Entellan New Mounting Medium

1. Identification

Product Identifiers

Product Name

Entellan New Mounting Medium

Other Names

Entellan mounting medium

Product Number(s)

EMS14800, EMS14802, IM022, IM0225

CAS Number

1330-20-7

Recommended use of the chemical and restriction on use

Company Details

Emergency Contact Details

2. Hazards Identification

Classification of the substance or mixture

Label Elements

Signal Words

None

Hazard Statement(s)

• H225: Highly flammable liquid and vapour
• H304: May be fatal if swallowed and enters airways
• H315: Causes serious skin irritation
• H336: May cause drowsiness or dizzeness
• H361: Suspected of damaging fertility or the unborn child
• H373: May cause damage to organs through prolonged or repeated exposure
• H412: Harmful to aquatic life with long term effects

Precautionary Statement(s)

• P210: Keep away from flames and hot surfaces. No smoking
• P260 Do not breathe dust/ fume/ gas/ mist/ vapours/ spray.
• P264 Wash skin thoroughly after handling.
• P273: Avoid release to the environment
• P280 Wear protective gloves/ protective clothing/ eye protection/ face protection.
• P301±P310: If swallowed: Immediately call a poison center/doctor
• P303±P361±P353: If on skin (or hair) Take off immediately all contaminated clothing. Rinse skin with water/shower
• P303±P351±P338: IF IN EYES Rinse cautiously with water for several minutes, Remove contact lenses, Continue rinsing
• P312: Call a POISON center/doctor if you feel unwell
• P405 Store locked up.
• P501: Dispose of contents/container in accordance with local regional/national/international regulations.

Primary route(s) of entry

Human Health

Inhalation

Harmful if inhaled

Ingestion

May be fatal if swallowed

Eyes

Not available.

Skin

Causes serious skin irritation

Environment

3. Composition / Information on Ingredients

4. First Aid Measures

Ingestion

After swallowing: caution if victim vomits. Risk of aspiration! Keep airways free. Pulmonary failure possible after aspiration of vomit. Call a physician immediately. Subsequently administer: activated charcoal (20 - 40 g in 10% slurry). More severe effects if alcohol is consumed

Inhalation

After inhalation: fresh air. If breathing stops: mouth-to-mouth breathing or artificial respiration. Oxygen if necessary. Immediately call in physician.

Skin Contact

After skin contact: wash off with plenty of water. Remove contaminated clothing. Consult a physician.

Eye Contact

After eye contact: rinse out with plenty of water. Call in ophthalmologist. Remove contact lenses.

Other Information

• Most important symptoms and effects, both acute and delayed irritant effects,
• Dermatitis, Dizziness, narcosis, euphoria, agitation, Gastrointestinal disturbance,
• Headache, Convulsions, drowziness
• Drying-out effect resulting in rough and chapped skin.

5. Firefighting Measures

Suitable extinguishing equipment

Fire

• Foam, Carbon dioxide (CO₂)
• ** For this substance/mixture no limitations of extinguishing agents are given.
• HAZARDS ARISING FROM MIXTURE:
• Carbon oxides
• Combustible.
• Pay attention to flashback.
• Vapors are heavier than air and may spread along floors.
• Development of hazardous combustion gases or vapours possible in the event of fire.
• Forms explosive mixtures with air at ambient temperatures.
• Remove container from danger zone and cool with water
• Prevent fire extinguishing water from contaminating surface water or the ground water system
• Do not let product enter drains.
• Risk of explosion.

Large Fire

Foam, Carbon dioxide (CO₂), Dry powder

HAZCHEM

*3Y

Special protective equipment and precautions for fire fighters

6. Accidental Release Measures

Personal precautions, protective equipment and emergency procedures

• Advice for non-emergency personnel:
• Do not breathe vapours, aerosols.
• Avoid substance contact.
• Ensure adequate ventilation.
• Keep away from heat and sources of ignition.
• Evacuate the danger area, observe emergency procedures, consult an expert.
• Advice for emergency responders: Protective equipment see section 8.

