JB-4®/JB-4 Plus® Embedding Kit - Solution B

1. Identification

Product Identifiers

Product Name

JB-4/JB-4 Plus Embedding Kit - Solution B

Other Names

N,N-Dimethylaniline [Benzenamine, N,Ndimethyl]

Product Number(s)

C612, C617

CAS Number

Not available.

Recommended use of the chemical and restriction on use

Company Details

Emergency Contact Details

2. Hazards Identification

Classification of the substance or mixture

Label Elements

Signal Words

Warning

Hazard Statement(s)

• Harmful in contact with skin or if inhaled.
• Causes skin irritation.

Precautionary Statement(s)

• Avoid breathing dust/fume/gas/mist/vapours/spray.
• Wash thoroughly after handling.
• Use only outdoors or in a well-ventilated area.
• Wear protective gloves/protective clothing.

Primary route(s) of entry

Human Health

Inhalation

Remove victim to fresh air and keep at rest in a position comfortable for breathing. Call a poison centre/doctor if you feel unwell.

Ingestion

• Call a POISON CENTER/doctor if you feel unwell.
• Specific treatment (see on this label).
• Rinse mouth.

Eyes

Not available.

Skin

• Wash with plenty of water.
• If skin irritation or rash occurs: Get medical advice/attention.
• Take off contaminated clothing and wash it before reuse.'
• Wash contaminated clothing before reuse.

Environment

3. Composition / Information on Ingredients

4. First Aid Measures

Ingestion

Call for a doctor immediately.

Inhalation

Supply fresh air. If required, provide artificial respiration. Keep patient warm. Consult doctor if symptoms persist. In case of unconsciousness place patient stably in side position for transportation.

Skin Contact

Immediately wash with water and soap and rinse thoroughly.

Eye Contact

Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor.

Other Information

Symptoms of poisoning may even occur after several hours; therefore medical observation for at least 48 hours after the accident.

5. Firefighting Measures

Suitable extinguishing equipment

Fire

CO₂, powder or water spray. Fight larger fires with water spray or alcohol resistant foam.

HAZCHEM

No further relevant information available.

Special protective equipment and precautions for fire fighters

6. Accidental Release Measures

Personal precautions, protective equipment and emergency procedures

Not required.

Environmental precautions

• Dilute with plenty of water.
• Do not allow to enter sewers/surface or ground water.

Methods and materials for containment and clean up

• Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust). Dispose contaminated material as waste according to item 13.
• Ensure adequate ventilation

7. Handling and Storage

Precautions for safe handling

• Ensure good ventilation/exhaustion at the workplace.
• Prevent formation of aerosols

Conditions for safe storage

Keep container tightly sealed.

8. Exposure Controls / Personal Protection

Exposure Standards

Engineering controls

Store in a well-ventilated place. Keep cool.

Personal protective equipment

Eye and face protection

Tightly sealed goggles.

Skin protection

• Protective gloves
• The glove material has to be impermeable and resistant to the product/ the substance/ the preparation.
• Due to missing tests no recommendation to the glove material can be given for the product/ the preparation/ the chemical mixture.
• Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation.
• Material of gloves
• The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance of the glove material can not be calculated in advance and has therefore to be checked prior to the application.
• Penetration time of glove material
• The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.

Body protection

• Keep away from foodstuffs, beverages and feed.
• Immediately remove all soiled and contaminated clothing.
• Wash hands before breaks and at the end of work.
• Avoid contact with the eyes and skin.

Respiratory protection

In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer exposure use self-contained respiratory protective device.

9. Physical and Chemical Properties

General information

Appearance

Colourless liquid

Odour

Characteristic

pH

Not determined.

Vapour Pressure

Not determined

Density

Not determined

Boiling Point

Undetermined

Melting Point

Undetermined

Solubility

Fully miscible with water.

Specific Gravity of Density

Not determined.

Flash Point

>93.3 °C

Flammable (Explosive) Limits

Not determined.

Ignition Temperature

Not determined.

Formula

Not available.

10. Stability and Reactivity

Reactivity

No further relevant information available.

Chemical stability

No decomposition if used according to specifications.

Possibility of hazardous reactions

No dangerous reactions known.

Conditions to avoid

No further relevant information available.

Incompatible materials

No further relevant information available.

11. Toxicological Information

Acute effects

• The product shows the following dangers according to the calculation method of the General EU Classification Guidelines for Preparations as issued in the latest version:
• Harmful
• Irritant

Eye contact

Irritating effect.

Skin contact

Irritant to skin and mucous membranes.

Ingestion

No further relevant information available.

Inhalation

Sensitisation possible through skin contact.

Toxicity and irritation

• LD/LC50 values relevant for classification:
• 121-69-7 N,N-dimethylaniline
• Oral LD50 1410 mg/kg (rat)
• Dermal LD50 1770 mg/kg (rabbit)
• 75-07-0 acetaldehyde
• Oral LD50 661 mg/kg (rat)
• Inhalative LC50/4 h 37 mg/l (rat)
• 75-21-8 ethylene oxide
• Oral LD50 72 mg/kg (rat)
• Inhalative LC50/4 h 2671 mg/l (rat)
• 50-00-0 formaldehyde
• Oral LD50 >200 mg/kg (rat)
• 123-91-1 1,4-dioxane
• Oral LD50 5700 mg/kg (mouse)
• Dermal LD50 7600 mg/kg (rabbit)
• Inhalative LC50/4 h 46 mg/l (rat)

12. Ecological Information

Ecotoxicity

No further relevant information available.

Persistence and degradability

No further relevant information available.

Bioaccumulative potential

No further relevant information available.

Other adverse effects

• Water hazard class 3: extremely hazardous for water.
• Do not allow product to reach ground water, water course or sewage system, even in small quantities.
• Danger to drinking water if even extremely small quantities leak into the ground.

13. Disposal Considerations

General information

14. Transport Information

ADG label required

HAZCHEM

No further relevant information available.

UN Number

Not regulated.

Proper shipping name

Not regulated.

Transport hazard class

Not regulated

Packing group

Not regulated

Environmental hazard

Not applicable.

Special precautions for users

Not applicable.

Additional information

No information available.

15. Regulatory Information

Poisons Schedule Number

• ethylene oxide S7
• formaldehyde S2, S6, S

Other Information

• GHS07
• Signal word Warning
• Hazard-de

16. Other Information

SDS preparation date

24 February 2026

Comments

This information is based on our present knowledge. However, this shall not constitute a guarantee for any specific product features and shall not establish a legally valid contractual relationship.