Safety Data Sheets / Cytoseal™ 60 Mounting Medium
Safety Data Sheet
Cytoseal™ 60 Mounting Medium
1. Identification
Product Identifiers
- Product Name
- Cytoseal 60 Mounting Medium
- Other Names
- Accumount 60 Mounting Medium, Accumount 280 Mounting Medium, Acrylic Resin with Toluene, Aromatic Hydrocarbon
- Product Number(s)
- 18006, 18007, IA013-60-118, IA013-60-473
- CAS Number
- Not available.
Recommended use of the chemical and restriction on use
Laboratory chemicals.
Company Details
ProSciTech Pty Ltd
11 Carlton Street
KIRWAN QLD 4817
Australia
(07) 4773 9444
pst@proscitech.com
proscitech.com.au
11 Carlton Street
KIRWAN QLD 4817
Australia
(07) 4773 9444
pst@proscitech.com
proscitech.com.au
Emergency Contact Details
ProSciTech Pty Ltd
11 Carlton Street
KIRWAN QLD 4817
Australia
(07) 4773 9444
pst@proscitech.com
proscitech.com.au
11 Carlton Street
KIRWAN QLD 4817
Australia
(07) 4773 9444
pst@proscitech.com
proscitech.com.au
2. Hazards Identification
Classification of the substance or mixture
- GHS02 Flame
- Flammable liquids 2 H225 Highly flammable liquid and vapour.
- GHS08 Health hazard
- Reproductive toxicity 1B H360 May damage fertility or the unborn child.
- Specific target organ toxicity (repeated exposure) 2 H373 May cause damage to organs through prolonged or
- repeated exposure.
- Aspiration hazard 1 H304 May be fatal if swallowed and enters airways.
- GHS07
- Acute toxicity - oral 4 H302 Harmful if swallowed.
- Skin irritation 2 H315 Causes skin irritation.
- Eye irritation 2A H319 Causes serious eye irritation.
- Specific target organ toxicity (single exposure) 3 H336 May cause drowsiness or dizziness.
Label Elements



- Signal Words
- None
- Hazard Statement(s)
- Hazard-determining components of labelling:
- Toluene
- Acrylic Resin
- BBP
- Highly flammable liquid and vapour.
- Harmful if swallowed.
- Causes skin irritation.
- Causes serious eye irritation.
- May damage fertility or the unborn child.
- May cause drowsiness or dizziness.
- May cause damage to organs through prolonged or repeated exposure.
- May be fatal if swallowed and enters airways.
- Precautionary Statement(s)
- Obtain special instruction before use.
- Do not handle until all safety precautions have been read and understood.
- Keep away from heat/sparks/open flames/hot surfaces. No smoking.
- Ground/bond container and receiving equipment.
- Use explosion-proof electrical/ventilating/lighting equipment.
- Use only non-sparking tools.
- Take precautionary measures against static discharge.
- Do not breathe dust/fume/gas/mist/vapours/spray.
- Wash thoroughly after handling.
- Do not eat, drink or smoke when using this product.
- Use only outdoors or in a well-ventilated area.
- Wear protective gloves/protective clothing/eye protection/face protection.
Primary route(s) of entry
Inhalation (vapours); also skin contact, eye contact, and accidental ingestion.
Human Health
- Inhalation
- Remove victim to fresh air and keep at rest in a position comfortable for breathing.
- Ingestion
- Immediately call a POISON CENTER/doctor. Do NOT induce vomiting. Rinse mouth.
- Eyes
- Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If exposed or concerned: Get medical advice/attention. If eye irritation persists: Get medical advice/attention.
- Skin
- (or hair) Remove/take off immediately all contaminated clothing. Rinse skin with water/shower. Take off contaminated clothing and wash it before reuse. If skin irritation occurs: Get medical advice/attention.
Environment
- In case of fire: Use CO₂, powder or water spray for extinction.
- Store in a well-ventilated place. Keep container tightly closed.
- Store in a well-ventilated place. Keep cool.
- Store locked up.
- Dispose of contents/container in accordance with local/regional/national/international regulations.
3. Composition / Information on Ingredients
| Name | CAS No. | Content (w/w) | Classification |
|---|---|---|---|
| toluene | 108-88-3 | 45-70% | - |
| Acrylic Resin | 28262-63-7 | 10-30% | - |
| BBP | 85-68-7 | 1-5% | - |
| Butylated hydroxytoluene | 128-37-0 | 0.1-1% | - |
4. First Aid Measures
- Ingestion
- Call for a doctor immediately.
- Inhalation
- In case of unconsciousness place patient stably in side position for transportation.
- Skin Contact
- Immediately wash with water and soap and rinse thoroughly.
- Eye Contact
- Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor.
- Other Information
- Symptoms of poisoning may even occur after several hours; therefore medical observation for at least 48 hours after the accident.
5. Firefighting Measures
Suitable extinguishing equipment
- Fire
- CO₂, sand, extinguishing powder. Do not use water.
- HAZCHEM
- Not available.
Special protective equipment and precautions for fire fighters
For safety reasons unsuitable extinguishing agents: Water with full jet.