Environmental precautions

Do not let product enter drains. Risk of explosion.

Methods and materials for containment and clean up

• Cover drains
• Collect, bind, and pump off spills.
• Observe possible material restrictions (see sections 7 and 10)
• Take up with liquid-absorbent material (e.g. Chemizorb® ).
• Dispose of properly
• Clean up affected area.

7. Handling and Storage

Precautions for safe handling

• Work under hood. Do not inhale substance/mixture. Avoid generation of vapours/aerosols.
• Keep away from open flames, hot surfaces and sources of ignition.Take precautionary measures against static discharge
• Immediately change contaminated clothing. Apply preventive skin protection. Wash hands and face after working with substance.

Conditions for safe storage

• Keep container tightly closed in a dry and well-ventilated place
• Keep away from heat and sources of ignition.
• Store at ±15°C to ±25°C.

8. Exposure Controls / Personal Protection

Exposure Standards

Engineering controls

Immediately change contaminated clothing. Apply preventive skin protection. Wash hands and face after working with substance.

Personal protective equipment

Eye and face protection

Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU). Safety glasses

Skin protection

• This recommendation applies only to the product stated in the safety data sheet, supplied by us and for the designated use. When dissolving in or mixing with other substances and under conditions deviating from those stated in EN374 please contact the supplier of CE-approved gloves (e.g. KCL GmbH, D-36124 Eichenzell, Internet: www.kcl.de).
• Full contact
• Material: Viton®
• Minimum layer thickness: 0.7 mm
• Break through time: > 480 min
• Material tested:Vitoject® (KCL 890 / Aldrich Z677698, Size M)

Body protection

Flame retardant antistatic protective clothing. The chemical resistance of the protective equipment should be enquired at the respective supplier.

Respiratory protection

• Required when vapours/aerosols are generated.
• Recommended Filter type: Filter A (acc. to DIN 3181) for vapours of organic compounds The entrepeneur has to ensure that maintenance, cleaning and testing of respiratory protective devices are carried out according to the instructions of the producer. These measures have to be properly documented

9. Physical and Chemical Properties

General information

Appearance

Liquid colourless

Odour

Characteristic

pH

Not available.

Vapour Pressure

No data available

Density

No data available

Boiling Point

No data available

Melting Point

No data available

Solubility

at 20 °C practically insoluble

Specific Gravity of Density

No data available

Flash Point

8 °C

Flammable (Explosive) Limits

Not classified as explosive.

Ignition Temperature

No data available

Formula

• Viscosity, kinematic: No data available
• Viscosity, dynamic: 60 - 100 mPa.s at 20 °C

10. Stability and Reactivity

Reactivity

Vapors may form explosive mixture with air.

Chemical stability

The product is chemically stable under standard ambient conditions (room temperature) .

Possibility of hazardous reactions

• Risk of explosion with:
• fuming sulphuric acid
• Nitric acid
• silver
• perchlorates
• nitrogen dioxide
• halogen-halogen compounds
• uranium hexafluoride
• organic nitro compounds
• nonmetallic halides
• acetic acid
• Violent reactions possible with:
• Strong oxidising agents
• Strong acids
• sulphur

Conditions to avoid

Heating

Incompatible materials

Rubber, various plastics

11. Toxicological Information

Acute effects

• Systemic effects: Headache, Drowziness, Dizziness, Euphoria, Agitation, Convulsions, Narcosis
• Suspected of damaging the unborn child.
• Suspected of damaging fertility.
• Mixture may cause damage to organs through prolonged or repeated exposure. - Central
• nervous system

Eye contact

Slight irritation

Skin contact

• Mixture causes skin irritation.
• Drying-out effect resulting in rough and chapped skin. After long-term exposure to the chemical:
• Dermatitis

Ingestion

Gastrointestinal disturbance, Risk of aspiration upon vomiting.

