Safety Data Sheets / Histocryl Resin Kit - Accelerator
Safety Data Sheet
Histocryl Resin Kit - Accelerator
1. Identification
Product Identifiers
- Product Name
- Histocryl Resin Kit - Accelerator
- Other Names
- Not available.
- Product Number(s)
- 14390A, C032
- CAS Number
- Not available
Recommended use of the chemical and restriction on use
Laboratory chemicals
Company Details
ProSciTech Pty Ltd
11 Carlton Street
KIRWAN QLD 4817
Australia
(07) 4773 9444
pst@proscitech.com
proscitech.com.au
11 Carlton Street
KIRWAN QLD 4817
Australia
(07) 4773 9444
pst@proscitech.com
proscitech.com.au
Emergency Contact Details
ProSciTech Pty Ltd
11 Carlton Street
KIRWAN QLD 4817
Australia
(07) 4773 9444
pst@proscitech.com
proscitech.com.au
11 Carlton Street
KIRWAN QLD 4817
Australia
(07) 4773 9444
pst@proscitech.com
proscitech.com.au
2. Hazards Identification
Classification of the substance or mixture
- GHS06 Skull and crossbones
- Acute Tox. 3 H301 Toxic if swallowed.
- Acute Tox. 3 H311 Toxic in contact with skin.
- Acute Tox. 3 H331 Toxic if inhaled.
- GHS08 Health hazard
- Carc. 2 H351 Suspected of causing cancer.
- STOT RE 2 H373 May cause damage to organs through prolonged or repeated exposure.
- Plam. Liq. 4 H227 Combustible liquid.
Label Elements


- Signal Words
- None
- Hazard Statement(s)
- Hazard-determining components of labelling:
- N,N-dimethyl-p-toluidine
- Combustible liquid.
- Toxic if swallowed.
- Toxic in contact with skin.
- Toxic if inhaled.
- Suspected of causing cancer.
- May cause damage to organs through prolonged or repeated exposure.
- Precautionary Statement(s)
- Obtain special instruction before use.
- Do not handle until all safety precautions have been read and understood.
- Keep away from flames and hot surfaces. - No smoking.
- Do not breathe dust/fume/gas/mist/vapours/spray.
- Wash thoroughly after handling.
- Do not eat, drink or smoke when using this product.
- Use only outdoors or in a well-ventilated area.
- Wear protective gloves/protective clothing/eye protection/face protection.
Primary route(s) of entry
Not available.
Human Health
- Inhalation
- Remove victim to fresh air and keep at rest in a position comfortable for breathing. Call a POISON CENTER/doctor if you feel unwell.
- Ingestion
- Immediately call a POISON CENTER/doctor. Rinse mouth.
- Eyes
- Get medical attention if you feel unwell.
- Skin
- Wash with plenty of water. Take off immediately all contaminated clothing and wash it before reuse.
Environment
- In case of fire: Use CO₂, powder or water spray for extinction.
- Store in a well-ventilated place. Keep container tightly closed.
- Store in a well-ventilated place. Keep cool.
- Store locked up.
- Dispose of contents/container in accordance with local/regional/national/international regulations.
3. Composition / Information on Ingredients
| Name | CAS No. | Content (w/w) | Classification |
|---|---|---|---|
| N,N-dimethyl-p-toluidine | 99-97-8 | >50-≤100% | Not Available |
4. First Aid Measures
- Ingestion
- do not induce vomiting; call for medical help immediately.
- Inhalation
- Supply fresh air or oxygen; call for doctor.
- In case of unconsciousness place patient stably in side position for transportation.
- Skin Contact
- Immediately wash with water and soap and rinse thoroughly.
- Eye Contact
- Rinse opened eye for several minutes under running water. Then consult a doctor.
- Other Information
- Immediately remove any clothing soiled by the product.
- Remove breathing equipment only after contaminated clothing have been completely removed.
- In case of irregular breathing or respiratory arrest provide artificial respiration.
5. Firefighting Measures
Suitable extinguishing equipment
- Fire
- CO₂, powder or water spray. Fight larger fires with water spray or alcohol resistant foam.
- HAZCHEM
- No further relevant information available.
