Fluka Durcupan Water Soluble Embedding Kit - Component D

1. Identification

Product Identifiers

Product Name

Fluka Durcupan Water Soluble Embedding Kit - Component D - DISCONTINUED

Other Names

Durcupan H2O Solution Component D

Product Number(s)

C665

CAS Number

84-74-2

Recommended use of the chemical and restriction on use

Company Details

Emergency Contact Details

2. Hazards Identification

Classification of the substance or mixture

Label Elements

Signal Words

None

Hazard Statement(s)

May damage fertility or the unborn child.

Precautionary Statement(s)

• Wear protective gloves/protective clothing/eye protection/face protection.
• Obtain special instructions before use.
• Do not handle until all safety precautions have been read and understood.
• IF exposed or concerned: Get medical advice/attention.
• Store locked up.
• Dispose of contents/container in accordance with local/regional/national/international regulations.

Primary route(s) of entry

Human Health

Inhalation

Not available.

Ingestion

Not available.

Eyes

Not available.

Skin

Not available.

Environment

3. Composition / Information on Ingredients

4. First Aid Measures

Ingestion

If symptoms persist consult doctor.

Inhalation

Supply fresh air; consult doctor in case of complaints.

Skin Contact

Generally the product does not irritate the skin.

Eye Contact

Rinse opened eye for several minutes under running water.

Other Information

No further relevant information available.

5. Firefighting Measures

Suitable extinguishing equipment

Fire

Use fire extinguishing methods suitable to surrounding conditions.

HAZCHEM

Not available.

Special protective equipment and precautions for fire fighters

6. Accidental Release Measures

Personal precautions, protective equipment and emergency procedures

Not required.

Environmental precautions

• Inform respective authorities in case of seepage into water course or sewage system.
• Dilute with plenty of water.
• Do not allow to enter sewers/ surface or ground water.

Methods and materials for containment and clean up

• Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).
• Dispose contaminated material as waste according to item 13.
• Ensure adequate ventilation.

7. Handling and Storage

Precautions for safe handling

• Ensure good ventilation/exhaustion at the workplace.
• Open and handle receptacle with care.
• Prevent formation of aerosols.

Conditions for safe storage

Store locked up.

8. Exposure Controls / Personal Protection

Exposure Standards

Engineering controls

Not available.

Personal protective equipment

Eye and face protection

Goggles recommended during refilling.

Skin protection

• The glove material has to be impermeable and resistant to the product/ the substance/ the preparation.
• Due to missing tests no recommendation to the glove material can be given for the product/ the preparation/ the chemical mixture.
• Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation.
• Material of gloves.
• The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer.
• Penetration time of glove material.
• The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.

Body protection

• Keep away from foodstuffs, beverages and feed.
• Immediately remove all soiled and contaminated clothing.
• Wash hands before breaks and at the end of work.
• Store protective clothing separately.

Respiratory protection

In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer exposure use self-contained respiratory protective device.

9. Physical and Chemical Properties

General information

Appearance

Colourless liquid.

Odour

Characteristic

pH

Neutral

Vapour Pressure

at 162 °C: 0.00002 hPa

Density

at 20 °C: 1.045 g/cm³

Boiling Point

340 °C

Melting Point

-35.8 °C

Solubility

• Miscibility with
• water at 20 °C: 0.1 g/l

Specific Gravity of Density

Not determined.

Flash Point

188 °C

Flammable (Explosive) Limits

• Lower: <0.1 Vol %
• Upper: 1.97 Vol %

Ignition Temperature

390 °C

Formula

Not available.

10. Stability and Reactivity

Reactivity

No further relevant information available.

Chemical stability

No decomposition if used according to specifications.

Possibility of hazardous reactions

No dangerous reactions known.

Conditions to avoid

No further relevant information available.

Incompatible materials

No further relevant information available.

11. Toxicological Information

Acute effects

No further relevant information available.

Eye contact

No irritant effect.

Skin contact

• No irritant effect.
• No sensitising effects known.

Ingestion

No further relevant information available.

Inhalation

No sensitising effects known.

Toxicity and irritation

• LD/LC50 values relevant for classification:
• 84-74-2 dibutyl phthalate
• Oral LD50 8000 mg/kg (rat)
• Dermal LD50 20000 mg/kg (rabbit

12. Ecological Information

Ecotoxicity

Very toxic for fish.

Persistence and degradability

No further relevant information available.

Bioaccumulative potential

No further relevant information available.

Other adverse effects

• Water hazard class 2 (German Regulation) (Assessment by list): hazardous for water.
• Do not allow product to reach ground water, water course or sewage system.
• Danger to drinking water if even small quantities leak into the ground.
• Also poisonous for fish and plankton in water bodies.
• Very toxic for aquatic organisms.

13. Disposal Considerations

General information

14. Transport Information

ADG label required

HAZCHEM

Not available.

UN Number

UN3082

Proper shipping name

• 3082 ENVIRONMENTALLY HAZARDOUS SUBSTANCE,
• LIQUID, N.O.S. (dibutyl phthalate)

Transport hazard class

9 Miscellaneous dangerous substances and articles.

Packing group

III

Environmental hazard

Symbol (fish and tree)

Special precautions for users

• Warning: Miscellaneous dangerous substances and articles.
• Danger code (Kemler): 90
• Stowage Category A

Additional information

• Transport/Additional information:
• ADG
• Limited quantities (LQ) 5L
• Excepted quantities (EQ) Code: E1
• Maximum net quantity per inner packaging: 30 ml.
• Maximum net quantity per outer packaging: 1000 ml.
• Transport category 3
• Tunnel restriction code E

15. Regulatory Information

Poisons Schedule Number

S10

Other Information

• GHS label elements
• The substance is classified and labelled according to the Globally Harmonised System (GHS).
• GHS08
• Signal word Danger
• Hazard-determining components of labelling:
• Dibutyl phthalate
• Hazard statements.
• Precautionary statements
• Wear protective gloves/protective clothing/eye protection/face protection.
• Obtain special instructions before use.
• Do not handle until all safety precautions have been read and understood.
• IF exposed or concerned: Get medical advice/attention.
• Store locked up.
• Dispose of contents/container in accordance with local/regional/national/international regulations.

16. Other Information

SDS preparation date

23 February 2026

Comments

This information is based on our present knowledge. However, this shall not constitute a guarantee for any specific product features and shall not establish a legally valid contractual relationship.