Safety Data Sheets / Durcupan ACM Epoxy - Component A
Safety Data Sheet
Durcupan ACM Epoxy - Component A
1. Identification
Product Identifiers
- Product Name
- Durcupan ACM Epoxy - Component A
- Other Names
- Durcupan ACM epoxy
- Product Number(s)
- EMS14041
- CAS Number
- 25068-38-6
Recommended use of the chemical and restriction on use
Laboratory use
Company Details
ProSciTech Pty Ltd
11 Carlton Street
KIRWAN QLD 4817
Australia
(07) 4773 9444
pst@proscitech.com
proscitech.com.au
11 Carlton Street
KIRWAN QLD 4817
Australia
(07) 4773 9444
pst@proscitech.com
proscitech.com.au
Emergency Contact Details
ProSciTech Pty Ltd
11 Carlton Street
KIRWAN QLD 4817
Australia
(07) 4773 9444
pst@proscitech.com
proscitech.com.au
11 Carlton Street
KIRWAN QLD 4817
Australia
(07) 4773 9444
pst@proscitech.com
proscitech.com.au
2. Hazards Identification
Classification of the substance or mixture
- GHS07
- Skin Irrit. 2 H315 Causes skin irritation
- Eye Irrit. 2 H319 Causes serious eye irritation
- Skin Sens. 1 H317 May cause an allergic skin reaction
Label Elements

- Signal Words
- Warning
- Hazard Statement(s)
- Causes skin irritation
- Causes serious eye irritation
- May cause an allergic skin reaction
- Precautionary Statement(s)
- Avoid breathing dust/fume/gas/mist/vapours/spray
- Wear protective gloves/protective clothing/eye protection/face protection
- Avoid release to the environment
- Wash thoroughly after handling
- Contaminated work clothing must not be allowed out of the workplace
- If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do
- Continue rinsing
- Specific treatment (see on this label)
- Take off contaminated clothing and wash before reuse
- If skin irritation or rash occurs: Get medical advice/attention
- If eye irritation persists: Get medical advice/attention
- If on skin: Wash with plenty of water
- Collect spillage
- Store in a well-ventilated place. Keep cool
- Store in a dry place. Store in a closed container
- Dispose of contents/container in accordance with local/regional/national/international regulations
Primary route(s) of entry
No further relevant information is available
Human Health
- Inhalation
- No further relevant information is available
- Ingestion
- No further relevant information is available
- Eyes
- Causes serious eye irritation
- Skin
- Causes skin irritation
Environment
Do not allow to enter sewers/ surface or ground water
3. Composition / Information on Ingredients
| Name | CAS No. | Content (w/w) | Classification |
|---|---|---|---|
| bisphenol-A-(epichlorhydrin) epoxy resin | 25068-38-6 | - | Not Available |
4. First Aid Measures
- Ingestion
- If symptoms persist, consult doctor
- Inhalation
- Supply fresh air and to be sure, call for a doctor
- Skin Contact
- Immediately wash with water and soap and rinse thoroughly
- Eye Contact
- Rinse the opened eye for several minutes under running water. If symptoms persist, consult a doctor
- Other Information
- No further relevant information is available
5. Firefighting Measures
Suitable extinguishing equipment
- Fire
- Use fire fighting measures that suit the environment
- HAZCHEM
- No further relevant information is available
Special protective equipment and precautions for fire fighters
No further relevant information is available
6. Accidental Release Measures
- Personal precautions, protective equipment and emergency procedures
- No further relevant information is available
- Environmental precautions
- : Do not allow water to enter sewers/surface or ground water
- Methods and materials for containment and clean up
- Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust). Ensure adequate ventilation
7. Handling and Storage
- Precautions for safe handling
- Ensure good ventilation/exhaustion at the workplace. Prevent formation of aerosols
- Conditions for safe storage
- Keep the receptacle tightly sealed
8. Exposure Controls / Personal Protection
Exposure Standards
- Engineering controls
- Immediately remove all soiled and contaminated clothing.
- Wash hands before breaks and at the end of work
Personal protective equipment
- Eye and face protection
- Tightly sealed goggles
- Skin protection
- Protective gloves.
- Body protection
- Protective gloves.
