Safety Data Sheets / Hydrogen Peroxide 30% Solution
Safety Data Sheet
Hydrogen Peroxide 30% Solution
1. Identification
Product Identifiers
- Product Name
- Hydrogen Peroxide 30% Solution
- Other Names
- Hydrogen peroxide Solution, 30% (Perhydrol TM) for analysis EMSURE ISO
- Product Number(s)
- 16790, 16792, 26212-02, EMS16790, EMS16792, EMS26212-02
- CAS Number
- 7722-84-1
Recommended use of the chemical and restriction on use
Laboratory chemicals.
Company Details
ProSciTech Pty Ltd
11 Carlton Street
KIRWAN QLD 4817
Australia
(07) 4773 9444
pst@proscitech.com
proscitech.com.au
11 Carlton Street
KIRWAN QLD 4817
Australia
(07) 4773 9444
pst@proscitech.com
proscitech.com.au
Emergency Contact Details
ProSciTech Pty Ltd
11 Carlton Street
KIRWAN QLD 4817
Australia
(07) 4773 9444
pst@proscitech.com
proscitech.com.au
11 Carlton Street
KIRWAN QLD 4817
Australia
(07) 4773 9444
pst@proscitech.com
proscitech.com.au
2. Hazards Identification
Classification of the substance or mixture
- GHS03 Flame over circle
- Ox. Liq. 2 H272 May intensify fire; oxidiser.
- GHS05 Corrosion.
- Skin Corr. 1A H314 Causes severe skin burns and eye damage.
- Eye Dam. 1 H318 Causes serious eye damage.
- GHS07
- Acute Tox. 4 H302 Harmful if swallowed.
- Acute Tox. 4 H332 Harmful if inhaled.
- STOT SE 3 H335 May cause respiratory irritation.
Label Elements



- Signal Words
- None
- Hazard Statement(s)
- May intensify fire; oxidiser.
- Harmful if swallowed.
- Harmful if inhaled.
- Causes severe skin burns and eye damage.
- May cause respiratory irritation.
- Precautionary Statement(s)
- Keep away from heat.
- Keep/store away from clothing/combustible materials.
- Take any precaution to avoid mixing with combustibles.
- Do not breathe dusts or mists.
- Wash thoroughly after handling.
- Do not eat, drink or smoke when using this product.
- Use only outdoors or in a well-ventilated area.
- Wear protective gloves/protective clothing/eye protection/face protection.
Primary route(s) of entry
Not available.
Human Health
- Inhalation
- Remove victim to fresh air and keep at rest in a position comfortable for breathing.
- Ingestion
- Call a POISON CENTER/doctor if you feel unwell. Rinse mouth. Do NOT induce vomiting.
- Eyes
- Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a POISON CENTER/doctor.
- Skin
- (or hair) Remove/take off immediately all contaminated clothing. Rinse skin with water/shower. Wash contaminated clothing before reuse.
Environment
- In case of fire: Use CO₂, powder or water spray for extinction.
- Store in a well-ventilated place. Keep container tightly closed.
- Store locked up.
- Dispose of contents/container in accordance with local/regional/national/international regulations.
3. Composition / Information on Ingredients
| Name | CAS No. | Content (w/w) | Classification |
|---|---|---|---|
| Not Available | Not Available |
4. First Aid Measures
- Ingestion
- Call for a doctor immediately.
- Drink plenty of water and provide fresh air. Call for a doctor immediately.
- Inhalation
- Supply fresh air. If required, provide artificial respiration. Keep patient warm. Consult doctor if symptoms persist.
- In case of unconsciousness place patient stably in side position for transportation.
- Skin Contact
- Immediately wash with water and soap and rinse thoroughly.
- Eye Contact
- Rinse opened eye for several minutes under running water. Then consult a doctor.
- Other Information
- Immediately remove any clothing soiled by the product.
- Symptoms of poisoning may even occur after several hours; therefore medical observation for at least 48 hours after the accident.
5. Firefighting Measures
Suitable extinguishing equipment
- Fire
- Use fire extinguishing methods suitable to surrounding conditions.
- HAZCHEM
- No further relevant information available.
Special protective equipment and precautions for fire fighters
Mouth respiratory protective device. Prevent skin contact by keep a safe distance or by wearing suitable protective clothing. Prevent fire extinguishing water from contaminating surface water or the ground water system.
6. Accidental Release Measures
- Personal precautions, protective equipment and emergency procedures
- Wear protective equipment. Keep unprotected persons away.
- Environmental precautions
- Dilute with plenty of water.
- Do not allow to enter sewers/surface or ground water.
- Methods and materials for containment and clean up
- Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).
- Use neutralising agent.