Inhalation

• Aspiration hazard, Aspiration may cause pulmonary edema and pneumonitis.
• Mixture may cause drowsiness or dizziness.

Toxicity and irritation

• Acute toxicity
• LD50 Oral - Rat - male - 5,580 mg/kg
• (Tested according to Directive 92/69/EEC.)
• LC50 Inhalation - Rat - male and female - 4 h - 25.7 mg/l - vapour
• (OECD Test Guideline 403)
• LD50 Dermal - Rabbit - > 5,000 mg/kg
• Remarks: (ECHA)
• Skin corrosion/irritation
• Skin - Rabbit
• Result: irritating - 4 h
• Remarks: (ECHA)
• Serious eye damage/eye irritation
• Eyes - Rabbit
• Result: slight irritation
• (OECD Test Guideline 405)
• Respiratory or skin sensitization
• Maximization Test - Guinea pig
• Result: negative
• (Regulation (EC) No. 440/2008, Annex, B.6)
• Germ cell mutagenicity
• Test Type: In vitro mammalian cell gene mutation test
• Test system: Mouse lymphoma test
• Result: negative
• Test Type: Ames test
• Test system: S. typhimurium
• Result: negative
• Species: Rat - Bone marrow
• Result: negative
• Remarks: (ECHA)
• Carcinogenicity
• No data available
• Reproductive toxicity
• Suspected of damaging the unborn child.
• Specific target organ toxicity - single exposure
• May cause drowsiness or dizziness. - Central nervous system
• Specific target organ toxicity - repeated exposure
• May cause damage to organs through prolonged or repeated exposure. - Central nervous system

12. Ecological Information

Ecotoxicity

• Toxicity to fish flow-through test LC50 - Oncorhynchus kisutch (coho salmon) -
• 5.5 mg/l - 96 h
• Remarks: (ECHA)
• Toxicity to daphnia
• and other aquatic
• invertebrates
• EC50 - Ceriodaphnia dubia (water flea) - 3.78 mg/l - 48 h
• (US-EPA)
• Toxicity to bacteria static test EC50 - Bacteria - 84 mg/l - 24 h
• Remarks: (ECHA)

Persistence and degradability

No further relevant information available.

Bioaccumulative potential

No further relevant information available.

Other adverse effects

Discharge into the environment must be avoided.

13. Disposal Considerations

General information

14. Transport Information

ADG label required

HAZCHEM

*3Y

UN Number

UN1866

Proper shipping name

Resin solution

Transport hazard class

3

Packing group

PG II

Environmental hazard

No information available

Special precautions for users

• Warning: Flammable liquids
• Hazard identification number (Kemler code): 30
• EMS Number: F-E,S-E
• Stowage Category A

Additional information

• Quantity limitations On passenger aircraft/rail: 60 L
• On cargo aircraft only: 220 L
• Excepted quantities (EQ) Code: E1
• Maximum net quantity per inner packaging: 30 mL
• Maximum net quantity per outer packaging: 1000 mL
• Limited quantities (LQ) 5L
• Excepted quantities (EQ) Code: E1
• Maximum net quantity per inner packaging: 30 mL
• Maximum net quantity per outer packaging: 1000 mL

15. Regulatory Information

Poisons Schedule Number

-

Other Information

-

16. Other Information

SDS preparation date

29 November 2024

Comments

This information is based on our present knowledge. However, this shall not constitute a guarantee for any specific product features and shall not establish a legally valid contractual relationship. This Safety Data Sheet (SDS) has been prepared in compliance with the Preparation of Safety Data Sheets for Hazardous Chemicals Code of Practice February 2016. It is the user's responsibility to determine the suitability of this information for adoption of necessary safety precautions. The information published in this SDS has been compiled from the publications listed in Section 16: to the best of our ability and knowledge these publications are considered accurate. We reserve the right to revise Safety Data Sheets as new information becomes available. Copies may be made for non-profit use.