In-Situ Mounting Medium

1. Identification

Product Identifiers

Product Name

In-Situ Mounting Medium

Other Names

Not available.

Product Number(s)

17988-30, EMS17988-30

CAS Number

Not available.

Recommended use of the chemical and restriction on use

Company Details

Emergency Contact Details

2. Hazards Identification

Classification of the substance or mixture

Label Elements

Signal Words

Warning

Hazard Statement(s)

Flammable liquid and vapour.

Precautionary Statement(s)

• Keep away from heat/sparks/open flames/hot surfaces. No smoking.
• Keep container tightly closed.
• Ground/bond container and receiving equipment.
• Use explosion-proof electrical/ventilating/lighting equipment.
• Use only non-sparking tools.
• Take precautionary measures against static discharge.
• Wear protective gloves/protective clothing/eye protection/face protection.

Primary route(s) of entry

Human Health

Inhalation

Not available.

Ingestion

Not available.

Eyes

Not available.

Skin

(Or hair) Remove/take off immediately all contaminated clothing. Rinse skin with water/shower.

Environment

3. Composition / Information on Ingredients

No information provided.

4. First Aid Measures

Ingestion

If symptoms persist consult doctor.

Inhalation

Supply fresh air; consult doctor in case of complaints.

Skin Contact

Generally the product does not irritate the skin.

Eye Contact

Rinse opened eye for several minutes under running water.

Other Information

No further relevant information available.

5. Firefighting Measures

Suitable extinguishing equipment

Fire

CO₂, sand, extinguishing powder. Do not use water.

HAZCHEM

For safety reasons unsuitable extinguishing agents: Water with full jet.

Special protective equipment and precautions for fire fighters

6. Accidental Release Measures

Personal precautions, protective equipment and emergency procedures

Wear protective equipment. Keep unprotected persons away.

Environmental precautions

Do not allow to enter sewers/surface of ground water.

Methods and materials for containment and clean up

• Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).
• Do not flush with water or aqueous cleansing agents.

7. Handling and Storage

Precautions for safe handling

• No special precautions are necessary if used correctly.
• Keep ignition sources away - Do not smoke.
• Protect against electrostatic charges.

Conditions for safe storage

Keep container tightly sealed.

8. Exposure Controls / Personal Protection

Exposure Standards

Engineering controls

Wash hands before breaks and at the end of work.

Personal protective equipment

Eye and face protection

Tightly sealed goggles.

Skin protection

Protective gloves. The glove material has to be impermeable and resistant to the product/the substance/the preparation. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation. The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.

Body protection

Not available.

Respiratory protection

Not required.

9. Physical and Chemical Properties

General information

Appearance

Colourless liquid

Odour

Pungent

pH

Not determined

Vapour Pressure

23hPa

Density

2.1g/cm³

Boiling Point

118°C

Melting Point

Undetermined

Solubility

Not miscible or difficult to mix.

Specific Gravity of Density

Not available.

Flash Point

39°C

Flammable (Explosive) Limits

Not determined

Ignition Temperature

Not available.

Formula

Not available.

10. Stability and Reactivity

Reactivity

No further relevant information available.

Chemical stability

No decomposition if used according to specifications.

Possibility of hazardous reactions

No dangerous reactions known.

Conditions to avoid

No further relevant information available.

Incompatible materials

No further relevant information available.

11. Toxicological Information

Acute effects

Not available.

Eye contact

No irritating effect.

Skin contact

No irritant effect.

Ingestion

Not available.

Inhalation

No sensitising effects known.

Toxicity and irritation

Not available.

12. Ecological Information

Ecotoxicity

No further relevant information available.

Persistence and degradability

No further relevant information available.

Bioaccumulative potential

No further relevant information available.

Other adverse effects

• Water hazard class 1: slightly hazardous for water.
• Do not allow undiluted product or large quantities of it to reach ground water, water course or sewage system.

13. Disposal Considerations

General information

14. Transport Information

ADG label required

HAZCHEM

For safety reasons unsuitable extinguishing agents: Water with full jet.

UN Number

UN1993

Proper shipping name

1993FLAMMABLE LIQUID, N.O.S. (ACETIC ACID, GLACIAL)

Transport hazard class

Class 3 Flammable liquids.

Packing group

III

Environmental hazard

Not applicable.

Special precautions for users

• Warning: Flammable liquids.
• Hazard identification number (Kemler code): 30
• EMS Number: F-E,S-E
• Segregation groups: Acids
• Stowage Category: A

Additional information

• Limited quantities (LQ) 5L
• Excepted quantities (EQ) Code: E1
• maximum net quantity per inner packaging: 30mL
• Maximum net quantity per outer packaging: 1000mL
• Transport category: 3
• Tunnel restriction code: D/E

15. Regulatory Information

Poisons Schedule Number

64-19-7 Acetic Acid Glacial S2, S5, S6.

Other Information

A Chemical Safety Assessment has not been carried out.

16. Other Information

SDS preparation date

24 February 2026

Comments

This information is based on our present knowledge. However, this shall not constitute a guarantee for any specific product features and shall not establish a legally valid contractual relationship.