Differential Quik III Staining Kit, Modified Giemsa - Solution A

1. Identification

Product Identifiers

Product Name

Differential Quik III Staining Kit, Modified Giemsa - Solution A

Other Names

Differential quik III Fixative

Product Number(s)

26096-25 (A), 26096-50 (A), 26096-75(A), C26096-25 (A), C26096-50 (A), C26096-75 (A)

CAS Number

67-56-1

Recommended use of the chemical and restriction on use

Company Details

Emergency Contact Details

2. Hazards Identification

Classification of the substance or mixture

Label Elements

Signal Words

None

Hazard Statement(s)

• Highly flammable liquid and vapour
• Toxic if swallowed or in contact with skin
• Harmful if inhaled
• Causes damage to the central nervous system and the visual organs
• May cause damage to organs through prolonged or repeated exposure

Precautionary Statement(s)

• Keep away from heat/sparks/open flames/hot surfaces - No smoking
• Keep container tightly closed
• Ground/bond container and receiving equipment
• Use explosion-proof electrical/ventilating/lighting/equipment
• Use only non-sparking tools
• Take precautionary measures against static discharge
• DO NOT breathe dust/fumes/gas/mist/vapours/spray
• Wash hands thoroughly after handling
• Do not eat, drink or smoke when using this product
• Use only outdoors or in a well-ventilated area
• Wear protective gloves/protective clothing/eye protection/ face protection

Primary route(s) of entry

Human Health

Inhalation

Remove victim to fresh air and keep at rest in a position comfortable for breathing.

Ingestion

Immediately call a POISON CENTRE/doctor. Rinse mouth.

Eyes

Not available

Skin

If on skin (or hair) remove/take off immediately all contaminated clothing. Rinse skin with water/shower. Take off immediately all contaminated clothing and wash it before reuse.

Environment

3. Composition / Information on Ingredients

4. First Aid Measures

Ingestion

Do not induce vomiting; call for medical help immediately.

Inhalation

In case of unconsciousness place patient stably in side position for transportation.

Skin Contact

Immediately wash with water and soap and rinse thoroughly.

Eye Contact

Rinse opened eye for several minutes under running water. Then consult a doctor.

Other Information

• General information:
• Immediately remove any clothing soiled by the product.
• Symptoms of poisoning may even occur after several hours; therefore medical observation for at least 48 hours
• after the accident.
• In case of irregular breathing or respiratory arrest provide artificial respiration.

5. Firefighting Measures

Suitable extinguishing equipment

Fire

CO₂, powder or water spray. Fight larger fires with water spray or alcohol resistant foam.

HAZCHEM

No further relevant information available.

Special protective equipment and precautions for fire fighters

6. Accidental Release Measures

Personal precautions, protective equipment and emergency procedures

Wear protective equipment. Keep unprotected persons away.

Environmental precautions

Dilute with plenty of water. Do not allow to enter sewers/surface or ground water.

Methods and materials for containment and clean up

• Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).
• Dispose contaminated material as waste according to item 13.
• Ensure adequate ventilation.

7. Handling and Storage

Precautions for safe handling

• Ensure good ventilation/exhaustion at the workplace.
• Prevent formation of aerosols.
• Keep ignition sources away - Do not smoke.
• Protect from heat.
• Protect against electrostatic charges.

Conditions for safe storage

Store in a cool location. Keep container tightly sealed. Store in cool, dry conditions in well sealed receptacles. Protect from heat and direct sunlight.

8. Exposure Controls / Personal Protection

Exposure Standards

Engineering controls

• Keep away from foodstuffs, beverages and feed.
• Immediately remove all soiled and contaminated clothing.
• Wash hands before breaks and at the end of work.
• Store protective clothing separately. Avoid contact with the eyes and skin.

Personal protective equipment

Eye and face protection

Tightly sealed goggles.

Skin protection

• Protective gloves. The glove material has to be impermeable and resistant to the product/ the substance/ the preparation.
• Due to missing tests no recommendation to the glove material can be given for the product/ the preparation/ the chemical mixture.
• Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation
• Material of gloves
• The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance of the glove material can not be calculated in advance and has therefore to be checked prior to the application.
• Penetration time of glove material
• The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.

Body protection

Not available

Respiratory protection

In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer exposure use self-contained respiratory protective device.

9. Physical and Chemical Properties

General information

Appearance

Light blue liquid

Odour

Pungent

pH

Not determined

Vapour Pressure

128hPa at 20°C

Density

1.11g/cm³ at 20°C

Boiling Point

64.4°C

Melting Point

-98 °C (-144.4 °F)

Solubility

Fully miscible

Specific Gravity of Density

Not available

Flash Point

9.7 °C (49.5 °F)

Flammable (Explosive) Limits

• Lower: 6 Vol %
• Upper: 36 Vol %

Ignition Temperature

385 °C (725 °F)

Formula

Not available

10. Stability and Reactivity

Reactivity

No further relevant information available

Chemical stability

No decomposition if used according to specifications.

Possibility of hazardous reactions

No dangerous reactions known.

Conditions to avoid

No further relevant information available.

Incompatible materials

No further relevant information available.

11. Toxicological Information

Acute effects

Not available

Eye contact

No irritant effect

Skin contact

No irritant effect

Ingestion

Not available

Inhalation

No sensitising effects known.

Toxicity and irritation

Toxic

12. Ecological Information

Ecotoxicity

No further relevant information available.

Persistence and degradability

No further relevant information available.

Bioaccumulative potential

no further relevant information available.

Other adverse effects

Water hazard class 1: slightly hazardous for water. Do not allow undiluted product or large quantities of it to reach ground water, water course or sewage system.

13. Disposal Considerations

General information

14. Transport Information

ADG label required

HAZCHEM

No further relevant information available.

UN Number

UN1230

Proper shipping name

1230 Methanol solution

Transport hazard class

• Class 3 Flammable liquids
• Label 3±6.1

Packing group

II

Environmental hazard

Not applicable

Special precautions for users

• Warning: Flammable liquids
• Hazard identification number (Kemler code): 336
• EMS Number: F-E,S-D
• Stowage category B
• Stowage code SW2 Clear of living quarters.

Additional information

• Limited quantities (LQ) 1L
• Excepted quantities (EQ) Code: E2
• Maximum net quantity per inner packaging: 30mL
• Maximum net quantity per outer packaging: 500ml

15. Regulatory Information

Poisons Schedule Number

Methyl Alcohol S5, S6

Other Information

Not available

16. Other Information

SDS preparation date

23 May 2025

Comments

This information is based on our present knowledge. However, this shall not constitute a guarantee for any specific product features and shall not establish a legally valid contractual relationship.

References

EMS SDS DIFFERENTIAL QUIK III FIXATIVE https://www.emsdiasum.com/docs/technical/msds/26096_A.pdf 03/05/2022