6. Accidental Release Measures
- Personal precautions, protective equipment and emergency procedures
- Wear protective equipment. Keep unprotected persons away.
- Environmental precautions
- Inform respective authorities in case of seepage into water course or sewage system. Do not allow to enter sewers/ surface or ground water.
- Methods and materials for containment and clean up
- Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust). Dispose contaminated material as waste according to item 13.
- Ensure adequate ventilation. Do not flush with water or aqueous cleansing agents.
- Protective Action Criteria for Chemicals
- PAC-1:
- 108-88-3 toluene 67 ppm
- 85-68-7 BBP 15 mg/m³
- PAC-2:
- 108-88-3 toluene 560 ppm
- 85-68-7 BBP 77 mg/m³
- PAC-3:
- 108-88-3 toluene 3700* ppm
- 85-68-7 BBP 460 mg/m³
7. Handling and Storage
- Precautions for safe handling
- Ensure good ventilation/exhaustion at the workplace.
- Open and handle receptacle with care.
- Prevent formation of aerosols.
- Conditions for safe storage
- Keep ignition sources away - Do not smoke.
- Protect from heat.
- Protect against electrostatic charges.
- Keep respiratory protective device available.
- Store in a cool location.
- Keep container tightly sealed.
- Store in cool, dry conditions in well sealed receptacles.
- Protect from heat and direct sunlight.
- Keep container in a well-ventilated place.
8. Exposure Controls / Personal Protection
Exposure Standards
| Material | TWA ppm | TWA mg/m³ | STEL ppm | STEL mg/m³ |
|---|---|---|---|---|
| toluene | 100 ppm | 375 mg/m³ | 150 ppm | 560 mg/m³,- |
| Butylated hydroxytoluene | NA | 10 mg/m³ | NA | NA |
- Engineering controls
- Keep away from foodstuffs, beverages and feed.
- Immediately remove all soiled and contaminated clothing.
- Wash hands before breaks and at the end of work.
- Store protective clothing separately.
- Avoid contact with the eyes and skin.
Personal protective equipment
- Eye and face protection
- Tightly sealed goggles.
- Skin protection
- Protective gloves
- The glove material has to be impermeable and resistant to the product/ the substance/ the preparation.
- Due to missing tests no recommendation to the glove material can be given for the product/ the preparation/ the chemical mixture.
- Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation.
- Material of gloves.
- The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance of the glove material can not be calculated in advance and has therefore to be checked prior to the application.
- Penetration time of glove material.
- The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.
- Body protection
- Wear protective clothing.
- Respiratory protection
- In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer exposure use self-contained respiratory protective device.
9. Physical and Chemical Properties
General information
- Appearance
- Colourless liquid
- Odour
- Aromatic
- pH
- Not determined.
- Vapour Pressure
- at 20 °C: 62.7hPa
- Density
- 0.97g/cm³
- Boiling Point
- 110.6 °C
- Melting Point
- Undetermined.
- Solubility
- Not miscible or difficult to mix with water.
- Specific Gravity of Density
- Not determined.
- Flash Point
- 4.4 °C (39.9 °F)
- Flammable (Explosive) Limits
- Lower: 1.2 Vol %
- Upper: 7.0 Vol %
- Ignition Temperature
- 535 °C (995 °F)
- Formula
- Not available.
10. Stability and Reactivity
- Reactivity
- No further relevant information available.
- Chemical stability
- No decomposition if used according to specifications.
- Possibility of hazardous reactions
- No dangerous reactions known.
- Conditions to avoid
- No further relevant information available.
- Incompatible materials
- No further relevant information available.
11. Toxicological Information
- Acute effects
- LD/LC50 values relevant for classification:
- 108-88-3 toluene
- Oral LD50 5000 mg/kg (rat)
- Dermal LD50 12124 mg/kg (rabbit)
- Inhalative LC50/4 h 5320 mg/l (mouse)
- Eye contact
- Irritating effect.
- Skin contact
- Irritant to skin and mucous membranes.
- Ingestion
- No further relevant information available.
- Inhalation
- No sensitising effects known.
- Toxicity and irritation
- The product shows the following dangers according to the calculation method of the General EU Classification Guidelines for Preparations as issued in the latest version.
- Harmful.
- Irritant.
- Carcinogenic categories
- IARC (International Agency for Research on Cancer)
- 108-88-3 toluene 3
- 6002385-68-7 BBP 3
- 128-37-0 Butylated hydroxytoluene 3
- NTP (National Toxicology Program)
- None of the ingredients is listed.
- OSHA-Ca (Occupational Safety Health Administration)
- None of the ingredients is listed.
12. Ecological Information
- Ecotoxicity
- Toxic for fish.
- Persistence and degradability
- No further relevant information available.
- Bioaccumulative potential
- No further relevant information available.
- Other adverse effects
- Water hazard class 2 (German Regulation) (Self-assessment): hazardous for water.
- Do not allow product to reach ground water, water course or sewage system.
- Danger to drinking water if even small quantities leak into the ground.
- Also poisonous for fish and plankton in water bodies.
- Toxic for aquatic organisms.
