Safety Data Sheets / Histocryl Resin Kit - Resin
Safety Data Sheet
Histocryl Resin Kit - Resin
1. Identification
Product Identifiers
- Product Name
- Histocryl Resin Kit - Resin
- Other Names
- N/A
- Product Number(s)
- 14390, C032
- CAS Number
- -
Recommended use of the chemical and restriction on use
Laboratory chemicals.
Company Details
ProSciTech Pty Ltd
11 Carlton Street
KIRWAN QLD 4817
Australia
(07) 4773 9444
pst@proscitech.com
proscitech.com.au
11 Carlton Street
KIRWAN QLD 4817
Australia
(07) 4773 9444
pst@proscitech.com
proscitech.com.au
Emergency Contact Details
ProSciTech Pty Ltd
11 Carlton Street
KIRWAN QLD 4817
Australia
(07) 4773 9444
pst@proscitech.com
proscitech.com.au
11 Carlton Street
KIRWAN QLD 4817
Australia
(07) 4773 9444
pst@proscitech.com
proscitech.com.au
2. Hazards Identification
Classification of the substance or mixture
- GHS07
- Skin Irrit. 2 H315 Causes skin irritation.
- Eye Irrit. 2A H319 Causes serious eye irritation.
Label Elements

- Signal Words
- Warning
- Hazard Statement(s)
- H315 Causes skin irritation.
- H319 Causes serious eye irritation.
- Precautionary Statement(s)
- Wash thoroughly after handling.
- Wear protective gloves/eye protection/face protection.
Primary route(s) of entry
No further relevant information available.
Human Health
- Inhalation
- Not available.
- Ingestion
- Not available.
- Eyes
- Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention.
- Skin
- Wash with plenty of water. If skin irritation occurs: Get medical advice/attention. Take off contaminated clothing and wash it before reuse.
Environment
No further relevant information available.
3. Composition / Information on Ingredients
| Name | CAS No. | Content (w/w) | Classification |
|---|---|---|---|
| methacrylic acid, monoester with propane-1,2-diol | 27813-02-1 | >50-≤100% | Not Available |
4. First Aid Measures
- Ingestion
- If symptoms persist consult doctor.
- Inhalation
- Supply fresh air. If required, provide artificial respiration. Keep patient warm. Consult doctor if symptoms persist. In case of unconsciousness place patient stably in side position for transportation.
- Skin Contact
- Immediately wash with water and soap and rinse thoroughly.
- Eye Contact
- Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor.
- Other Information
- Symptoms of poisoning may even occur after several hours; therefore medical observation for at least 48 hours after the accident.
5. Firefighting Measures
Suitable extinguishing equipment
- Fire
- Use fire extinguishing methods suitable to surrounding conditions.
- Large Fire
- Use fire extinguishing methods suitable to surrounding conditions.
- HAZCHEM
- Not available.
Special protective equipment and precautions for fire fighters
Mouth respiratory protective device.
6. Accidental Release Measures
- Personal precautions, protective equipment and emergency procedures
- Not required.
- Environmental precautions
- Dilute with plenty of water.
- Do not allow to enter sewers/surface or ground water.
- Methods and materials for containment and clean up
- Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust). Dispose contaminated material as waste according to item 13. Ensure adequate ventilation.
7. Handling and Storage
- Precautions for safe handling
- Ensure good ventilation/exhaustion at the workplace. Prevent formation of aerosols.
- Conditions for safe storage
- Keep container tightly sealed.
8. Exposure Controls / Personal Protection
Exposure Standards
- Engineering controls
- Wash hands before breaks and at the end of work. Immediately remove all soiled and contaminated clothing. Keep away from foodstuffs, beverages and feed. Avoid contact with the eyes and skin.
Personal protective equipment
- Eye and face protection
- Tightly sealed goggles.
- Skin protection
- Protective gloves. The glove material has to be impermeable and resistant to the product/ the substance/ the preparation. Due to missing tests no recommendation to the glove material can be given for the product/ the preparation/ the chemical mixture. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation. The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.
- Body protection
- Protective clothing.
- Respiratory protection
- In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer exposure useself-contained respiratory protective device.
9. Physical and Chemical Properties
General information
- Appearance
- Liquid, colourless
- Odour
- Characteristic
- pH
- 6.9
- Vapour Pressure
- Not determined.
- Density
- 1 g/cm³
- Boiling Point
- 142°C
- Melting Point
- -7°C
- Solubility
- Fully miscible
- Specific Gravity of Density
- Not determined.
- Flash Point
- 105°C
- Flammable (Explosive) Limits
- Not applicable.
- Ignition Temperature
- Not applicable.
- Formula
- Not available.
10. Stability and Reactivity
- Reactivity
- No further relevant information available.
- Chemical stability
- No decomposition if used according to specifications.
- Possibility of hazardous reactions
- No dangerous reactions known.
- Conditions to avoid
- No further relevant information available.
- Incompatible materials
- No further relevant information available.
11. Toxicological Information
- Acute effects
- No further relevant information available.
- Eye contact
- Irritating effect.
- Skin contact
- Irritant to skin and mucous membranes.
- Ingestion
- No further relevant information available.
- Inhalation
- No sensitising effects known.
- Toxicity and irritation
- The product shows the following dangers according to the calculation method of the General EU Classification. Guidelines for Preparations as issued in the latest version:
- Irritant.
12. Ecological Information
- Ecotoxicity
- No further relevant information available.
- Persistence and degradability
- No further relevant information available.
- Bioaccumulative potential
- No further relevant information available.
- Other adverse effects
- Water hazard class 1: slightly hazardous for water. Do not allow undiluted product or large quantities of it to reach ground water, water course or sewage system.
13. Disposal Considerations
General information
- Must not be disposed together with household garbage. Do not allow product to reach sewage system. Disposal must be made according to official regulations.
- Recommended cleansing agents: Water, if necessary together with cleansing agents.
14. Transport Information
ADG label required
- HAZCHEM
- Not available.
- UN Number
- Not regulated
- Proper shipping name
- Not regulated
- Transport hazard class
- Not regulated
- Packing group
- Not regulated
- Environmental hazard
- Not applicable.
- Special precautions for users
- Not applicable.
- Additional information
- No further relevant information available.
15. Regulatory Information
- Poisons Schedule Number
- Not regulated.
- Other Information
- No further information available.
16. Other Information
- SDS preparation date
- 24 February 2026
- Comments
- This information is based on our present knowledge. However, this shall not constitute a guarantee for any specific product features and shall not establish a legally valid contractual relationship.
