Safety Data Sheets / Glutaraldehyde Solution, 0.1M Phosphate Buffered, pH 7.4 - 2%
Safety Data Sheet
Glutaraldehyde Solution, 0.1M Phosphate Buffered, pH 7.4 - 2%
1. Identification
Product Identifiers
- Product Name
- Glutaraldehyde Solution, 0.1M Phosphate Buffered - 2%
- Other Names
- Nil
- Product Number(s)
- 16536-05, 16536-05-2MLCR, 16536-05-SP, 16536-10, 16536-SPECIAL, C16536-05, C16536-10
- CAS Number
- 111-30-8
Recommended use of the chemical and restriction on use
For research and laboratory use only.
Company Details
ProSciTech Pty Ltd
11 Carlton Street
KIRWAN QLD 4817
Australia
(07) 4773 9444
pst@proscitech.com
proscitech.com.au
11 Carlton Street
KIRWAN QLD 4817
Australia
(07) 4773 9444
pst@proscitech.com
proscitech.com.au
Emergency Contact Details
ProSciTech Pty Ltd
11 Carlton Street
KIRWAN QLD 4817
Australia
(07) 4773 9444
pst@proscitech.com
proscitech.com.au
11 Carlton Street
KIRWAN QLD 4817
Australia
(07) 4773 9444
pst@proscitech.com
proscitech.com.au
2. Hazards Identification
Classification of the substance or mixture
- GHS08 Health hazard
- Sensitization - respiratory 1 H334 May cause allergy or asthma symptoms or breathing difficulties if inhaled.
- GHS07
- Skin irritation 2 H315 Causes skin irritation.
- Eye irritation 2A H319 Causes serious eye irritation.
- Sensitization - skin 1 H317 May cause an allergic skin reaction.
- Specific target organ toxicity (single exposure) 3 H335 May cause respiratory irritation.
Label Elements


- Signal Words
- None
- Hazard Statement(s)
- Causes skin irritation.
- Causes serious eye irritation.
- May cause allergy or asthma symptoms or breathing difficulties if inhaled.
- May cause an allergic skin reaction.
- May cause respiratory irritation.
- Precautionary Statement(s)
- Avoid breathing dust/fume/gas/mist/vapours/spray
- Wash thoroughly after handling.
- Use only outdoors or in a well-ventilated area.
- Contaminated work clothing must not be allowed out of the workplace.
- Wear protective gloves / eye protection / face protection.
- [In case of inadequate ventilation] wear respiratory protection.
Primary route(s) of entry
No information available.
Human Health
- Inhalation
- Remove person to fresh air and keep comfortable for breathing.
- If experiencing respiratory symptoms: Call a poison center/doctor.
- Ingestion
- No information available.
- Eyes
- Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do.
- Continue rinsing.
- Call a poison center/doctor if you feel unwell.
- If eye irritation persists: Get medical advice/attention.
- Skin
- Wash with plenty of water.
- Take off contaminated clothing and wash it before reuse.
- If skin irritation or rash occurs: Get medical advice/attention.
Environment
Dispose of contents/container to an approved waste disposal plant.
3. Composition / Information on Ingredients
| Name | CAS No. | Content (w/w) | Classification |
|---|---|---|---|
| Glutaraldehyde | 111-30-8 | 1-5% | Flam. Liq. 4; Acute Tox., Oral 3; Acute Tox., Inhal. 2; Skin Corr. 1B; Eye Dam. 1; Resp. Sens. 1; Skin Sens. 1B; STOT SE 3; Aquatic Acute 1; H227, H301, H314, H317, H318, H330, H334, H335, H400. |
4. First Aid Measures
- Ingestion
- If symptoms persist consult doctor.
- Inhalation
- Supply fresh air and to be sure call for a doctor.
- In case of unconsciousness place patient stably in side position for transportation.
- Skin Contact
- Immediately wash with water and soap and rinse thoroughly.
- Eye Contact
- Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor.