13. Disposal Considerations
General information
- Must not be disposed together with household garbage. Do not allow product to reach sewage system.
- Uncleaned packaging:
- Recommendation: Disposal must be made according to official regulations.
14. Transport Information
ADG label required


- HAZCHEM
- Not available.
- UN Number
- UN1866
- Proper shipping name
- UN proper shipping name
- DOT Resin solution
- ADR 1866 RESIN SOLUTION, ENVIRONMENTALLY HAZARDOUS
- IMDG RESIN SOLUTION, MARINE POLLUTANT
- IATA RESIN SOLUTION
- Transport hazard class
- DOT
- Class 3 Flammable liquids
- Label 3
- ADR, IMDG
- Class 3 Flammable liquids
- Label 3
- IATA
- Class 3 Flammable liquids
- Label 3
- Packing group
- DOT, ADR, IMDG, IATA: II
- Environmental hazard
- Environmental hazards: Product contains environmentally hazardous substances: BBP
- Marine pollutant: Symbol (fish and tree)
- Special marking (ADR): Symbol (fish and tree)
- Special precautions for users
- Warning: Flammable liquids.
- Danger code (Kemler): 336
- EMS Number: F-E,S-D
- Stowage Category: B
- Additional information
- DOT
- Quantity limitations: On passenger aircraft/rail: 1 L
- On cargo aircraft only: 60 L
- ADR
- Excepted quantities (EQ) Code: E2
- Maximum net quantity per inner packaging: 30 mL
- Maximum net quantity per outer packaging: 500 mL
- IMDG
- Limited quantities (LQ) 1L
- Excepted quantities (EQ) Code: E2
- Maximum net quantity per inner packaging: 30 mL
- Maximum net quantity per outer packaging: 500 mL
- Special precautions for user Warning: Flammable liquids
- Hazard identification number (Kemler code): 336
- EMS Number: F-E,S-D
15. Regulatory Information
- Poisons Schedule Number
- 108-88-3 toluene S6
- 85-68-7 BBP S10
- Other Information
- Sara
- Section 355 (extremely hazardous substances): None of the ingredients is listed.
- Section 313 (Specific toxic chemical listings): 108-88-3 toluene
- TSCA (Toxic Substances Control Act): All components have the value ACTIVE.
- Hazardous Air Pollutants: 108-88-3 toluene
- Proposition 65
- Chemicals known to cause cancer: None of the ingredients is listed.
- Chemicals known to cause reproductive toxicity for females: None of the ingredients is listed.
- Chemicals known to cause reproductive toxicity for males: None of the ingredients is listed.
- Chemicals known to cause developmental toxicity:
- 108-88-3 toluene
- 85-68-7 BBP
- Carcinogenic categories
- EPA (Environmental Protection Agency)
- 108-88-3 toluene II
- 85-68-7 BBP C
- TLV (Threshold Limit Value)
- 108-88-3 toluene A4
- 128-37-0 Butylated hydroxytoluene A4
- NIOSH-Ca (National Institute for Occupational Safety and Health)
- None of the ingredients is listed.
- A Chemical Safety Assessment has not been carried out.
16. Other Information
- SDS preparation date
- 17 July 2026
- Comments
- Abbreviations and acronyms:
- ADR: Accord relatif au transport international des marchandises dangereuses par route (European Agreement Concerning the International
- Carriage of Dangerous Goods by Road)
- IMDG: International Maritime Code for Dangerous Goods
- DOT: US Department of Transportation
- IATA: International Air Transport Association
- EINECS: European Inventory of Existing Commercial Chemical Substances
- ELINCS: European List of Notified Chemical Substances
- CAS: Chemical Abstracts Service (division of the American Chemical Society)
- NFPA: National Fire Protection Association (USA)
- HMIS: Hazardous Materials Identification System (USA)
- VOC: Volatile Organic Compounds (USA, EU)
- LC50: Lethal concentration, 50 percent
- LD50: Lethal dose, 50 percent
- PBT: Persistent, Bioaccumulative and Toxic
- vPvB: very Persistent and very Bioaccumulative
- NIOSH: National Institute for Occupational Safety
- OSHA: Occupational Safety Health
- TLV: Threshold Limit Value
- PEL: Permissible Exposure Limit
- REL: Recommended Exposure Limit
- BEI: Biological Exposure Limit
- Flammable liquids 2: Flammable liquids - Category 2
- Acute toxicity - oral 4: Acute toxicity - Category 4
- Skin irritation 2: Skin corrosion/irritation - Category 2
- Eye irritation 2A: Serious eye damage/eye irritation - Category 2A
- Reproductive toxicity 1B: Reproductive toxicity - Category 1B
- Specific target organ toxicity (single exposure) 3: Specific target organ toxicity (single exposure) - Category 3
- Specific target organ toxicity (repeated exposure) 2: Specific target organ toxicity (repeated exposure) - Category 2
- Aspiration hazard 1: Aspiration hazard - Category 1
- References
- EMS SDS "CYTOSEAL 60" 17/06/2022 https://www.emsdiasum.com/docs/technical/msds/18006.pdf
