Lowicryl HM20 - Monomer E

1. Identification

Product Identifiers

Product Name

Lowicryl HM20 - Monomer E

Other Names

Lowicryl HM20 Resin; Lowicryl HM20 monostep

Product Number(s)

C440_1

CAS Number

-

Recommended use of the chemical and restriction on use

Company Details

Emergency Contact Details

2. Hazards Identification

Classification of the substance or mixture

Label Elements

Signal Words

None

Hazard Statement(s)

• Flammable liquid and vapour. Combustible liquid.
• Harmful if swallowed. Causes skin irritation.
• Causes serious eye irritation.
• May cause an allergic skin reaction.
• May cause respiratory irritation.
• May be fatal if swallowed and enters airways.

Precautionary Statement(s)

• Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
• Use explosion-proof electrical/ventilating/lighting/equipment.
• Avoid breathing dust/fume/gas/mist/vapours/spray.
• Wear protective gloves / eye protection / face protection.
• Ground/bond container and receiving equipment.
• Use only non-sparking tools.
• Take precautionary measures against static discharge.
• Wash thoroughly after handling.
• Do not eat, drink or smoke when using this product.
• Use only outdoors or in a well-ventilated area.
• Contaminated work clothing should not be allowed out of the workplace.

Primary route(s) of entry

Human Health

Inhalation

• Remove person to fresh air and keep comfortable for breathing.
• Call a POISON CENTER/doctor if you feel unwell.

Ingestion

Immediately call a POISON CENTER/ doctor.

Eyes

• Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Specific treatment (see on this label).
• If eye irritation persists: Get medical advice/attention.

Skin

• Wash with plenty of water. Take off contaminated clothing and wash it before reuse.
• If skin irritation occurs: Get medical advice/attention.

Environment

3. Composition / Information on Ingredients

4. First Aid Measures

Ingestion

Call for a doctor immediately.

Inhalation

In case of unconsciousness place patient stably in side position for transportation.

Skin Contact

Immediately wash with water and soap and rinse thoroughly.

Eye Contact

Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor.

Other Information

Symptoms of poisoning may even occur after several hours; therefore medical observation for at least 48 hours after the accident.

5. Firefighting Measures

Suitable extinguishing equipment

Fire

CO₂, sand, extinguishing powder. Do not use water.

HAZCHEM

Not available.

Special protective equipment and precautions for fire fighters

6. Accidental Release Measures

Personal precautions, protective equipment and emergency procedures

Wear protective equipment. Keep unprotected persons away.

Environmental precautions

Do not allow to enter sewers/ surface or ground water.

Methods and materials for containment and clean up

• Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).
• Dispose contaminated material as waste according to item 13. Ensure adequate ventilation.
• Do not flush with water or aqueous cleansing agents.

7. Handling and Storage

Precautions for safe handling

• Ensure good ventilation/exhaustion at the workplace.
• Prevent formation of aerosols.

Conditions for safe storage

• Keep container tightly sealed.
• Ensure good ventilation/exhaustion at the workplace.
• Prevent formation of aerosols.
• Keep ignition sources away - Do not smoke.
• Protect against electrostatic charge.
• Protect from heat and direct sunlight

8. Exposure Controls / Personal Protection

Exposure Standards

Engineering controls

• Protect from heat.
• Protect against electrostatic charges.

Personal protective equipment

Eye and face protection

Tightly sealed goggles.

Skin protection

• Protective gloves
• The glove material has to be impermeable and resistant to the product/ the substance/ the preparation.
• Due to missing tests no recommendation to the glove material can be given for the product/ the preparation/ the chemical mixture.
• Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation.
• Material of gloves
• The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer.
• Penetration time of glove material
• The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.

Body protection

• Keep away from foodstuffs, beverages and feed.
• Immediately remove all soiled and contaminated clothing.
• Wash hands before breaks and at the end of work.
• Avoid contact with the eyes and skin.

Respiratory protection

In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer exposure use self-contained respiratory protective device.

9. Physical and Chemical Properties

General information

Appearance

Colourless liquid

Odour

Ester-like

pH

Not determined.

Vapour Pressure

Not determined.

Density

Not determined.

Boiling Point

249 °C

Melting Point

Undetermined.

Solubility

Not miscible or difficult to mix with water.

Specific Gravity of Density

Not applicable.

Flash Point

76 °C

Flammable (Explosive) Limits

• Lower: 1.8 Vol %
• Upper: Not determined

Ignition Temperature

Product is not selfigniting.

Formula

Not available.

10. Stability and Reactivity

Reactivity

No further relevant information available.

Chemical stability

No decomposition if used according to specifications.

Possibility of hazardous reactions

May occur.

Conditions to avoid

Heat, agine, contamination, oxygen-free atmosphere and incompatible materials.

Incompatible materials

Reducing and oxidising agents.

11. Toxicological Information

Acute effects

• LD/LC50 values relevant for classification:
• 97-63-2 ethyl methacrylate
• Oral LD50 14800 mg/kg (rat)

Eye contact

Irritating effect.

Skin contact

Sensitisation possible through skin contact.

Ingestion

No further relevant information available.

Inhalation

Irritant to skin and mucous membranes,

Toxicity and irritation

• The product shows the following dangers according to the calculation method of the General EU Classification Guidelines for Preparations as issued in the latest version: Harmful
• Irritant

12. Ecological Information

Ecotoxicity

No further relevant information available.

Persistence and degradability

No further relevant information available.

Bioaccumulative potential

No further relevant information available.

Other adverse effects

• Water hazard class 2 (German Regulation) (Self-assessment): hazardous for water
• Do not allow product to reach ground water, water course or sewage system.
• Danger to drinking water if even small quantities leak into the ground.

13. Disposal Considerations

General information

14. Transport Information

ADG label required

HAZCHEM

Not available.

UN Number

UN1866

Proper shipping name

1866 RESIN SOLUTION

Transport hazard class

3 F

Packing group

III

Environmental hazard

Marine pollutant: Symbol (fish and tree)

Special precautions for users

Warning: Flammable liquids.

Additional information

• ADG
• Limited quantities (LQ) 5L
• Excepted quantities (EQ) Code: E1
• Maximum net quantity per inner packaging: 30 ml.
• Maximum net quantity per outer packaging: 1000 ml.
• Transport category 3 · Tunnel restriction code D/E.

15. Regulatory Information

Poisons Schedule Number

S5

Other Information

No further relevant information available.

16. Other Information

SDS preparation date

24 February 2026

Comments

This information is based on our present knowledge. However, this shall not constitute a guarantee for any specific product features and shall not establish a legally valid contractual relationship.