Safety Data Sheets / Glutaraldehyde 5% Aqueous Solution, EM Grade
Safety Data Sheet
Glutaraldehyde 5% Aqueous Solution, EM Grade
1. Identification
Product Identifiers
- Product Name
- Glutaraldehyde 5% Aqueous Solution, EM Grade
- Other Names
- Not available
- Product Number(s)
- 16539-15, 16539-20, 16539-25, EMS16539-15, EMS16539-20, EMS16539-25
- CAS Number
- 111-30-8
Recommended use of the chemical and restriction on use
Laboratory chemicals
Company Details
ProSciTech Pty Ltd
11 Carlton Street
KIRWAN QLD 4817
Australia
(07) 4773 9444
pst@proscitech.com
proscitech.com.au
11 Carlton Street
KIRWAN QLD 4817
Australia
(07) 4773 9444
pst@proscitech.com
proscitech.com.au
Emergency Contact Details
ProSciTech Pty Ltd
11 Carlton Street
KIRWAN QLD 4817
Australia
(07) 4773 9444
pst@proscitech.com
proscitech.com.au
11 Carlton Street
KIRWAN QLD 4817
Australia
(07) 4773 9444
pst@proscitech.com
proscitech.com.au
2. Hazards Identification
Classification of the substance or mixture
- GHS06 Skull and crossbones
- Acute Tox. 3 H331 Toxic if inhaled.
- GHS08 Health hazard
- Resp. Sens. 1 H334 May cause allergy or asthma symptoms or breathing difficulties if inhaled.
- GHS05 Corrosion
- Skin Corr. 1B H314 Causes severe skin burns and eye damage.
- Eye Dam. 1 H318 Causes serious eye damage.
- GHS07
- Skin Sens. 1 H317 May cause an allergic skin reaction.
- STOT SE 3 H335 May cause respiratory irritation.
Label Elements




- Signal Words
- None
- Hazard Statement(s)
- Glutaraldehyde
- Toxic if inhaled.
- Causes severe skin burns and eye damage.
- May cause allergy or asthma symptoms or breathing difficulties if inhaled.
- May cause an allergic skin reaction.
- May cause respiratory irritation.
- Precautionary Statement(s)
- Do not breathe dusts or mists.
- Wash thoroughly after handling.
- Use only outdoors or in a well-ventilated area.
- Contaminated work clothing should not be allowed out of the workplace.
- Wear protective gloves/protective clothing/eye protection/face protection.
- Wear respiratory protection.
Primary route(s) of entry
Not available.
Human Health
- Inhalation
- Remove victim to fresh air and keep at rest in a position comfortable for breathing. If experiencing respiratory symptoms: Call a POISON CENTRE/doctor.
- Ingestion
- Rinse mouth. Do NOT induce vomiting.
- Eyes
- Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
- Skin
- (or hair) Remove/take off immediately all contaminated clothing. Rinse skin with water/shower. If skin irritation or rash occurs: Get medical advice/attention. Wash contaminated clothing before reuse.
Environment
- Store in a well-ventilated place. Keep container tightly closed.
- Store locked up.
- Dispose of contents/container in accordance with local/regional/national/international regulations.
3. Composition / Information on Ingredients
| Name | CAS No. | Content (w/w) | Classification |
|---|---|---|---|
| Glutaraldehyde | 111-30-8 | >2.5-≤10% | Mixture |
4. First Aid Measures
- Ingestion
- Call for a doctor immediately.
- Drink plenty of water and provide fresh air. Call for a doctor immediately.
- Inhalation
- Supply fresh air or oxygen; call for a doctor.
- In case of unconsciousness place patient stably in side position for transportation.
- Skin Contact
- Immediately wash with water and soap and rinse thoroughly.
- Eye Contact
- Rinse opened eye for several minutes under running water. Then consult a doctor.
- Other Information
- Immediately remove any clothing soiled by the product.
- Symptoms of poisoning may even occur after several hours; therefore medical observation for at least 48 hours after the accident.
- Remove beathing equipment only after contaminated clothing have been completely removed.
- In case of irregular breathing or respiratory arrest provide artificial respiration.
5. Firefighting Measures
Suitable extinguishing equipment
- Fire
- Use fire extinguishing methods suitable to surrounding conditions.
- HAZCHEM
- No further relevant information available.
Special protective equipment and precautions for fire fighters
Mouth respiratory protective device.
6. Accidental Release Measures
- Personal precautions, protective equipment and emergency procedures
- Wear protective equipment. Keep unprotected persons away.
- Environmental precautions
- Inform respective authorities in case of seepage into water course or sewage system.
- Dilute with plenty of water.
- Do not allow to enter sewers/surface or ground water.
- Methods and materials for containment and clean up
- Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).
- Use neutralising agent.
- Dispose of contaminated material as waste according to item 13.
- Ensure adequate ventilation.
