant information available.
Bioaccumulative potential: No further relevant information available.
Other adverse effects: Water hazard class 1 (German Regulation) (Self-assessment): slightly hazardous for water Do not allow undiluted product or large quantities of it to reach ground water, water course or sewage system.

13. Disposal Considerations

General information

Must not be disposed together with household garbage. Do not allow product to reach sewage system.
Uncleaned packaging
Recommendation: Disposal must be made according to official regulations.

14. Transport Information

ADG label required

HAZCHEM: Not available.
UN Number: UN3288
Proper shipping name: 3288 TOXIC SOLID, INORGANIC, N.O.S (Benzoin Methyl Ether)
Transport hazard class: 6.1 Toxic substances.
Packing group: III
Environmental hazard: No information available.
Special precautions for users: Warning: Toxic substances
Danger code (Kemler): 60
EMS Number: F-A,S-A
Stowage Category: A
Additional information: ADG
Limited quantities (LQ) 5 kg
Excepted quantities (EQ) Code: E1
Maximum net quantity per inner packaging: 30 g Maximum net quantity per outer packaging: 1000 g Transport category 2
Tunnel restriction code E

15. Regulatory Information

Poisons Schedule Number: Substance is not listed.
Other Information: No further relevant information available.

16. Other Information

SDS preparation date: 29 November 2024
Comments: This information is based on our present knowledge. However, this shall not constitute a guarantee for any specific product features and shall not establish a legally valid contractual relationship.