Safety Data Sheets / Citifluor CFMR2 Antifadent Solution
Safety Data Sheet
Citifluor CFMR2 Antifadent Solution
1. Identification
Product Identifiers
- Product Name
- Citifluor CFMR2 Antifadent Solution
- Other Names
- Not available.
- Product Number(s)
- 17979-10, EMS17979-10
- CAS Number
- Not available.
Recommended use of the chemical and restriction on use
Laboratory chemicals
Company Details
ProSciTech Pty Ltd
11 Carlton Street
KIRWAN QLD 4817
Australia
(07) 4773 9444
pst@proscitech.com
proscitech.com.au
11 Carlton Street
KIRWAN QLD 4817
Australia
(07) 4773 9444
pst@proscitech.com
proscitech.com.au
Emergency Contact Details
ProSciTech Pty Ltd
11 Carlton Street
KIRWAN QLD 4817
Australia
(07) 4773 9444
pst@proscitech.com
proscitech.com.au
11 Carlton Street
KIRWAN QLD 4817
Australia
(07) 4773 9444
pst@proscitech.com
proscitech.com.au
2. Hazards Identification
Classification of the substance or mixture
- GHS07
- Acute Tox. 4 H302 Harmful if swallowed.
- Skin Irrit. 2 H315 Causes skin irritation.
- Eye Irrit. 2A H319 Causes serious eye irritation.
Label Elements
- Signal Words
- Warning
- Hazard Statement(s)
- Harmful if swallowed.
- Causes skin irritation.
- Causes serious eye irritation.
- Precautionary Statement(s)
- Wash thoroughly after handling.
- Do not eat, drink or smoke when using this product.
- Wear protective gloves/eye protection/face protection.
Primary route(s) of entry
Not available
Human Health
- Inhalation
- Not available
- Ingestion
- Call a POISON CENTER/doctor if you feel unwell. Rinse mouth.
- Eyes
- Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention.
- Skin
- Wash with plenty of water. If skin irritation occurs: Get medical advice/attention. Take off contaminated clothing and wash it before reuse.
Environment
Dispose of contents/container in accordance with local/regional/national/international regulations
3. Composition / Information on Ingredients
| Name | CAS No. | Content (w/w) | Classification |
|---|---|---|---|
| pyridine 1-oxide | 694-59-7 | >25-≤50% | Mixture |
| glycerol | 56-81-5 | >25-≤50% | Mixture |
4. First Aid Measures
- Ingestion
- If symptoms persist consult doctor.
- Inhalation
- Supply fresh air. If required, provide artificial respiration. Keep patient warm. Consult doctor if symptoms persist.
- In case of unconsciousness place patient stably in side position for transportation.
- Skin Contact
- Generally the product does not irritate the skin.
- Eye Contact
- Rinse opened eye for several minutes under running water.
- Other Information
- Symptoms of poisoning may even occur after several hours; therefore medical observation for at least 48 hours after the accident.
5. Firefighting Measures
Suitable extinguishing equipment
- Fire
- Use fire extinguishing methods suitable to surrounding conditions.
- HAZCHEM
- No further relevant information available.
Special protective equipment and precautions for fire fighters
Mouth respiratory protective device.
6. Accidental Release Measures
- Personal precautions, protective equipment and emergency procedures
- Not required.
- Environmental precautions
- Dilute with plenty of water.
- Do not allow to enter sewers/surface or ground water.
- Methods and materials for containment and clean up
- Absorb with liquid-binding material (sand, acid binders, universal binders, sawdust).
- Dispose contaminated material as waste according to item 13.
- Ensure adequate ventilation.
7. Handling and Storage
- Precautions for safe handling
- Ensure good ventilation/exhaustion at the workplace.
- Prevent formation of aerosols.
- Conditions for safe storage
- Keep container tightly closed.
8. Exposure Controls / Personal Protection
Exposure Standards
| Material | TWA ppm | TWA mg/m³ | STEL ppm | STEL mg/m³ |
|---|---|---|---|---|
| glycerol | - | - | - | 10mg/m³ |
- Engineering controls
- Keep away from foodstuffs, beverages and feed.
- Wash hands before breaks and at the end of work.
- Avoid contact with the eyes and skin.
Personal protective equipment
- Eye and face protection
- Goggles recommended during refilling.
- Skin protection
- Wear protective gloves. The glove material has to be impermeable and resistant to the product/the substance/the preparation. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation. The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.
- Body protection
- Not available.
- Respiratory protection
- In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer exposure use self-contained respiratory protective device.
9. Physical and Chemical Properties
General information
- Appearance
- Clear liquid
- Odour
- Light.
- pH
- 8
- Vapour Pressure
- <0.1hPa
- Density
- Not determined.
- Boiling Point
- Undetermined
- Melting Point
- Undetermined
- Solubility
- Fully miscible
- Specific Gravity of Density
- Not determined.
- Flash Point
- Not applicable
- Flammable (Explosive) Limits
- Not determined.
- Ignition Temperature
- 400°C
- Formula
- Not available.
10. Stability and Reactivity
- Reactivity
- No further relevant information available.
- Chemical stability
- No decomposition if used according to specifications.
- Possibility of hazardous reactions
- No dangerous reactions known.
- Conditions to avoid
- No further relevant information available.
- Incompatible materials
- No further relevant information available.
11. Toxicological Information
- Acute effects
- Not available.
- Eye contact
- No irritating effect.
- Skin contact
- No irritant effect
- Ingestion
- Not available.
- Inhalation
- No sensitising effects known.
- Toxicity and irritation
- Harmful
12. Ecological Information
- Ecotoxicity
- No further relevant information available.
- Persistence and degradability
- No further relevant information available.
- Bioaccumulative potential
- No further relevant information available.
- Other adverse effects
- Water hazard class 1: slightly hazardous for water.
- Do not allow undiluted product or large quantities of it to reach ground water, water course or sewage system.
13. Disposal Considerations
General information
- Must not be disposed together with household garbage. Do not allow product to reach sewage system.
- Disposal must be made according to official regulations.
- Recommended cleansing agents: Water if necessary together with cleansing agents.
14. Transport Information
ADG label required
- HAZCHEM
- No further relevant information available.
- UN Number
- Not available.
- Proper shipping name
- Not available.
- Transport hazard class
- Not available.
- Packing group
- Not available.
- Environmental hazard
- Not applicable.
- Special precautions for users
- Stowage category: A
- Additional information
- Limited quantities (LQ): 5L
- Excepted quantities (EQ): Code E1
- Maximum net quantity per inner packaging: 30mL
- Maximum net quantity per outer packaging: 100ml
15. Regulatory Information
- Poisons Schedule Number
- None of the ingredients is listed.
- Other Information
- A Chemical Safety Assessment has not been carried out.
16. Other Information
- SDS preparation date
- 27 November 2024
- Comments
- This information is based on our present knowledge. However, this shall not constitute a guarantee for any specific product features and shall not establish a legally valid contractual relationship.