Safety Data Sheets / ETC Epoxy Adhesives - 597A
Safety Data Sheet
ETC Epoxy Adhesives - 597A
1. Identification
Product Identifiers
- Product Name
- ETC Epoxy Adhesives - 597A
- Other Names
- Nil
- Product Number(s)
- 50380-597, EMS50380-597
- CAS Number
- Nil
Recommended use of the chemical and restriction on use
Laboratory use, Inorganic system for bonding applications
Company Details
ProSciTech Pty Ltd
11 Carlton Street
KIRWAN QLD 4817
Australia
(07) 4773 9444
pst@proscitech.com
proscitech.com.au
11 Carlton Street
KIRWAN QLD 4817
Australia
(07) 4773 9444
pst@proscitech.com
proscitech.com.au
Emergency Contact Details
ProSciTech Pty Ltd
11 Carlton Street
KIRWAN QLD 4817
Australia
(07) 4773 9444
pst@proscitech.com
proscitech.com.au
11 Carlton Street
KIRWAN QLD 4817
Australia
(07) 4773 9444
pst@proscitech.com
proscitech.com.au
2. Hazards Identification
Classification of the substance or mixture
- GHS07
- Acute Toxicity - Oral 4 H302 Harmful if swallowed.
- Skin Irrititation 2 H315 Causes skin irritation.
- Eye Irritation 2A H319 Causes serious eye irritation.
Label Elements

- Signal Words
- Warning
- Hazard Statement(s)
- Hazard-determining components of labeling:
- Silicic acid, sodium salt
- Hazard statements
- Harmful if swallowed.
- Causes skin irritation.
- Causes serious eye irritation.
- Precautionary Statement(s)
- Wash thoroughly after handling.
- Do not eat, drink or smoke when using this product.
- Wear protective gloves / eye protection / face protection
Primary route(s) of entry
Not Stated
Human Health
- Ingestion
- Call a poison center/doctor if you feel unwell. Rinse mouth
- Eyes
- Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do.
- Continue rinsing.
- If eye irritation persists: Get medical advice/attention.
- Skin
- Wash with plenty of water.
- If skin irritation occurs: Get medical advice/attention.
- Take off contaminated clothing and wash it before reuse.
Environment
- Store in a dry place. Store in a closed container.
- Dispose of contents/container in accordance with local/regional/national/international regulations.
3. Composition / Information on Ingredients
| Name | CAS No. | Content (w/w) | Classification |
|---|---|---|---|
| Silicic acid, sodium salt | 1344-09-8 | >10-≤25% | Not Available |
4. First Aid Measures
- Ingestion
- If symptoms persist consult doctor.
- Inhalation
- In case of unconsciousness place patient stably in side position for transportation.
- Skin Contact
- Immediately wash with water and soap and rinse thoroughly.
- Eye Contact
- Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor.
- Other Information
- No further relevant information available.
5. Firefighting Measures
Suitable extinguishing equipment
- Fire
- Use fire fighting measures that suit the environment.
- HAZCHEM
- No further relevant information available.
Special protective equipment and precautions for fire fighters
No special measures required.
6. Accidental Release Measures
- Personal precautions, protective equipment and emergency procedures
- Not required.
- Environmental precautions
- Dilute with plenty of water.
- Do not allow to enter sewers/ surface or ground water.
- Methods and materials for containment and clean up
- Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).
- Ensure adequate ventilation.
- PAC-1:
- 7440-22-4 silver 0.3 mg/m³
- 1344-09-8 Silicic acid, sodium salt 5.9 mg/m³
- PAC-2:
- 7440-22-4 silver 170 mg/m³
- 1344-09-8 Silicic acid, sodium salt 65 mg/m³
- PAC-3:
- 7440-22-4 silver 990 mg/m³
- 1344-09-8 Silicic acid, sodium salt 390 mg/m³
7. Handling and Storage
- Precautions for safe handling
- Ensure good ventilation/exhaustion at the workplace.
- Prevent formation of aerosols.
- Conditions for safe storage
- Requirements to be met by storerooms and receptacles: No special requirements.
- Information about storage in one common storage facility: Not required.
- Further information about storage conditions: Keep receptacle tightly sealed.
- Specific end use(s) No further relevant information available.
8. Exposure Controls / Personal Protection
Exposure Standards
- Engineering controls
- The product does not contain any relevant quantities of materials with critical values that have to be monitored at the workplace.
- Keep away from foodstuffs, beverages and feed.
- Immediately remove all soiled and contaminated clothing.
Personal protective equipment
- Eye and face protection
- Tightly sealed goggles
- Skin protection
- Wash hands before breaks and at the end of work.
- Avoid contact with the eyes and skin.
- Body protection
- Protective gloves
- The glove material has to be impermeable and resistant to the product/ the substance/ the preparation.
- Due to missing tests no recommendation to the glove material can be given for the product/ the preparation/ the chemical mixture.
- Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation
- Material of gloves
- The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance of the glove material can not be calculated in advance and has therefore to be checked prior to the application.
- Penetration time of glove material
- The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.
- Respiratory protection
- In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer exposure use
- respiratory protective device that is independent of circulating air.
