Safety Data Sheets / Formaldehyde (Paraformaldehyde) 1% Aqueous Solution, EM Grade
Safety Data Sheet
Formaldehyde (Paraformaldehyde) 1% Aqueous Solution, EM Grade
1. Identification
Product Identifiers
- Product Name
- Formaldehyde (Paraformaldehyde) 1% Aqueous Solution, EM Grade
- Product Number(s)
- 15953-10, 15953-15, C0040
- CAS Number
- 7732-18-5
Recommended use of the chemical and restriction on use
Laboratory use. Laboratory chemicals
Company Details
ProSciTech Pty Ltd
11 Carlton Street
KIRWAN QLD 4817
Australia
(07) 4773 9444
pst@proscitech.com
proscitech.com.au
11 Carlton Street
KIRWAN QLD 4817
Australia
(07) 4773 9444
pst@proscitech.com
proscitech.com.au
Emergency Contact Details
ProSciTech Pty Ltd
11 Carlton Street
KIRWAN QLD 4817
Australia
(07) 4773 9444
pst@proscitech.com
proscitech.com.au
11 Carlton Street
KIRWAN QLD 4817
Australia
(07) 4773 9444
pst@proscitech.com
proscitech.com.au
2. Hazards Identification
Classification of the substance or mixture
- GHS08 Health hazard
- Muta. 2 H341 Suspected of causing genetic defects.
- Carc. 1B H350 May cause cancer
- GHS07
- Skin Sens. 1 H317 May cause an allergic skin reaction
Label Elements


- Signal Words
- None
- Hazard Statement(s)
- May cause an allergic skin reaction.
- Suspected of causing genetic defects.
- May cause cancer.
- Precautionary Statement(s)
- Obtain special instructions before use.
- Do not handle until all safety precautions have been read and understood.
- Avoid breathing dust/fume/gas/mist/vapours/spray
- Contaminated work clothing must not be allowed out of the workplace.
- Wear protective gloves/protective clothing/eye protection/face protection.
- If on skin: Wash with plenty of water.
- IF exposed or concerned: Get medical advice/attention.
- Specific treatment (see on this label).
- If skin irritation or rash occurs: Get medical advice/attention.
- Wash contaminated clothing before reuse.
- Store locked up.
- Dispose of contents/container in accordance with local/regional/national/international regulations.
Primary route(s) of entry
Symptoms of poisoning may even occur after several hours; therefore medical observation for at least 48 hours after the accident.
Human Health
- Inhalation
- Supply fresh air and to be sure call for a doctor.
- In case of unconsciousness place patient stably in side position for transportation.
- Ingestion
- If symptoms persist consult doctor.
- Eyes
- Rinse opened eye for several minutes under running water.
- Skin
- Immediately wash with water and soap and rinse thoroughly.
3. Composition / Information on Ingredients
| Name | CAS No. | Content (w/w) | Classification |
|---|---|---|---|
| formaldehyde | 50-00-0 | ≤2.5% | Not Available |
4. First Aid Measures
- Ingestion
- If symptoms persist consult doctor.
- Inhalation
- Supply fresh air and to be sure call for a doctor.
- In case of unconsciousness place patient stably in side position for transportation.
- Skin Contact
- : Immediately wash with water and soap and rinse thoroughly
- Eye Contact
- Rinse opened eye for several minutes under running water.
5. Firefighting Measures
Suitable extinguishing equipment
- Fire
- Use fire fighting measures that suit the environment
- HAZCHEM
- No further relevant information available
Special protective equipment and precautions for fire fighters
Mouth respiratory protective device
6. Accidental Release Measures
- Personal precautions, protective equipment and emergency procedures
- Not required.
- Environmental precautions
- Dilute with plenty of water.
- Do not allow to enter sewers/ surface or ground water
- Methods and materials for containment and clean up
- Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).
- Dispose contaminated material as waste according to item 13.
- Ensure adequate ventilation
7. Handling and Storage
- Precautions for safe handling
- Ensure good ventilation/exhaustion at the workplace.
- Open and handle receptacle with care.
- Prevent formation of aerosols.
- Keep respiratory protective device available.
- Conditions for safe storage
- Keep receptacle tightly sealed.