- Other Information
- Symptoms of poisoning may even occur after several hours; therefore medical observation for at least 48 hours after the accident.
5. Firefighting Measures
Suitable extinguishing equipment
- Fire
- Use fire fighting measures that suit the environment. Water spray, alcohol-resistant foam, dry chemical, and carbon dioxide extinguishers are suitable.
- HAZCHEM
- No further relevant information available.
Special protective equipment and precautions for fire fighters
Mouth respiratory protective device.
6. Accidental Release Measures
- Personal precautions, protective equipment and emergency procedures
- Provide suitable ventilation. Use any necessary personal protective equipment. Avoid contact with skin and eyes, and avoid creation and inhalation of vapour or dust. Keep all unnecessary personnel away.
- Environmental precautions
- Prevent product from entering public sewers and waterways.
- Methods and materials for containment and clean up
- Use inert absorbent material to absorb any spilled or leaked product and dispose of as hazardous waste. Keep in suitable, closed containers for disposal.
7. Handling and Storage
- Precautions for safe handling
- Ensure good ventilation/exhaustion at the workplace.
- Prevent formation of aerosols.
- Conditions for safe storage
- Requirements to be met by storerooms and receptacles: No special requirements.
- Information about storage in one common storage facility: Not required.
- Further information about storage conditions: Keep receptacle tightly sealed.
- Specific end use(s) No further relevant information available.
8. Exposure Controls / Personal Protection
Exposure Standards
| Material | TWA ppm | TWA mg/m³ | STEL ppm | STEL mg/m³ |
|---|---|---|---|---|
| Glutaraldehyde | 0.2 ppm | 0.8 mg/m³ | - |
- Engineering controls
- Follow good industrial hygiene and safety practices when handling product.
Personal protective equipment
- Eye and face protection
- Use only government-approved safety glasses with side-shields.
- Skin protection
- Use gloves when handling product. Inspect gloves before use to ensure suitability for use. Remove without exposing skin to the gloves outer surface. Discard used gloves according to all pertinent laws and/or current good practices (cGXP). Wash hands with soap and water.
- Body protection
- Wear appropriate clothing. Ensure clothing is in good condition, with no holes or tears. When selecting clothing, consider the concentration and amount of substance to be handled.
- Respiratory protection
- In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer exposure use respiratory protective device that is independent of circulating air
9. Physical and Chemical Properties
General information
- Appearance
- Colourless to light yellow liquid
- Odour
- Characteristic
- pH
- 7.4
- Vapour Pressure
- Not available
- Density
- Not available
- Boiling Point
- 100 °C (212 °F)
- Melting Point
- 0 °C (32 °F)
- Solubility
- Fully miscible
- Specific Gravity of Density
- Not available
- Flash Point
- Not available
- Flammable (Explosive) Limits
- Not available
- Ignition Temperature
- Not available
- Formula
- C-H-O₂, Structural (condensed) formula: OHC-(CH₂)?-CHO
10. Stability and Reactivity
- Reactivity
- No special reactivity is known.
- Chemical stability
- Product is stable when stored and used as recommended.
- Possibility of hazardous reactions
- Carbon oxides may be released under fire conditions.
- Conditions to avoid
- No further relevant information available
- Incompatible materials
- No further relevant information available
11. Toxicological Information
- Acute effects
- Sensitization possible through inhalation.
- Sensitization possible through skin contact
- Eye contact
- Irritanting effect.
- Skin contact
- Irritant to skin and mucous membranes.
- Ingestion
- No information available
- Inhalation
- No information available
- Toxicity and irritation
- Carcinogenic categories
- IARC (International Agency for Research on Cancer): None of the ingredients is listed.
- NTP (National Toxicology Program): None of the ingredients is listed.
- OSHA-Ca (Occupational Safety Health Administration): None of the ingredients is listed.
12. Ecological Information
- Ecotoxicity
- No further relevant information available.
- Persistence and degradability
- No further relevant information available.
- Bioaccumulative potential
- No further relevant information available.
