Safety Data Sheets / Ferric Chloride Hexahydrate, ACS Grade
Safety Data Sheet
Ferric Chloride Hexahydrate, ACS Grade
1. Identification
Product Identifiers
- Product Name
- Ferric Chloride Hexahydrate, ACS Grade
- Other Names
- Not available.
- Product Number(s)
- 15510, EMS15510
- CAS Number
- 10025-77-1
Recommended use of the chemical and restriction on use
Laboratory chemicals. Membrane stains
Company Details
ProSciTech Pty Ltd
11 Carlton Street
KIRWAN QLD 4817
Australia
(07) 4773 9444
pst@proscitech.com
proscitech.com.au
11 Carlton Street
KIRWAN QLD 4817
Australia
(07) 4773 9444
pst@proscitech.com
proscitech.com.au
Emergency Contact Details
ProSciTech Pty Ltd
11 Carlton Street
KIRWAN QLD 4817
Australia
(07) 4773 9444
pst@proscitech.com
proscitech.com.au
11 Carlton Street
KIRWAN QLD 4817
Australia
(07) 4773 9444
pst@proscitech.com
proscitech.com.au
2. Hazards Identification
Classification of the substance or mixture
- GHS05 Corrosion
- Corrosive to Metals 1 H290 May be corrosive to metals.
- Eye Damage 1 H318 Causes serious eye damage.
- GHS07
- Acute Toxicity - Oral 4 H302 Harmful if swallowed.
- Skin Irritation 2 H315 Causes skin irritation.
Label Elements


- Signal Words
- None
- Hazard Statement(s)
- May be corrosive to metals.
- Harmful if swallowed.
- Causes skin irritation.
- Causes serious eye damage.
- Precautionary Statement(s)
- Keep only in original container.
- Wash thoroughly after handling.
- Do not eat, drink or smoke when using this product.
- Wear protective gloves/eye protection/face protection.
Primary route(s) of entry
Not available.
Human Health
- Inhalation
- Not available.
- Ingestion
- Call a poison centre/doctor if you feel unwell. Rinse mouth
- Eyes
- Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a poison centre/doctor.
- Skin
- Wash with plenty of water. Take off contaminated clothing and wash it before reuse. If skin irritation occurs: Get medical advice/attention.
Environment
- Absorb spillage to prevent material damage.
- Store in corrosive resistant container with resistant inner liner.
- Dispose of contents/container in accordance with local/regional/national/international regulations.
3. Composition / Information on Ingredients
No information provided.
4. First Aid Measures
- Ingestion
- Immediately call a doctor.
- Inhalation
- In case of unconsciousness place patient stably in side position for transportation.
- Skin Contact
- Immediately wash with water and soap and rinse thoroughly.
- Eye Contact
- Rinse opened eye for several minutes under running water. Then consult a doctor.
- Other Information
- Symptoms of poisoning may even occur after several hours; therefore medical observation for at least 48 hours after the accident.
5. Firefighting Measures
Suitable extinguishing equipment
- Fire
- Use fire fighting measures that suit the environment.
- HAZCHEM
- No further relevant information available.
Special protective equipment and precautions for fire fighters
No special measures required.
6. Accidental Release Measures
- Personal precautions, protective equipment and emergency procedures
- Not required.
- Environmental precautions
- Do not allow to enter sewers/surface or ground water.
- Methods and materials for containment and clean up
- Dispose contaminated material as waste according to item 13.
7. Handling and Storage
- Precautions for safe handling
- No special precautions are necessary if used correctly.
- Conditions for safe storage
- No special requirements.
8. Exposure Controls / Personal Protection
Exposure Standards
- Engineering controls
- Keep away from foodstuffs, beverages and feed.
- Immediately remove all soiled and contaminated clothing.
- Wash hands before breaks and at the end of work.
- Avoid contact with the skin.
- Avoid contact with the eyes and skin.
Personal protective equipment
- Eye and face protection
- Tightly sealed goggles.
- Skin protection
- Protective gloves. The glove material has to be impermeable and resistant to the product/the substance/the preparation. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation. The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.
- Body protection
- Not available.
- Respiratory protection
- Not required.
9. Physical and Chemical Properties
General information
- Appearance
- Yellow-brown solid
- Odour
- Odourless
- pH
- Not applicable
- Vapour Pressure
- Not applicable.
- Density
- 1.82 g/cm³
- Boiling Point
- Undetermined
- Melting Point
- Undetermined
- Solubility
- Soluble
- Specific Gravity of Density
- Not available.
- Flash Point
- Not applicable
- Flammable (Explosive) Limits
- Not determined.
- Ignition Temperature
- Not determined
- Formula
- FeCl3·6H2O
10. Stability and Reactivity
- Reactivity
- No further relevant information available.
- Chemical stability
- No decomposition if used according to specifications.
- Possibility of hazardous reactions
- No dangerous reactions known.
- Conditions to avoid
- No further relevant information available.
- Incompatible materials
- No further relevant information available.
11. Toxicological Information
- Acute effects
- Not available.
- Eye contact
- Strong irritant with the danger of severe eye injury.
- Skin contact
- Irritant to skin and mucous membranes.
- Ingestion
- Not available.
- Inhalation
- No sensitizing effects known.
- Toxicity and irritation
- Not available.
12. Ecological Information
- Ecotoxicity
- No further relevant information available.
- Persistence and degradability
- No further relevant information available.
- Bioaccumulative potential
- No further relevant information available.
- Other adverse effects
- Water hazard class 1: Slightly hazardous for water.
- Do not allow undiluted product or large quantities of it to reach ground water, water course or sewage system.
- Rinse off of bigger amounts into drains or the aquatic environment may lead to decreased pH-values. A low pH-value harms aquatic organisms. In the dilution of the use-level the pH-value is considerably increased, so that after the use of the product the aqueous waste, emptied into drains, is only low water-dangerous.
13. Disposal Considerations
General information
- Must not be disposed of together with household garbage. Do not allow product to reach sewage system.
- Disposal must be made according to official regulations.
- Recommended cleansing agent: Water, if necessary with cleansing agents.
14. Transport Information
ADG label required


- HAZCHEM
- No further relevant information available.
- UN Number
- UN3260
- Proper shipping name
- 3260 CORROSIVE SOLID, ACIDIC, INORGANIC, N.O.S., MARINE POLLUTANT
- Transport hazard class
- Class 8 Corrosive substances
- Packing group
- III
- Environmental hazard
- Marine pollutant: Yes (DOT)
- Symbol (fish and tree)
- Special precautions for users
- Warning: Corrosive substances
- Hazard identification number (Kemler code): 80
- EMS Number: F-A,S-
- Stowage Category: A
- Additional information
- DOT
- Quantity limitations
- On passenger aircraft/rail: 25kg
- On Cargo aircraft only: 100kg
- Special marking with the symbol (fish and tree)
- ADR
- Excepted quantities (EQ) Code: E1
- Maximum net quantity per inner packaging: 30g
- Maximum net quantity per outer packaging: 1000g
- IMDG
- Limited quantities (LQ) 5kg
- Excepted quantities (EQ) Code: E1
- Maximum net quantity per inner packaging: 30g
- Maximum net quantity per outer packaging: 1000g
15. Regulatory Information
- Poisons Schedule Number
- Substance is not listed.
- Other Information
- A Chemical Safety Assessment has not been carried out.
16. Other Information
- SDS preparation date
- 23 February 2026
- Comments
- This information is based on our present knowledge. However, this shall not constitute a guarantee for any specific product features and shall not establish a legally valid contractual relationship.