Special protective equipment and precautions for fire fighters
Mouth respiratory protective device.
6. Accidental Release Measures
- Personal precautions, protective equipment and emergency procedures
- Not required.
- Environmental precautions
- Inform respective authorities in case of seepage into water course or sewage system.
- Do not allow to enter sewers/surface or ground water.
- Methods and materials for containment and clean up
- Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).
- Dispose contaminated material as waste according to item 13.
- Ensure adequate ventilation.
7. Handling and Storage
- Precautions for safe handling
- Ensure good ventilation/exhaustion at the workplace.
- Open and handle receptacle with care.
- Prevent formation of aerosols.
- Keep respiratory protective device available.
- Conditions for safe storage
- Keep container tightly sealed.
8. Exposure Controls / Personal Protection
Exposure Standards
- Engineering controls
- Keep away from foodstuffs, beverages and feed.
- Immediately remove all soiled and contaminated clothing.
- Wash hands before breaks and at the end of work.
- Store protective clothing separately.
- Avoid contact with the eyes and skin.
Personal protective equipment
- Eye and face protection
- Goggles recommended during refilling.
- Skin protection
- Protective gloves. The glove material has to be impermeable and resistant to the product/the substance/the preparation. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation. The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.
- Body protection
- Protective clothing.
- Respiratory protection
- In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer exposure use self-contained respiratory protective device.
9. Physical and Chemical Properties
General information
- Appearance
- Clear liquid
- Odour
- Characteristic
- pH
- Not determined
- Vapour Pressure
- Not determined
- Density
- 0.94 g/cm³
- Boiling Point
- 215°C
- Melting Point
- Undetermined
- Solubility
- Not miscible or difficult to mix.
- Specific Gravity of Density
- Not available.
- Flash Point
- 76°C
- Flammable (Explosive) Limits
- Not determined
- Ignition Temperature
- Not determined
- Formula
- not available.
10. Stability and Reactivity
- Reactivity
- No further relevant information available.
- Chemical stability
- No decomposition if used according to specifications.
- Possibility of hazardous reactions
- No dangerous reactions known.
- Conditions to avoid
- No further relevant information available.
- Incompatible materials
- No further relevant information available.
11. Toxicological Information
- Acute effects
- Not available.
- Eye contact
- No irritating effect.
- Skin contact
- No irritant effect.
- Ingestion
- No sensitising effects known.
- Inhalation
- No sensitising effects known.
- Toxicity and irritation
- Toxic
12. Ecological Information
- Ecotoxicity
- Harmful to fish.
- Persistence and degradability
- No further relevant information available.
- Bioaccumulative potential
- No further relevant information available.
- Other adverse effects
- Water hazard class 1: slightly hazardous for water.
- Do not allow undiluted product or large quantities of it to reach ground water, water course or sewage system.
- Harmful to aquatic organisms.
13. Disposal Considerations
General information
- Must not be disposed together with household garbage. Do not allow product to reach sewage system.
- Disposal must be made according to official regulations.
14. Transport Information
ADG label required

- HAZCHEM
- No further relevant information available.
- UN Number
- UN2810
- Proper shipping name
- 2810 TOXIC LIQUID, ORGANIC, N.O.S. (N,N-dimethyl-p-toluidine)
- Transport hazard class
- Class 6.1 Toxic substances.
- Label 6.1
- Packing group
- III
- Environmental hazard
- Not applicable.
- Special precautions for users
- Warning: Toxic substances.
- Hazard identification number (Kemler code): 60
- EMS Number: F-A,S-A
- Stowage Category: A
- Stowage Code: SW2 Clear of living quarters.
- Additional information
- Limited quantities (LQ) 5L
- Excepted quantities (EQ) Code: E1
- Maximum net quantity per inner packaging: 30mL
- Maximum net quantity per outer packaging: 1000ml
15. Regulatory Information
- Poisons Schedule Number
- No further relevant information is available.
- Other Information
- A Chemical Safety Assessment has not been carried out.
16. Other Information
- SDS preparation date
- 24 February 2026
- Comments
- This information is based on our present knowledge. However, this shall not constitute a guarantee for any specific product features and shall not establish a legally valid contractual relationship.
