Safety Data Sheets / Light Green SF Yellowish, C.I. 42095

Safety Data Sheet

Light Green SF Yellowish, C.I. 42095

Version 1Last reviewed 27 November 2024Catalogue: C121, C1211, C1215

1. Identification

Product Identifiers

Product Name: Light Green SF Yellowish, C.I. 42095
Other Names: Acid Brilliant Green 5; Acid Green 5; FD&C Green Number 2; Food Green 2; Pencil
Green SF C.I.42095; Light Green SF yellowish
Product Number(s): C121, C1211, C1215
CAS Number: 5141-20-8

Recommended use of the chemical and restriction on use

Laboratory use.

Company Details

ProSciTech Pty Ltd
11 Carlton Street
KIRWAN QLD 4817
Australia
(07) 4773 9444
pst@proscitech.com
proscitech.com.au

Emergency Contact Details

ProSciTech Pty Ltd
11 Carlton Street
KIRWAN QLD 4817
Australia
(07) 4773 9444
pst@proscitech.com
proscitech.com.au

2. Hazards Identification

Classification of the substance or mixture

Not a dangerous substance according to GHS.

Label Elements

Signal Words: Danger
Hazard Statement(s): Not available.
Precautionary Statement(s): Not available.

Primary route(s) of entry

Not available.

Human Health

Inhalation: Not available.
Ingestion: Not available.
Eyes: Not available.
Skin: Not available.

Environment

Not available.

3. Composition / Information on Ingredients

Name	CAS No.	Content (w/w)	Classification
Acid Green 5	5141-20-8	-	-

4. First Aid Measures

Ingestion: Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physician.
Inhalation: If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician.
Skin Contact: Wash off with soap and plenty of water. Consult a physician.
Eye Contact: Flush eyes with water as a precaution.
Other Information: Consult a physician. Show this safety data sheet to the doctor in attendance.
The most important known symptoms and effects are described in the labelling (see section 2.2) and/or in section 11.

5. Firefighting Measures

Suitable extinguishing equipment

Fire: Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
HAZCHEM: Carbon oxides, nitrogen oxides (NOx), Sulphur oxides, Sodium oxides.

Special protective equipment and precautions for fire fighters

Wear self contained breathing apparatus for fire fighting if necessary.

6. Accidental Release Measures

Personal precautions, protective equipment and emergency procedures: Use personal protective equipment. Avoid dust formation. Avoid breathing vapours, mist or gas. Avoid breathing dust.
For personal protection see section 8.
Environmental precautions: Do not let product enter drains.
Methods and materials for containment and clean up: Pick up and arrange disposal without creating dust. Sweep up and shovel. Keep in suitable, closed containers for disposal.

7. Handling and Storage

Precautions for safe handling: Avoid formation of dust and aerosols.
Provide appropriate exhaust ventilation at places where dust is formed.Normal measures for preventive fire protection.
Conditions for safe storage: Store in cool place. Keep container tightly closed in a dry and well-ventilated place.

8. Exposure Controls / Personal Protection

Exposure Standards

Engineering controls: Not available.

Personal protective equipment

Eye and face protection: Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU).
Skin protection: Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique (without touching glove's outer surface) to avoid skin contact with this product. Dispose of
contaminated gloves after use in accordance with applicable laws and good laboratory practices.
Wash and dry hands.
The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and the
standard EN 374 derived from it.
Full contact
Material: Nitrile rubber
Minimum layer thickness: 0.11 mm
Break through time: 480 min
Material tested:Dermatril® (KCL 740 / Aldrich Z677272, Size M)
Splash contact
Material: Nitrile rubber
Minimum layer thickness: 0.11 mm
Break through time: 480 min
Material tested:Dermatril® (KCL 740 / Aldrich Z677272, Size M)
data source: KCL GmbH, D-36124 Eichenzell, phone ±49 (0)6659 87300, e-mail sales@kcl.de, test method: EN374
If used in solution, or mixed with other substances, and under conditions which differ from EN 374,
contact the supplier of the CE approved gloves. This recommendation is advisory only and must be evaluated by an industrial hygienist and safety officer familiar with the specific situation of anticipated use by our customers. It should not be construed as offering an approval for any specific use
scenario.
Body protection: Choose body protection in relation to its type, to the concentration and amount of dangerous substances, and to the specific work-place., The type of protective equipment must be selected according to the concentration and amount of the dangerous substance at the specific workplace.
Respiratory protection: Respiratory protection is not required. Where protection from nuisance levels of dusts are desired, use type N95 (US) or type P1 (EN 143) dust masks. Use respirators and components tested and approved under appropriate government standards such as NIOSH (US) or CEN (EU).

9. Physical and Chemical Properties

General information

Appearance: Crystalline
Odour: Not available.
pH: Not available.
Vapour Pressure: Not available.
Density: Not available.
Boiling Point: Not available.
Melting Point: 288 °C - dec
Solubility: Not available.
Specific Gravity of Density: Not available.
Flash Point: Not available.
Flammable (Explosive) Limits: Not available.
Ignition Temperature: Not available.
Formula: C37H34N2Na2O9S3

10. Stability and Reactivity

Reactivity: No further relevant information available.
Chemical stability: Stable under recommended storage conditions.
Possibility of hazardous reactions: No further relevant information available.
Conditions to avoid: No further relevant information available.
Incompatible materials: Strong oxidising agents.

11. Toxicological Information

Acute effects: LD50 Oral - rat - > 2,000 mg/kg
Eye contact: No further relevant information available.
Skin contact: No further relevant information available.
Ingestion: No further relevant information available.
Inhalation: No further relevant information available.
Toxicity and irritation: To the best of our knowledge, the chemical, physical, and toxicological properties have not been thoroughly investigated.

12. Ecological Information

Ecotoxicity: Toxicity to fish LC50 - Oryzias latipes - 1,000 mg/l - 48 h
Persistence and degradability: No further relevant information available.
Bioaccumulative potential: No further relevant information available.
Other adverse effects: No further relevant information available.

13. Disposal Considerations

General information

Offer surplus and non-recyclable solutions to a licensed disposal company. Contact a licensed professional waste disposal service to dispose of this material. Dissolve or mix the material with a combustible solvent
and burn in a chemical incinerator equipped with an afterburner and scrubber.
Contaminated packaging
Dispose of as unused product.

14. Transport Information

ADG label required

HAZCHEM: Carbon oxides, nitrogen oxides (NOx), Sulphur oxides, Sodium oxides.
UN Number: None
Proper shipping name: Not regulated.
Transport hazard class: 0
Packing group: None.
Environmental hazard: Marine pollutant.
Special precautions for users: No information available.
Additional information: No information available.

15. Regulatory Information

Poisons Schedule Number: Not listed.
Other Information: No further relevant information available.

16. Other Information

SDS preparation date: 27 November 2024
Comments: This information is based on our present knowledge. However, this shall not constitute a guarantee for any specific product features and shall not establish a legally valid contractual relationship.