Hard-Plus Resin-812 Kit

1. Identification

Product Identifiers

Product Name

Hard-Plus Resin-812 Kit

Other Names

Hard-Plus Resin-812

Product Number(s)

14115, 14115-A, 14115-H, 14115-R, EMS14115

CAS Number

Not available.

Recommended use of the chemical and restriction on use

Company Details

Emergency Contact Details

2. Hazards Identification

Classification of the substance or mixture

Label Elements

Signal Words

Warning

Hazard Statement(s)

• Hazard-determining components of labelling: EMBEDDING RESIN
• Causes skin irritation.
• Causes serious eye irritation.
• May cause an allergic skin reaction.

Precautionary Statement(s)

• Avoid breathing dust/fume/gas/mist/vapours/spray.
• Wash thoroughly after handling.
• Contaminated work clothing must not be allowed out of the workplace.
• Wear protective gloves/eye protection/face protection.

Primary route(s) of entry

Human Health

Inhalation

Not further relevant information available.

Ingestion

No further relevant information available.

Eyes

rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.

Skin

Wash with plenty of water. Take off contaminated clothing and wash it before reuse. If skin irritation or rash occurs: Get medical advice/attention.

Environment

3. Composition / Information on Ingredients

No information provided.

4. First Aid Measures

Ingestion

If symptoms persist consult doctor.

Inhalation

• Supply fresh air and to be sure call for a doctor.
• In case of unconsciousness place patient stably in side position for transportation.

Skin Contact

Immediately wash with water and soap and rinse thoroughly.

Eye Contact

Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor.

Other Information

No further relevant information available.

5. Firefighting Measures

Suitable extinguishing equipment

Fire

Use fire fighting measures that suit the environment.

HAZCHEM

No further relevant information available.

Special protective equipment and precautions for fire fighters

6. Accidental Release Measures

Personal precautions, protective equipment and emergency procedures

Not required.

Environmental precautions

• Inform respective authorities in case of seepage into water course or sewage system.
• Do not allow to enter sewers/surface or ground water.

Methods and materials for containment and clean up

• Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).
• Ensure adequate ventilation.

7. Handling and Storage

Precautions for safe handling

• Ensure good ventilation/exhaustion at the workplace.
• Prevent formation of aerosols.

Conditions for safe storage

Keep receptacle tightly sealed.

8. Exposure Controls / Personal Protection

Exposure Standards

Engineering controls

• Keep away from foodstuffs, beverages and feed.
• Immediately remove all soiled and contaminated clothing.
• Wash hands before breaks and at the end of work.
• Avoid contact with the eyes and skin.

Personal protective equipment

Eye and face protection

Tightly sealed goggles

Skin protection

Protective gloves. The glove material has to be impermeable and resistant to the product/the substance/the preparation. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation. The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.

Body protection

Protective clothing.

Respiratory protection

In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer exposure use respiratory protective device that is independent of circulating air.

9. Physical and Chemical Properties

General information

Appearance

Light yellow liquid.

Odour

Aromatic

pH

Not determined.

Vapour Pressure

Not determined

Density

0.98g/cm³

Boiling Point

180°C

Melting Point

Undetermined

Solubility

Not miscible or difficult to mix.

Specific Gravity of Density

Not available.

Flash Point

150°C

Flammable (Explosive) Limits

Not determined

Ignition Temperature

Not determined

Formula

Not available

10. Stability and Reactivity

Reactivity

No further relevant information available.

Chemical stability

No decomposition if used according to specifications.

Possibility of hazardous reactions

No dangerous reactions known.

Conditions to avoid

No further relevant information available.

Incompatible materials

No further relevant information available.

11. Toxicological Information

Acute effects

No further relevant information available.

Eye contact

Irritating effect.

Skin contact

Irritant to skin and mucous membranes. Sensitization possible through skin contact.

Ingestion

No further relevant information available.

Inhalation

No further relevant information available.

Toxicity and irritation

No further relevant information available.

12. Ecological Information

Ecotoxicity

Toxic for fish.

Persistence and degradability

No further relevant information available.

Bioaccumulative potential

No further relevant information available.

Other adverse effects

• Water hazard class 2: Hazardous for water.
• Do not allow product to reach ground water, water course or sewage system.
• Danger to drinking water if even small quantities leak into the ground.
• Also poisonous for fish and plankton in water bodies.
• Toxic for aquatic organisms.

13. Disposal Considerations

General information

14. Transport Information

ADG label required

HAZCHEM

No further relevant information available.

UN Number

UN3082

Proper shipping name

3082 ENVIRONMENTALLY HAZARDOUS SUBSTANE, LIQUID, N.O.S. (EMBEDDING RESIN) MARINE POLLUTANT.

Transport hazard class

Class 9 Miscellaneous dangerous substances and articles.

Packing group

III

Environmental hazard

Symbol (fish and tree)

Special precautions for users

• Warning: Miscellaneous dangerous substances and articles.
• Hazard identification number (Kemler code): 90
• EMS Number: F-A,S-F
• Stowage Category: A

Additional information

• Limited quantities (LQ) 5L
• Excepted quantities (EQ) Code: E1
• Maximum net quantity per inner packaging: 30mL
• Maximum net quantity per outer packaging: 1000ml

15. Regulatory Information

Poisons Schedule Number

Substance is not listed.

Other Information

A Chemical Safety Assessment has not been carried out.

16. Other Information

SDS preparation date

24 February 2026

Comments

This information is based on our present knowledge. However, this shall not constitute a guarantee for any specific product features and shall not establish a legally valid contractual relationship.