Safety Data Sheets / Fluorescent Microparticles - Yellow, <5µm

Safety Data Sheet

Fluorescent Microparticles - Yellow, <5µm

Version 1Last reviewed 23 February 2026Catalogue: QFP-00552-2

1. Identification

Product Identifiers

Product Name: Fluorescent Microparticles - Yellow
Other Names: N/A
Product Number(s): QFP-00552-2
CAS Number: 026628-22-8

Recommended use of the chemical and restriction on use

This material is only for purpose of technical analysis and/or scientific research. The health, toxicological, & eco-toxicological hazards of this substance have not been fully investigated; therefore, this substance must be handled only by, or under close supervision of those qualified in the handling and use of potentially hazardous substances. Not for domestic or food/drug/cosmetic use.

Company Details

ProSciTech Pty Ltd
11 Carlton Street
KIRWAN QLD 4817
Australia
(07) 4773 9444
pst@proscitech.com
proscitech.com.au

Emergency Contact Details

ProSciTech Pty Ltd
11 Carlton Street
KIRWAN QLD 4817
Australia
(07) 4773 9444
pst@proscitech.com
proscitech.com.au

2. Hazards Identification

Classification of the substance or mixture

Not classified as hazardous according to Regulation (EC) 1272/2008 (CLP/GHS) or Directive 67/548/EEC as amended. Caution: This substance has not been fully tested (EC).

Label Elements

Signal Words: Warning
Hazard Statement(s): Acute Tox 2. Acute toxicity category 2
H300 Fatal if swallowed.
H310 Fatal in contact with skin.
H330 Fatal if inhaled.
Aquatic Acute 1. Hazardous to the aquatic environment, acute, category 1
H400 Very toxic to aquatic life.
Aquatic Chronic 1. Hazardous to the aquatic environment, chronic, category 1
H410 Very toxic to aquatic life with long lasting effects.
T± Very Toxic
R28 Very toxic if swallowed
R32 Contact with acids liberates very toxic gas
N. Dangerous to the environment
R50-53 Very toxic to aquatic organisms, may cause long-term adverse guide for this product.
Precautionary Statement(s): Not available.

Primary route(s) of entry

No further relevant information available.

Human Health

Inhalation: May be harmful if inhaled. May cause upper respiratory tract & mucous membrane irritation.
Ingestion: May be harmful if swallowed.
Eyes: May cause eye irritation.
Skin: May cause skin irritation.

Environment

May be harmful to the environment.

Other Hazards: No further relevant information available.

3. Composition / Information on Ingredients

Name	CAS No.	Content (w/w)	Classification
Water	7732-18-5	98.98%	Not hazardous
Polystyrene beads organic dye stained	9003-53-6	1.0%	Not hazardous
Sodium Azide	26628-22-8	0.02%	Acute Tox. 2, H300 H310 H330 Aquatic Acute 1 H400 Aquatic Chronic 1 H410

4. First Aid Measures

Ingestion: Rinse mouth with water, but do not swallow mouthwash. Do not induce vomiting. Give plenty of water to drink (ONLY IN CONSCIOUS PERSONS). Refer for medical attention.
Inhalation: Immediate fresh air & rest. Keep under observation and if breathing becomes difficult seek immediate medical attention. Resuscitate if breathing stops.
Skin Contact: Remove contaminated clothes. Rinse skin with plenty of water or shower. Refer for medical attention.
Eye Contact: First rinse with plenty of water for at least 10 minutes (remove contact lenses if easily possible), ensure lids remain open during flushing, and then seek immediate medical attention.
Other Information: No further relevant information available.

5. Firefighting Measures

Suitable extinguishing equipment

Fire: Use foam extinguishers or water spray
Large Fire: Use foam extinguishers or water spray.
HAZCHEM: Not available.

Special protective equipment and precautions for fire fighters

Wear self contained breathing apparatus with full face shield operated in positive pressure mode, MSHA/NIOSH (approved or equivalent), and full protective gear.
Forms combustible solid if allowed drying out. Emits corrosive & toxic fumes, including oxides of carbon, & nitrogen during combustion. May produce black acrid smoke if burned.

6. Accidental Release Measures

Personal precautions, protective equipment and emergency procedures: No further relevant information available.
Environmental precautions: Not available.
Methods and materials for containment and clean up: Clean up spills using an absorbent, non-combustible material and gather up placing in a clean closed container for disposal. Do not wash away into sewers.

7. Handling and Storage

Precautions for safe handling: Read the Suppliers' technical data Sheet carefully before commissioning or using the product.
Conditions for safe storage: Store unopened package at ambient temperature in a well ventilated place away from heat.

8. Exposure Controls / Personal Protection

Exposure Standards

Engineering controls: No components above the 0.1% threshold have specific workplace control parameters assigned to our knowledge.

Personal protective equipment

Eye and face protection: Safety glasses with side-shields conforming to EN 166
Skin protection: Suitable impervious gloves e.g. Nitrile or Neoprene rubber. The selected protective gloves have to conform to EN 374.
Body protection: Avoid contact of contents with skin, eyes, and clothing. Wash hands before breaks and immediately after handling the product.
Respiratory protection: If required to control exposure, use only suitable respirators and components tested and approved under appropriate government standards such as NIOSH (US) or CEN (EU). Local mechanical ventilation not required as supplied, but this is also dependent on other mobile phases and analytes used. Always use a fume cupboard if handling as the dry powder or where the liquid component may become airborne.

9. Physical and Chemical Properties

General information

Appearance: Cloudy Yellow
Odour: No information available
pH: No information available
Vapour Pressure: No information available
Density: No information available
Boiling Point: 100°C (212°F)
Melting Point: No information available
Solubility: No information available
Specific Gravity of Density: No information available
Flash Point: Not applicable
Flammable (Explosive) Limits: Not applicable
Ignition Temperature: No information available
Formula: Dilute suspension of Non-Crosslinked Polystyrene beads organic dye stained in water with 0.02% Sodium Azide as preservative.

10. Stability and Reactivity

Reactivity: No further relevant information available.
Chemical stability: Stable
Possibility of hazardous reactions: Monomer maybe formed if heated to high temperatures. May release toxic fumes including oxides of carbon and nitrogen.
Conditions to avoid: Extreme heat
Incompatible materials: Strong oxidising agents, bases

11. Toxicological Information

Acute effects: No further relevant information available.
Eye contact: No further relevant information available.
Skin contact: May cause skin irritation.
Ingestion: May be harmful if swallowed.
Inhalation: May be harmful if inhaled.
Chronic effects: No further relevant information available.
Toxicity and irritation: May be harmful if absorbed through skin.

12. Ecological Information

Ecotoxicity: To the best of our knowledge, the ecotoxicological properties of this mixture have not been fully investigated. However, the liquid may be harmful to the environment depending on the quantity and dilution involved.
Persistence and degradability: No further relevant information available.
Bioaccumulative potential: No further relevant information available.
Other adverse effects: No further relevant information available.

13. Disposal Considerations

General information

Methods of disposal must meet all local, state and national laws.

14. Transport Information

ADG label required

HAZCHEM: Not available.
UN Number: None.
Proper shipping name: Not regulated.
Transport hazard class: 0
Packing group: None.
Environmental hazard: Not regulated.
Special precautions for users: Not regulated.
Additional information: Not regulated.

15. Regulatory Information

Poisons Schedule Number: Not regulated.
Other Information: No further information available.

16. Other Information

SDS preparation date: 23 February 2026
Comments: This information is based on our present knowledge. However, this shall not constitute a guarantee for any specific product features and shall not establish a legally valid contractual relationship.