Safety Data Sheets / Conductive Carbon/Graphite Paint, SEM Adhesive 154
Safety Data Sheet
Conductive Carbon/Graphite Paint, SEM Adhesive 154
1. Identification
Product Identifiers
- Product Name
- Conductive Carbon/Graphite Paint, SEM Adhesive 154
- Other Names
- Electrodag 15, Graphite Conductive Adhesive 154, Paint related material, DAG 154
- Product Number(s)
- I003
- CAS Number
- N/A
Recommended use of the chemical and restriction on use
Laboratory use. Used as an adhesive to mount SEM samples.
Company Details
ProSciTech Pty Ltd
11 Carlton Street
KIRWAN QLD 4817
Australia
(07) 4773 9444
pst@proscitech.com
proscitech.com.au
11 Carlton Street
KIRWAN QLD 4817
Australia
(07) 4773 9444
pst@proscitech.com
proscitech.com.au
Emergency Contact Details
ProSciTech Pty Ltd
11 Carlton Street
KIRWAN QLD 4817
Australia
(07) 4773 9444
pst@proscitech.com
proscitech.com.au
11 Carlton Street
KIRWAN QLD 4817
Australia
(07) 4773 9444
pst@proscitech.com
proscitech.com.au
2. Hazards Identification
Classification of the substance or mixture
Hazardous according to criteria of Hazardous Substances Information System [HSIS Worksafe Australia].
Label Elements


- Signal Words
- None
- Hazard Statement(s)
- H225: Highly flammable liquid and vapour
- H319: Causes serious eye irritation
- H336: May cause drowsiness or dizziness
- H333: May be harmful if inhaled
- H316: Causes mild skin irritation
- Precautionary Statement(s)
- P210: Keep away from heat/sparks/open flames/hot surfaces. - No smoking.
- P241: Use explosion-proof electrical/ventilating/lighting/.../equipment.
- P303 ± P361 ± P353: IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.
- P405: Store locked up.
- P501: Dispose of contents/container in accordance with local/regional/national/international regulations.
Primary route(s) of entry
Irritant to skin and mucas membranesIrritating to eyes
Human Health
- Inhalation
- No further relevant information available.
- Ingestion
- No further relevant information available.
- Eyes
- Irritating effecton the eyes
- Skin
- Irritant to skin and mucous membranes.
Environment
Water hazard class 1 (Self-assessment): slightly hazardous for water Do not allow undiluted product or large quantities of it to reach ground water, water course or sewage system
3. Composition / Information on Ingredients
| Name | CAS No. | Content (w/w) | Classification |
|---|---|---|---|
| Isopropyl alcohol | 67-63-0 | 66% | >50-≤100% |
| Graphite | 7782-42-5 | 15% | >10-≤25% |
| n-Butyl alcohol | 71-36-3 | 5 | >2.5-≤10% |
| 2-methylpentane-2,4-diol | 107-41-5 | 5 | >2.5-≤10% |
| 1-methoxy-2-propanol | 107-98-2 | 5 | >2.5-≤10% |
4. First Aid Measures
- Ingestion
- Keep individual calm and seek medical attention.
- Inhalation
- If affected, remove individual to fresh air; if breathing is difficult, administer oxygen; if breathing has stopped, give artificial respiration and seek medical attention immediately. In case of unconsciousness place patient stably in side position for transportation.
- Skin Contact
- Wash with soap and water; remove contaminated clothing and launder before reuse. If irritation occurs/persists seek medical attention.
- Eye Contact
- Flush eyes with water, lifting upper and lower lids occasionally for several minutes, and seek medical attention immediately.
- Other Information
- Symptoms of poisoning may even occur after several hours; therefore medical observation for at least 48 hours after the accident
5. Firefighting Measures
Suitable extinguishing equipment
- Fire
- Water spray (fog), foam, dry chemical or carbon dioxide.
- Large Fire
- Foam, carbon dioxide, dry chemical.
- HAZCHEM
- 2SE
Special protective equipment and precautions for fire fighters
Mouth respiratory protective device.
6. Accidental Release Measures
- Personal precautions, protective equipment and emergency procedures
- Wear protective equipment. Keep unprotected persons away.
- Environmental precautions
- Do not allow to enter sewers/ surface or ground water
- Methods and materials for containment and clean up
- Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust). Dispose contaminated material as waste according to item 13.Ensure adequate ventilation. Do not flush with water or aqueous cleansing agents
7. Handling and Storage
- Precautions for safe handling
- Avoid prolonged inhalation of mists or vapours. Wear protective clothing when handling. Wash thoroughly after handling.
- Conditions for safe storage
- Keep ignition sources away - Do not smoke. Protect from heat. Protect against electrostatic chargesKeep receptacle tightly sealed.
- Store in cool, dry conditions in well sealed containers
- Protect from heat and direct sunlight.