9. Physical and Chemical Properties
General information
- Appearance
- Silver Grey Pasty
- Odour
- Odourless
- pH
- 11
- Vapour Pressure
- 23 hPa (17.3 mm Hg) at 20 °C (68 °F)
- Density
- 6.774 g/cm³ (56.52903 lbs/gal) at 20 °C (68 °F)
- Boiling Point
- 100 °C (212 °F)
- Melting Point
- Undetermined
- Solubility
- Fully miscible
- Specific Gravity of Density
- Not determined.
- Flash Point
- Not applicable
- Flammable (Explosive) Limits
- Not flammable
- Ignition Temperature
- Product is not selfigniting.
10. Stability and Reactivity
- Reactivity
- No further relevant information available.
- Chemical stability
- No decomposition if used according to specifications
- Possibility of hazardous reactions
- No dangerous reactions known.
- Conditions to avoid
- No further relevant information available
- Incompatible materials
- No further relevant information available.
11. Toxicological Information
- Acute effects
- No sensitizing effects known.
- Eye contact
- Irritating effect.
- Skin contact
- Irritant to skin and mucous membranes.
- Ingestion
- No sensitizing effects known.
- Inhalation
- No sensitizing effects known.
- Toxicity and irritation
- The product shows the following dangers according to internally approved calculation methods for preparations: Irritant
- Carcinogenic categories
- IARC (International Agency for Research on Cancer)
- None of the ingredients is listed.
- NTP (National Toxicology Program)
- None of the ingredients is listed.OSHA-Ca
- (Occupational Safety Health Administration)
- None of the ingredients is listed.
12. Ecological Information
- Ecotoxicity
- No further relevant information available
- Persistence and degradability
- No further relevant information available
- Bioaccumulative potential
- No further relevant information available
- Other adverse effects
- No further relevant information available
- General notes:
- Water hazard class 1 (Self-assessment): slightly hazardous for water
- Do not allow undiluted product or large quantities of it to reach ground water, water course or sewage system.
13. Disposal Considerations
General information
- Recommendation:
- Must not be disposed of together with household garbage. Do not allow product to reach sewage system.
- Uncleaned packagings:
- Recommendation: Disposal must be made according to official regulations.
- Recommended cleansing agent: Water, if necessary with cleansing agents.
14. Transport Information
ADG label required
- HAZCHEM
- No further relevant information available.
- UN Number
- Void
- Proper shipping name
- Void
- Transport hazard class
- Void
- Packing group
- Void
- Environmental hazard
- Not applicable
- Special precautions for users
- Not applicable
- Additional information
- Not applicable
15. Regulatory Information
- Poisons Schedule Number
- Section 355 (extremely hazardous substances):
- None of the ingredients is listed.
- Section 313 (Specific toxic chemical listings):
- 7440-22-4 silver
- TSCA (Toxic Substances Control Act):
- All components have the value ACTIVE.
- Hazardous Air Pollutants
- None of the ingredients is listed.
- Proposition 65
- · Chemicals known to cause cancer:
- None of the ingredients is listed.
- Chemicals known to cause reproductive toxicity for females:
- None of the ingredients is listed.
- Chemicals known to cause reproductive toxicity for males:
- None of the ingredients is listed.
- Chemicals known to cause developmental toxicity:
- None of the ingredients is listed.
- Carcinogenic categories
- · EPA (Environmental Protection Agency)
- 7440-22-4 silver D
- TLV (Threshold Limit Value)
- None of the ingredients is listed.
- NIOSH-Ca (National Institute for Occupational Safety and Health)
- None of the ingredients is listed.
- Other Information
- The product is classified and labeled according to the Globally Harmonized System (GHS)
16. Other Information
- SDS preparation date
- 23 February 2026
- Comments
- Abbreviations and acronyms:
- ADR: Accord relatif au transport international des marchandises dangereuses par route (European Agreement Concerning the International
- Carriage of Dangerous Goods by Road)
- IMDG: International Maritime Code for Dangerous Goods
- DOT: US Department of Transportation
- IATA: International Air Transport Association
- EINECS: European Inventory of Existing Commercial Chemical Substances
- ELINCS: European List of Notified Chemical Substances
- CAS: Chemical Abstracts Service (division of the American Chemical Society)
- NFPA: National Fire Protection Association (USA)
- HMIS: Hazardous Materials Identification System (USA)
- VOC: Volatile Organic Compounds (USA, EU)
- PBT: Persistent, Bioaccumulative and Toxic
- vPvB: very Persistent and very Bioaccumulative
- NIOSH: National Institute for Occupational Safety
- OSHA: Occupational Safety Health
- TLV: Threshold Limit Value
- PEL: Permissible Exposure Limit
- REL: Recommended Exposure Limit
- Acute Toxicity - Oral 4: Acute toxicity - Category 4
- Skin Irrititation 2: Skin corrosion/irritation - Category 2
- Eye Irritation 2A: Serious eye damage/eye irritation - Category 2A
- References
- EMS SDS ETC Bond 597A 08/03/2022 https://www.emsdiasum.com/docs/technical/msds/50380-597.pdf