- Tightly sealed goggles
- Respiratory protection
- In cases of brief exposure or low pollution, use a respiratory filter device. In case of intensive or longer exposure, use respiratory protective device that is independent of circulating air
9. Physical and Chemical Properties
General information
- Appearance
- Light Yellow
- Odour
- Undistinguishable
- pH
- Not determined
- Vapour Pressure
- Not determined
- Density
- Density at 20 °C (68 °F): 1.14 g/cm² (9.513 lbs/gal)
- Boiling Point
- Not determined
- Melting Point
- Not determined
- Solubility
- Not miscible or difficult to mix
- Specific Gravity of Density
- Not determined
- Flash Point
- Not determined
- Flammable (Explosive) Limits
- Not flammable
- The product does not present an explosion hazard.
- Ignition Temperature
- Not determined
- Formula
- No further relevant information is available.
10. Stability and Reactivity
- Reactivity
- No further relevant information is available.
- Chemical stability
- No further relevant information is available.
- Possibility of hazardous reactions
- No dangerous decomposition products known
- Conditions to avoid
- No further relevant information is available.
- Incompatible materials
- No further relevant information is available.
11. Toxicological Information
- Acute effects
- No further relevant information is available.
- Eye contact
- Irritating effect
- Skin contact
- Irritant to skin and mucous membranes
- Sensitization possible through skin contact
- Ingestion
- No further relevant information is available.
- Inhalation
- No further relevant information is available.
- Toxicity and irritation
- No further relevant information is available.
12. Ecological Information
- Ecotoxicity
- Water hazard class 2 (Assessment by list): hazardous for water
- Do not allow product to reach ground water, water course or sewage system.
- Danger to drinking water if even small quantities leak into the ground
- Persistence and degradability
- No further relevant information is available
- Bioaccumulative potential
- No further relevant information is available
- Other adverse effects
- No further relevant information is available
13. Disposal Considerations
General information
- Must not be disposed of with household garbage. Do not allow the product to reach the sewage system.
- Disposal must be made according to official regulations
- Water hazard class 2 (Assessment by list): hazardous for water
- Do not allow the product to reach groundwater, a watercourse, or the sewage system.
- Danger to drinking water if even small quantities leak into the ground
14. Transport Information
ADG label required


- HAZCHEM
- No further relevant information is available
- UN Number
- UN3082
- Proper shipping name
- ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S.
- Transport hazard class
- Class 9
- Packing group
- III
- Environmental hazard
- Yes - Symbol (fish and tree)
- Special precautions for users
- Warning: Miscellaneous dangerous substances and articles
- Danger code (Kemler): 90
- EMS Number: F-A,S-F
- Additional information
- Transport/Additional information:
- Excepted quantities (EQ) Code: E1
- Maximum net quantity per inner package: 30 mL
- Maximum net quantity per outer package: 1000 mL
- Limited quantities (LQ): 5L
- UN "Model Regulation": UN3082, Environmentally hazardous substances, liquid, n.o.s.
- (reaction product: bisphenol-A-(epichlorhydrin) epoxy resin (number average molecular weight ≤ 700)), 9, III
15. Regulatory Information
- Poisons Schedule Number
- Substance is not listed
- Other Information
- Hazard statements
- Causes skin irritation.
- Causes serious eye irritation.
- May cause an allergic skin reaction.
- Precautionary statements
- Avoid breathing dust/fume/gas/mist/vapours/spray
- Wear protective gloves/protective clothing/eye protection/face protection.
- Avoid release to the environment.
- Wash thoroughly after handling.
- Contaminated work clothing must not be allowed out of the workplace.
- If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do.
- Continue rinsing.
- Specific treatment (see on this label).
- Take off contaminated clothing and wash before reuse.
- If skin irritation or rash occurs: Get medical advice/attention.
- If eye irritation persists: Get medical advice/attention.
- If on skin: Wash with plenty of water.
- Collect spillage.
- Store in a well-ventilated place. Keep cool.
- Store in a dry place. Store in a closed container.
- Dispose of contents/container in accordance with local/regional/national/international regulations.
- Chemical safety assessment: A Chemical Safety Assessment has not been carried out.
16. Other Information
- SDS preparation date
- 29 November 2024
- Comments
- This information is based on our present knowledge. However, this shall not constitute a guarantee for any specific product features and shall not establish a legally valid contractual relationship.
