Lowicryl HM20 - Crosslinker D

1. Identification

Product Identifiers

Product Name

Lowicryl HM20 - Crosslinker D

Other Names

Lowicryl HM20 Resin, Triethylene Glycol Dimethacrylate; 2-Propenoic acid 2-methyl-, 1,2-ethanediylbis (oxy-2,1ethanediyl) ester; Tedma; Methacrylic acid, diester triethylene glycol

Product Number(s)

C440_2

CAS Number

109-16-0

Recommended use of the chemical and restriction on use

Company Details

Emergency Contact Details

2. Hazards Identification

Classification of the substance or mixture

Label Elements

Signal Words

None

Hazard Statement(s)

• Harmful if swallowed. Causes skin irritation.
• Causes serious eye damage.
• May cause an allergic skin reaction.
• Suspected of causing genetic defects.
• Suspected of causing cancer.
• May cause respiratory irritation.

Precautionary Statement(s)

• Avoid breathing dust/fume/gas/mist/vapours/spray.
• Wear protective gloves. Wear eye protection / face protection.
• Wash thoroughly after handling.
• Do not eat, drink or smoke when using this product.
• Use only outdoors or in a well-ventilated area.
• Contaminated work clothing should not be allowed out of the workplace.
• Obtain special instructions before use.
• Do not handle until all safety precautions have been read and understood.

Primary route(s) of entry

Human Health

Inhalation

• Remove person to fresh air and keep comfortable for breathing.
• Wash contaminated clothing before reuse.
• IF exposed or concerned: Get medical advice/attention.
• If skin irritation or rash occurs: Get medical advice/attention.
• Rinse mouth.

Ingestion

Call a POISON CENTER/doctor if you feel unwell.

Eyes

• Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• Immediately call a POISON CENTER/doctor.
• Specific treatment (see on this label).

Skin

Wash with plenty of water. Take off contaminated clothing and wash it before reuse.

Environment

3. Composition / Information on Ingredients

4. First Aid Measures

Ingestion

Call for a doctor immediately.

Inhalation

Supply fresh air and to be sure call for a doctor. In case of unconsciousness place patient stably in side position for transportation.

Skin Contact

Immediately wash with water and soap and rinse thoroughly.

Eye Contact

Rinse opened eye for several minutes under running water. Then consult a doctor.

Other Information

Symptoms of poisoning may even occur after several hours; therefore medical observation for at least 48 hours after the accident.

5. Firefighting Measures

Suitable extinguishing equipment

Fire

CO₂, powder or water spray. Fight larger fires with water spray or alcohol resistant foam.

HAZCHEM

Not available.

Special protective equipment and precautions for fire fighters

6. Accidental Release Measures

Personal precautions, protective equipment and emergency procedures

Not required.

Environmental precautions

Inform respective authorities in case of seepage into water course or sewage system. Do not allow to enter sewers/ surface or ground water.

Methods and materials for containment and clean up

Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust). Dispose contaminated material as waste according to item 13. Ensure adequate ventilation.

7. Handling and Storage

Precautions for safe handling

• Ensure good ventilation/exhaustion at the workplace.
• Prevent formation of aerosols.

Conditions for safe storage

• Store locked up.
• Store in a well-ventilated place. Keep container tightly closed.

8. Exposure Controls / Personal Protection

Exposure Standards

Engineering controls

No information available.

Personal protective equipment

Eye and face protection

Tightly sealed goggles

Skin protection

• Protective gloves
• The glove material has to be impermeable and resistant to the product/ the substance/ the preparation.
• Due to missing tests no recommendation to the glove material can be given for the product/ the preparation/ the chemical mixture.
• Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation ·
• Material of gloves
• The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. ·
• Penetration time of glove material
• The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.

Body protection

• Keep away from foodstuffs, beverages and feed.
• Immediately remove all soiled and contaminated clothing
• Wash hands before breaks and at the end of work.
• Avoid contact with the skin.
• Avoid contact with the eyes and skin.

Respiratory protection

In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer exposure use self-contained respiratory protective device.

9. Physical and Chemical Properties

General information

Appearance

Colourless liquid

Odour

Mild

pH

Not determined.

Vapour Pressure

Not determined.

Density

20 °C: 1.07 g/cm³

Boiling Point

Undetermined.

Melting Point

Undetermined.

Solubility

Not miscible or difficult to mix with water.

Specific Gravity of Density

Not determined.

Flash Point

Not applicable.

Flammable (Explosive) Limits

Not determined.

Ignition Temperature

Not determined.

Formula

Not available.

10. Stability and Reactivity

Reactivity

No further relevant information available.

Chemical stability

No decomposition if used according to specifications.

Possibility of hazardous reactions

No dangerous reactions known.

Conditions to avoid

No further relevant information available.

Incompatible materials

Oxidizing agents,

11. Toxicological Information

Acute effects

No further relevant information available.

Eye contact

Strong irritant with the danger of severe eye injury.

Skin contact

Sensitisation possible through skin contact

Ingestion

No further relevant information available.

Inhalation

Irritant to skin and mucous membranes.

Toxicity and irritation

No further relevant information available.

12. Ecological Information

Ecotoxicity

No further relevant information available.

Persistence and degradability

No further relevant information available.

Bioaccumulative potential

No further relevant information available.

Other adverse effects

• Water hazard class 1 (German Regulation) (Self-assessment): slightly hazardous for water Do not allow undiluted product or large quantities of it to reach ground water, water course or sewage system. Also poisonous for fish and plankton in water bodies.
• Very toxic for aquatic organisms.
• Very toxic for fish.

13. Disposal Considerations

General information

14. Transport Information

ADG label required

HAZCHEM

Not available.

UN Number

UN1993

Proper shipping name

1 9 9 3 F L A M M A B L E L I Q U I D , N . O . S . , ENVIRONMENTALLY HAZARDOUS.

Transport hazard class

0

Packing group

III

Environmental hazard

No information available.

Special precautions for users

Not applicable.

Additional information

• ADG
• Limited quantities (LQ) 5L
• Excepted quantities (EQ) Code: E1
• Maximum net quantity per inner packaging: 30 mL Maximum net quantity per outer packaging: 1000 ml

15. Regulatory Information

Poisons Schedule Number

S2, S4, S6

Other Information

No further relevant information available.

16. Other Information

SDS preparation date

24 February 2026

Comments

This information is based on our present knowledge. However, this shall not constitute a guarantee for any specific product features and shall not establish a legally valid contractual relationship.