8. Exposure Controls / Personal Protection
Exposure Standards
| Material | TWA ppm | TWA mg/m³ | STEL ppm | STEL mg/m³ |
|---|---|---|---|---|
| 67-63-0 Isopropyl alcohol | 400ppm | 980mg/m3 | 492ppm | 1225mg/m3 |
| 7782-42-5 Graphite | ? | 3mg/m3 | ? | ? |
| 71-36-3 n-Butyl alcohol | 50ppm | 150mg/m3 - PEAK Limitation | ? | ? |
| 107-41-5 2-methylpentane-2,4-diol | 25ppm | 125mg/m3 - PEAK Limitation | ? | ? |
| 107-98-2 1-methoxy-2-propanol | 100ppm | 369mg/m3 | 150ppm | 540mg/m3 |
- Engineering controls
- Provide sufficient mechanical ventilation to maintain exposure below the National Exposure Standards.Prevent formation of aerosols.
Personal protective equipment
- Eye and face protection
- Wear chemical splash goggles.
- Skin protection
- Wear solvent resistant gloves.
- Body protection
- No special equipment deemed necessary under normal usage.
- Respiratory protection
- If the TLV of the product is exceeded, a mechanical or self-contained breathing apparatus is advised.
9. Physical and Chemical Properties
General information
- Appearance
- Black liquid
- Odour
- Alcohol like sharp odour
- pH
- Not available.
- Vapour Pressure
- 43 hPa (32.3 mm Hg)
- Density
- Not available.
- Boiling Point
- Not available.
- Melting Point
- Not available.
- Solubility
- Partially soluble in water. Difficult to mix
- Specific Gravity of Density
- Not available
- Flash Point
- 13 °C (55.4 °F)
- Flammable (Explosive) Limits
- 12°C (tagged closed cup).
- Ignition Temperature
- 425 °C (797 °F)
- Formula
- Not available.
10. Stability and Reactivity
- Reactivity
- No further relevant information available.
- Chemical stability
- Stable under normal conditions of use.
- Possibility of hazardous reactions
- No dangerous reactions known
- Conditions to avoid
- Keep away from sparks, open flames or other sources of ignition and incompatible materials.
- Incompatible materials
- : No further relevant information available
11. Toxicological Information
- Acute effects
- LD/LC50 values that are relevant for classification: 67-63-0 propan-2-ol Oral LD50 5,045 mg/kg (rat) Dermal LD50 12,800 mg/kg (rabbit) Inhalative LC50/4 h 30 mg/l (rat)
- : Irritant to skin and mucous membranes
- : Irritating eye effect
- Eye contact
- May cause severe irritation, burning sensation, blurred vision.
- Skin contact
- Irritant to skin and mucous membranes.
- Ingestion
- Not available
- Inhalation
- Excessive inhalation of vapours or mists can cause nasal and respiratory irritation, dizziness, nausea, and headache.
- Toxicity and irritation
- Group 3: Not classifiable as to its carcinogenicity to humans.
12. Ecological Information
- Ecotoxicity
- Not available.
- Persistence and degradability
- Not available.
- Bioaccumulative potential
- Not available.
- Other adverse effects
- Water hazard class 1 (Self-assessment): slightly hazardous for water Do not allow undiluted product or large quantities of it to reach ground water, water course or sewage system.
13. Disposal Considerations
General information
Consult with Federal, State and local waste regulations.Must not be disposed of together with household garbage. Do not allow product to reach sewage system.
14. Transport Information
ADG label required

- HAZCHEM
- 2SE
- UN Number
- UN1993
- Proper shipping name
- Flammable liquids, n.o.s. (Isopropanol)
- Transport hazard class
- 3
- Packing group
- PG II
- Environmental hazard
- No information available.
- Special precautions for users
- Warning: Flammable liquids
- Additional information
- No further relevant information available.
15. Regulatory Information
- Poisons Schedule Number
- None Allocated.
- Other Information
- No further information available.
16. Other Information
- SDS preparation date
- 19 February 2026
- Comments
- This information is based on our present knowledge. However, this shall not constitute a guarantee for any specific product features and shall not establish a legally valid contractual relationship.
- References
- List of Publications referenced when creating this MSDS;
- Hazardous Substances Information System Consolidated Lists: Safe Work Australia.
- APPROVED CRITERIA FOR CLASSIFYING HAZARDOUS SUBSTANCES [NOHSC:1008(2004)] 3rd Edition: National Occupational Health and Safety Commission.- Dangerous Goods ? Initial Emergency Response Guide (SAA/SNZ HB76:1997).
- IATA Dangerous Goods Regulations.
- Adopted National Exposure Standards for Atmospheric Contaminants in the Occupational Environment [NOHSC:1003(1995)].
- Australia Standard for the Uniform Scheduling of Drugs and Poisons [SUSPD] (Australian Government Department of Health and Ageing).