8. Exposure Controls / Personal Protection
Exposure Standards
| Material | TWA ppm | TWA mg/m³ | STEL ppm | STEL mg/m³ |
|---|---|---|---|---|
| 50-00-0 formaldehyde | 0.016 ppm | - | 0.3 ppm |
- Engineering controls
- Keep away from foodstuffs, beverages and feed.
- Immediately remove all soiled and contaminated clothing.
- Wash hands before breaks and at the end of work.
- Store protective clothing separately.
- Avoid contact with the skin.
- Avoid contact with the eyes and skin
Personal protective equipment
- Eye and face protection
- Tightly sealed goggles
- Skin protection
- Avoid contact with the skin.
- Avoid contact with the eyes and skin
- Body protection
- Protective gloves - The glove material has to be impermeable and resistant to the product/ the substance/ the preparation. Due to missing tests no recommendation to the glove material can be given for the product/ the preparation/ the chemical mixture.
- Respiratory protection
- In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer exposure use respiratory protective device that is independent of circulating air.
9. Physical and Chemical Properties
General information
- Appearance
- Colourless liquid
- Odour
- Like aldehyde
- pH
- Not determined
- Vapour Pressure
- Not determined
- Density
- at 20 °C (68 °F): 0.9981 g/cm³ (8.32914 lbs/gal)
- Boiling Point
- 100 °C (212 °F)
- Melting Point
- 0 °C (32 °F)
- Solubility
- Fully miscible
- Specific Gravity of Density
- Not determined
- Flash Point
- Not applicable
- Flammable (Explosive) Limits
- Not determined
- Ignition Temperature
- Not determined
- Formula
- Dynamic at 20 °C (68 °F): 0.952 mPas
- Kinematic: Not determined.
- Organic solvents: 1.0 %
- Water: 99.0 %
- VOC content: 1.00 %
- 840.1 g/l / 7.01 lb/gal
10. Stability and Reactivity
- Reactivity
- No further relevant information available
- Chemical stability
- Stable under normal conditions
- Possibility of hazardous reactions
- No dangerous reactions known
- Conditions to avoid
- No further relevant information available
- Incompatible materials
- No further relevant information available
11. Toxicological Information
- Acute effects
- LD/LC50 values that are relevant for classification:
- 50-00-0 formaldehyde
- Oral LD50 >200 mg/kg (rat)
- Eye contact
- No irritating effect
- Skin contact
- Sensitization possible through skin contact. Irritant to skin and mucous membranes.
- Ingestion
- No further relevant information available
- Inhalation
- No further relevant information available
- Toxicity and irritation
- IARC (International Agency for Research on Cancer)
- 50-00-0 formaldehyde 1
- NTP (National Toxicology Program)
- 50-00-0 formaldehyde K
- OSHA-Ca (Occupational Safety Health Administration)
- 50-00-0 formaldehyde
12. Ecological Information
- Ecotoxicity
- No further relevant information available
- Persistence and degradability
- No further relevant information available
- Bioaccumulative potential
- No further relevant information available
- Other adverse effects
- No further relevant information available
13. Disposal Considerations
General information
- Water hazard class 1 (Self-assessment): slightly hazardous for water
- Do not allow undiluted product or large quantities of it to reach ground water, water course or sewage system.
- Disposal must be made according to official regulations.
14. Transport Information
ADG label required
- HAZCHEM
- No further relevant information available
- UN Number
- Not regulated
- Proper shipping name
- No information available.
- Transport hazard class
- No information available.
- Packing group
- No information available.
- Environmental hazard
- No information available.
- Special precautions for users
- No information available.
- Additional information
- No information available.
15. Regulatory Information
- Poisons Schedule Number
- No further relevant information available.
- Other Information
- No further relevant information available.
16. Other Information
- SDS preparation date
- 26 February 2026
- Comments
- This information is based on our present knowledge. However, this shall not constitute a guarantee for any specific product features and shall not establish a legally valid contractual relationship.This Safety Data Sheet (SDS) has been prepared in compliance with the Preparation of Safety Data Sheets for Hazardous Chemicals Code of Practice February 2016. It is the user's responsibility to determine the suitability of this information for adoption of necessary safety precautions. The information published in this SDS has been compiled from the publications listed in Section 16: to the best of our ability and knowledge these publications are considered accurate. We reserve the right to revise Safety Data Sheets as new information becomes available. Copies may be made for non-profit use.