- Dispose contaminated material as waste according to item 13.
- Ensure adequate ventilation.
7. Handling and Storage
- Precautions for safe handling
- Ensure good ventilation/exhaustion at the workplace.
- Protect from heat.
- Conditions for safe storage
- Store in a cool location.
- Keep container tightly sealed.
- Store in cool, dry conditions in well sealed receptacles.
8. Exposure Controls / Personal Protection
Exposure Standards
| Material | TWA ppm | TWA mg/m³ | STEL ppm | STEL mg/m³ |
|---|---|---|---|---|
| Hydrogen Peroxide Solution, 30% | 1ppm | 1.4mg/m³ | - |
- Engineering controls
- Keep away from foodstuffs, beverages and feed.
- Immediately remove all soiled and contaminated clothing.
- Wash hands before breaks and at the end of work.
- Avoid contact with the eyes and skin.
Personal protective equipment
- Eye and face protection
- Tightly sealed goggles.
- Skin protection
- Protective gloves. The glove material has to be impermeable and resistant to the product/the substance/the preparation. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation. The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.
- Body protection
- Protective clothing.
- Respiratory protection
- In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer exposure use self-contained respiratory protective device.
9. Physical and Chemical Properties
General information
- Appearance
- Clear liquid.
- Odour
- Odourless
- pH
- Not determined
- Vapour Pressure
- 31hPa
- Density
- 1.1g/cm³
- Boiling Point
- 108 °C
- Melting Point
- -33 °C
- Solubility
- Fully miscible
- Specific Gravity of Density
- Not available
- Flash Point
- Not applicable.
- Flammable (Explosive) Limits
- Not determined
- Ignition Temperature
- Not determined
- Formula
- Not available.
10. Stability and Reactivity
- Reactivity
- No further relevant information available.
- Chemical stability
- No decomposition if used according to specifications.
- Possibility of hazardous reactions
- No dangerous reactions known.
- Conditions to avoid
- No further relevant information available.
- Incompatible materials
- No further relevant information available.
11. Toxicological Information
- Acute effects
- No further relevant information available.
- Eye contact
- Strong caustic effect.
- Skin contact
- Strong caustic effect on skin and mucous membranes.
- Ingestion
- Swallowing will lead to a strong caustic effect on mouth and throat and to the danger of perforation of oesophagus and stomach.
- Inhalation
- No sensitising effects known.
- Toxicity and irritation
- No further relevant information available.
12. Ecological Information
- Ecotoxicity
- No further relevant information available.
- Persistence and degradability
- No further relevant information available.
- Bioaccumulative potential
- No further relevant information available.
- Other adverse effects
- Water hazard class 1: slightly hazardous for water.
- Do not allow undiluted product or large quantities of it to reach ground water, water course or sewage system.
- Must not reach sewage water or drainage ditch undiluted or unneutralised.
13. Disposal Considerations
General information
- Must not be disposed together with household garbage. Do not allow product to reach sewage system.
- Disposal must be made according to official regulations.
- Recommended cleansing agents: Water, if necessary together with cleansing agents.
14. Transport Information
ADG label required


- HAZCHEM
- No further relevant information available.
- UN Number
- UN2014
- Proper shipping name
- 2014HYDROGEN PEROXIDE, AQUEOUS SOLUTION
- Transport hazard class
- Class 5.1 Oxidising substances
- Label: 5.1±8
- Packing group
- II
- Environmental hazard
- Not applicable.
- Special precautions for users
- Warning: Oxidising substances.
- Hazard identification number (Kemler code): 559
- EMS Number: F-H,S-Q
- Segregation groups: Peroxides
- Stowage Category: D
- Stowage Code: SW1 Protected from sources of heat.
- Segregation code:
- SG16 Stow "separated from" class 4.1
- SG59 Stow "separated from" SGG14-permanganates.
- SG72 See 7.2.6.3.2.
- Additional information
- ADG
- Limited quantities (LQ) 1L
- Excepted quantities (EQ) Code: E2
- Maximum net quantity per inner packaging: 30mL
- Maximum net quantity per outer packaging: 500mL
- Transport category: 2
- Tunnel restriction code: E
- IMDG
- Limited quantities (LQ) 0
- Excepted quantities (EQ) Code: E0
- Not permitted as Excepted Quantity
15. Regulatory Information
- Poisons Schedule Number
- S5, S6, S10
- Other Information
- A Chemical Safety Assessment has not been carried out.
16. Other Information
- SDS preparation date
- 24 February 2026
- Comments
- This information is based on our present knowledge. However, this shall not constitute a guarantee for any specific product features and shall not establish a legally valid contractual relationship.