- Other adverse effects
- Harmful to fish
- Additional ecological information:
- General notes:
- Water hazard class 2 (Self-assessment): hazardous for water
- Do not allow product to reach ground water, water course or sewage system.
- Danger to drinking water if even small quantities leak into the ground.
- Harmful to aquatic organisms
13. Disposal Considerations
General information
- Waste treatment methods
- Recommendation:
- Must not be disposed of together with household garbage. Do not allow product to reach sewage system.
- Uncleaned packagings:
- Recommendation: Disposal must be made according to official regulations.
- Recommended cleansing agent: Water, if necessary with cleansing agents.
14. Transport Information
ADG label required
- HAZCHEM
- No further relevant information available.
- UN Number
- Void
- Proper shipping name
- Void
- Transport hazard class
- Void
- Packing group
- Void
- Environmental hazard
- Not applicable.
- Special precautions for users
- Not applicable.
- Additional information
- Not applicable.
15. Regulatory Information
- Other Information
- Sara
- Section 355 (extremely hazardous substances): None of the ingredients is listed.
- Section 313 (Specific toxic chemical listings): None of the ingredients is listed.
- TSCA (Toxic Substances Control Act):
- 7732-18-5 Deionised Water, Reagent Grade A.C.S. ACTIVE
- 111-30-8 Glutaraldehyde ACTIVE
- Hazardous Air Pollutants
- None of the ingredients is listed.
- Proposition 65
- Chemicals known to cause cancer: None of the ingredients is listed.
- Chemicals known to cause reproductive toxicity for females: None of the ingredients is listed.
- Chemicals known to cause reproductive toxicity for males: None of the ingredients is listed.
- Chemicals known to cause developmental toxicity: None of the ingredients is listed.
- Carcinogenic categories
- EPA (Environmental Protection Agency): None of the ingredients is listed.
- TLV (Threshold Limit Value): 111-30-8 Glutaraldehyde A4
- NIOSH-Ca (National Institute for Occupational Safety and Health): None of the ingredients is listed.
16. Other Information
- SDS preparation date
- 24 February 2026
- Comments
- Abbreviations and acronyms:
- ADR: Accord relatif au transport international des marchandises dangereuses par route (European Agreement Concerning the International
- Carriage of Dangerous Goods by Road)
- IMDG: International Maritime Code for Dangerous Goods
- DOT: US Department of Transportation
- IATA: International Air Transport Association
- EINECS: European Inventory of Existing Commercial Chemical Substances
- ELINCS: European List of Notified Chemical Substances
- CAS: Chemical Abstracts Service (division of the American Chemical Society)
- NFPA: National Fire Protection Association (USA)
- HMIS: Hazardous Materials Identification System (USA)
- VOC: Volatile Organic Compounds (USA, EU)
- LC50: Lethal concentration, 50 percent
- LD50: Lethal dose, 50 percent
- PBT: Persistent, Bioaccumulative and Toxic
- vPvB: very Persistent and very Bioaccumulative
- NIOSH: National Institute for Occupational Safety
- OSHA: Occupational Safety Health
- TLV: Threshold Limit Value
- PEL: Permissible Exposure Limit
- REL: Recommended Exposure Limit
- Skin irritation 2: Skin corrosion/irritation - Category 2
- Eye irritation 2A: Serious eye damage/eye irritation - Category 2A
- Sensitization - respiratory 1: Respiratory sensitisation - Category 1
- Sensitization - skin 1: Skin sensitisation - Category 1
- Specific target organ toxicity (single exposure) 3: Specific target organ toxicity (single exposure) - Category 3
- References
- EMS SDS Glutaraldehyde 2% Fixative in 0.1M Phosphate Buffer, pH 7.4 01/02/2025 https://www.emsdiasum.com/docs/technical/msds/16536-05.pdf
- Bioworld SDS Glutaraldehyde (2%) Fixative in 0.1M Phosphate Buffer, pH 7.4 29/10/2025 https://www.bio-world.com/site/accounts/masterfiles/MSDS/MS-30400005.pdf