7. Handling and Storage
- Precautions for safe handling
- Ensure good ventilation/exhaustion at the workplace.
- Open and handle receptacle with care.
- Prevent formation of aerosols.
- Keep respiratory protective device available.
- Conditions for safe storage
- Keep container tightly sealed.
8. Exposure Controls / Personal Protection
Exposure Standards
| Material | TWA ppm | TWA mg/m³ | STEL ppm | STEL mg/m³ |
|---|---|---|---|---|
| Glutaraldehyde | 0.1ppm | 0.41mg/m³ | - |
- Engineering controls
- Keep away from foodstuffs, beverages and feed.
- Immediately remove all soiled and contaminated clothing.
- Wash hands before breaks and at the end of work.
- Store protective clothing separately.
- Avoid contact with the eyes.
- Avoid contact with the eyes and skin.
Personal protective equipment
- Eye and face protection
- Tightly sealed goggles.
- Skin protection
- Wear protective gloves. The glove material has to be impermeable and resistant to the product/the substance/the preparation. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation. The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.
- Body protection
- Not available.
- Respiratory protection
- In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer exposure use self-contained respiratory protective device.
9. Physical and Chemical Properties
General information
- Appearance
- Colourless liquid
- Odour
- Strong
- pH
- Not determined
- Vapour Pressure
- 23hPa at 20°C
- Density
- 1.05g/cm³ at 20°C
- Boiling Point
- 101°C
- Melting Point
- Undetermined
- Solubility
- Fully miscible
- Specific Gravity of Density
- Not available
- Flash Point
- Not applicable.
- Flammable (Explosive) Limits
- Not determined
- Ignition Temperature
- Product is not selfigniting
- Formula
- Organic solvents: 0.3%
- Water: 94.8%
- VOC (EC): 0.25%
10. Stability and Reactivity
- Reactivity
- No further relevant information available
- Chemical stability
- No decomposition if used according to specifications.
- Possibility of hazardous reactions
- No dangerous reactions known.
- Conditions to avoid
- No further relevant information available.
- Incompatible materials
- No further relevant information available.
11. Toxicological Information
- Acute effects
- 111-30-8 Glutaraldehyde
- Oral LD50 134mg/kg (rat)
- Dermal LD50 2560mg/kg (rabbit)
- Eye contact
- Strong caustic effect.
- Strong irritant with the danger of severe eye injury.
- Skin contact
- Strong caustic effect on skin and mucous membranes. Sensitisation possible through skin contact
- Ingestion
- Swallowing will lead to a strong caustic effect on mouth and throat and to the danger of perforation of oesophagus and stomach.
- Inhalation
- Sensitisation possible through inhalation.
- Toxicity and irritation
- Toxic
- Harmful
- Corrosive
- Irritant
12. Ecological Information
- Ecotoxicity
- No further relevant information available.
- Persistence and degradability
- No further relevant information available.
- Bioaccumulative potential
- No further relevant information available.
- Other adverse effects
- Toxic for fish
- Harmful to fish
- Water hazard class 3: extremely hazardous for water.
- Do not allow product to reach ground water, water course or sewage system, even in small quantities.
- Must not reach sewage water or drainage ditch undiluted or unneutralised.
- Danger to drinking water if even extremely small quantities leak into the ground.
- Also poisonous for fish and plankton in water bodies.
- Toxic for aquatic organisms.
- Harmful to aquatic organisms.
13. Disposal Considerations
General information
- Must not be disposed together with household garbage. Do not allow product to reach sewage system. Disposal must be made according to official regulations.
- Recommended cleansing agents: Water, if necessary together with cleansing agents.
14. Transport Information
ADG label required

- HAZCHEM
- No further relevant information available.
- UN Number
- UN3265
- Proper shipping name
- CORROSIVE LIQUID, ACIDIC, ORGANIC, N.O.S (Glutaraldehyde)
- Transport hazard class
- Class 8 Corrosive substances.
- Packing group
- II
- Environmental hazard
- Not applicable.
- Special precautions for users
- Warning: Corrosive substances.
- Hazard identification number (Kemler code): 80
- EMS number: F-A,S-B
- Segregation groups: Acids
- Stowage category: B
- Stowage Code: SW2 Clear of living quarters.
- Additional information
- Limited Quantities (LQ) 1L
- Excepted quantities (EQ) Code: E2
- Maximum new quantity per inner packaging: 30mL
- Maximum net quantity per outer packaging: 500mL
- Transport category: 2
- Tunnel restriction code: E
15. Regulatory Information
- Poisons Schedule Number
- 111-30-8 Glutaraldehyde S2, S5, S6
- 67-56-1 Methyl Alcohol S5, S6
- Other Information
- A Chemical Safety Assessment has not been carried out.
16. Other Information
- SDS preparation date
- 27 November 2024
- Comments
- This information is based on our present knowledge. However, this shall not constitute a guarantee for any specific product features and shall not establish a legally valid contractual relationship.
