Safety Data Sheets / Clear-Mount with Tris Buffer
Safety Data Sheet
Clear-Mount with Tris Buffer
1. Identification
Product Identifiers
- Product Name
- Clear-Mount with Tris Buffer
- Other Names
- N/A
- Product Number(s)
- 17985-12, 17985-15, IM032
- CAS Number
- 26628-22-8
Recommended use of the chemical and restriction on use
Laboratory use
Company Details
ProSciTech Pty Ltd
11 Carlton Street
KIRWAN QLD 4817
Australia
(07) 4773 9444
pst@proscitech.com
proscitech.com.au
11 Carlton Street
KIRWAN QLD 4817
Australia
(07) 4773 9444
pst@proscitech.com
proscitech.com.au
Emergency Contact Details
ProSciTech Pty Ltd
11 Carlton Street
KIRWAN QLD 4817
Australia
(07) 4773 9444
pst@proscitech.com
proscitech.com.au
11 Carlton Street
KIRWAN QLD 4817
Australia
(07) 4773 9444
pst@proscitech.com
proscitech.com.au
2. Hazards Identification
Classification of the substance or mixture
- GHS07
- Acute Tox. 4 H302 Harmful if swallowed.
Label Elements
- Signal Words
- Warning
- Hazard Statement(s)
- Harmful if swallowed.
- Precautionary Statement(s)
- Wash thoroughly after handling.
- Do not eat, drink or smoke when using this product.
- If swallowed: Call a poison center/doctor if you feel unwell.
- Rinse mouth.
- Store in a dry place. Store in a closed container.
- Dispose of contents/container in accordance with local/regional/national/international regulations.
Primary route(s) of entry
Not available.
Human Health
- Inhalation
- Not available.
- Ingestion
- Rinse mouth.
- Call a POISON CENTER/doctor if you feel unwell.
- Eyes
- Not available.
- Skin
- Not available.
Environment
Dispose of contents/container in accordance with local/regional/national/international regulations.
3. Composition / Information on Ingredients
| Name | CAS No. | Content (w/w) | Classification |
|---|---|---|---|
| sodium azide | 26628-22-8 | ≤ 2.5% | - |
4. First Aid Measures
- Ingestion
- If symptoms persist consult doctor.
- Inhalation
- Supply fresh air; consult doctor in case of complaints.
- Skin Contact
- Generally the product does not irritate the skin.
- Eye Contact
- Rinse opened eye for several minutes under running water.
- Other Information
- No further relevant information available.
5. Firefighting Measures
Suitable extinguishing equipment
- Fire
- CO₂, powder or water spray. Fight larger fires with water spray or alcohol resistant foam.
- HAZCHEM
- Not available.
Special protective equipment and precautions for fire fighters
No special measures required.
6. Accidental Release Measures
- Personal precautions, protective equipment and emergency procedures
- Not required.
- Environmental precautions
- No special measures required.
- Methods and materials for containment and clean up
- Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).
7. Handling and Storage
- Precautions for safe handling
- No special precautions are necessary if used correctly.
- Conditions for safe storage
- No special requirements.
- Store in a dry place. Store in a closed container.
8. Exposure Controls / Personal Protection
Exposure Standards
| Material | TWA ppm | TWA mg/m³ | STEL ppm | STEL mg/m³ |
|---|---|---|---|---|
| sodium azide | - | - | 0.11 ppm | 0.29 mg/m³ |
- Engineering controls
- Wash hands before breaks and at the end of work
- Store in a dry place. Store in a closed container.
Personal protective equipment
- Eye and face protection
- Goggles recommended during refilling.
- Skin protection
- Wash hands before breaks and at the end of work.
- Protection of hands
- The glove material has to be impermeable and resistant to the product/ the substance/ the preparation.
- Due to missing tests no recommendation to the glove material can be given for the product/ the preparation/ the chemical mixture.
- Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation.
- Material of gloves
- The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance of the glove material can not be calculated in advance and has therefore to be checked prior to the application.
- Penetration time of glove material
- The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.
- Body protection
- No information available.
- Respiratory protection
- Not required.
9. Physical and Chemical Properties
General information
- Appearance
- Fluid
- Odour
- Characteristic
- pH
- Not determined.
- Vapour Pressure
- 23 hPa at 20 °C
- Density
- Not determined.
- Boiling Point
- Undetermined.
- Melting Point
- Undetermined.
- Solubility
- Not miscible or difficult to mix with water
- Specific Gravity of Density
- Not determined.
- Flash Point
- Not applicable.
- Flammable (Explosive) Limits
- Not applicable.
- Ignition Temperature
- Product is not selfigniting.
- Formula
- Solvent content:
- Organic solvents: 0.0 %
- Water: 83.3 %
10. Stability and Reactivity
- Reactivity
- No further relevant information available.
- Chemical stability
- Stable under normal conditions
- Possibility of hazardous reactions
- No dangerous reactions known.
- Conditions to avoid
- No further relevant information available.
- Incompatible materials
- No further relevant information available.
11. Toxicological Information
- Acute effects
- LD/LC50 values relevant for classification:
- 26628-22-8 sodium azide
- Oral LD50 27 mg/kg (rat)
- Dermal LD50 20 mg/kg (rabbit)
- Eye contact
- No irritating effect.
- Skin contact
- No irritating effect.
- Ingestion
- No further relevant information available.
- Inhalation
- No sensitising effects known.
- Toxicity and irritation
- No further relevant information available.
12. Ecological Information
- Ecotoxicity
- No further relevant information available.
- Persistence and degradability
- No further relevant information available.
- Bioaccumulative potential
- No further relevant information available.
- Other adverse effects
- Not known to be hazardous to water.
13. Disposal Considerations
General information
- Must not be disposed together with household garbage. Do not allow product to reach sewage system.
- Recommendation
- Disposal must be made according to official regulations.
14. Transport Information
ADG label required
- HAZCHEM
- Not available.
- UN Number
- None.
- Proper shipping name
- Not regulated.
- Transport hazard class
- 0
- Packing group
- None.
- Environmental hazard
- No
- Special precautions for users
- Not applicable.
- Additional information
- No information available.
15. Regulatory Information
- Poisons Schedule Number
- TLV (Threshold Limit Value established by ACGIH)
- 26628-22-8 sodium azide A4
- Other Information
- Australian Inventory of Chemical Substances&l
16. Other Information
- SDS preparation date
- 27 November 2024
- Comments
- This information is based on our present knowledge. However, this shall not constitute a guarantee for any specific product features and shall not establish a legally valid contractual relationship.This Safety Data Sheet (SDS) has been prepared in compliance with the Preparation of Safety Data Sheets for Hazardous Chemicals Code of Practice February 2016. It is the user's responsibility to determine the suitability of this information for adoption of necessary safety precautions. The information published in this SDS has been compiled from the publications listed in Section 16: to the best of our ability and knowledge these publications are considered accurate. We reserve the right to revise Safety Data Sheets as new information becomes available. Copies may be made for non-profit use.