Safety Data Sheets / Citifluor AF300 Antifadent Solution
Safety Data Sheet
Citifluor AF300 Antifadent Solution
1. Identification
Product Identifiers
- Product Name
- Citifluor AF300 Antifadent Solution
- Other Names
- Not available
- Product Number(s)
- 17977-25, EMS17977-25
- CAS Number
- Not available.
Recommended use of the chemical and restriction on use
Laboratory chemicals
Company Details
ProSciTech Pty Ltd
11 Carlton Street
KIRWAN QLD 4817
Australia
(07) 4773 9444
pst@proscitech.com
proscitech.com.au
11 Carlton Street
KIRWAN QLD 4817
Australia
(07) 4773 9444
pst@proscitech.com
proscitech.com.au
Emergency Contact Details
ProSciTech Pty Ltd
11 Carlton Street
KIRWAN QLD 4817
Australia
(07) 4773 9444
pst@proscitech.com
proscitech.com.au
11 Carlton Street
KIRWAN QLD 4817
Australia
(07) 4773 9444
pst@proscitech.com
proscitech.com.au
2. Hazards Identification
Classification of the substance or mixture
- GHS05 Corrosion
- Skin Corrosion 1B H314 Causes severe skin burns and eye damage.
- Eye Damage 1 H318 Causes serious eye damage.
Label Elements
- Signal Words
- None
- Hazard Statement(s)
- Hazard-determining components of labelling:
- triethylenediamine
- Causes severe skin burns and eye damage.
- Precautionary Statement(s)
- Do not breathe dusts or mists.
- Wash thoroughly after handling.
- Wear protective gloves/eye protection/face protection.
Human Health
- Inhalation
- Remove person to fresh air and keep comfortable for breathing.
- Ingestion
- Rinse mouth. Do NOT induce vomiting.
- Eyes
- Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
- Skin
- (or hair) Take off immediately all contaminated clothing. Rinse skin with water/shower. Wash contaminated clothing before reuse.
Environment
- Store locked up.
- Dispose of contents/container in accordance with local/regional/national/international regulations.
3. Composition / Information on Ingredients
| Name | CAS No. | Content (w/w) | Classification |
|---|---|---|---|
| glycerol | 56-81-5 | >50-≤100% | Mixtures |
| triethylenediamine | 280-57-9 | >2.5-≤10% | Mixtures |
4. First Aid Measures
- Ingestion
- Drink copious amounts of water and provide fresh air. Immediately call a doctor.
- Inhalation
- In case of unconsciousness place patient stably in side position for transportation.
- Skin Contact
- Immediately wash with water and soap and rinse thoroughly. Immediately remove any clothing soiled by the product.
- Eye Contact
- Rinse opened eye for several minutes under running water. Then consult a doctor.
- Other Information
- No further relevant information available.
5. Firefighting Measures
Suitable extinguishing equipment
- Fire
- Use fire fighting measures that suit the environment.
- HAZCHEM
- No further relevant information available.
Special protective equipment and precautions for fire fighters
No special measures required.
6. Accidental Release Measures
- Personal precautions, protective equipment and emergency procedures
- Wear protective equipment. Keep unprotected persons away.
- Environmental precautions
- Dilute with plenty of water. Do not allow to enter sewers/surface or ground water.
- Methods and materials for containment and clean up
- Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).
- Use neutralizing agent.
- Dispose contaminated material as waste according to item 13.
- Ensure adequate ventilation.
7. Handling and Storage
- Precautions for safe handling
- Ensure good ventilation/exhaustion at the workplace.
- Prevent formation of aerosols.
- Keep ignition sources away - Do not smoke.
- Conditions for safe storage
- Keep receptacle tightly sealed.
8. Exposure Controls / Personal Protection
Exposure Standards
| Material | TWA ppm | TWA mg/m³ | STEL ppm | STEL mg/m³ |
|---|---|---|---|---|
| glycerol | - | - | - |
- Engineering controls
- Keep away from foodstuffs, beverages and feed.
- Immediately remove all soiled and contaminated clothing.
- Wash hands before breaks and at the end of work.
- Avoid contact with the eyes and skin.
Personal protective equipment
- Eye and face protection
- Tightly sealed goggles.
- Skin protection
- Wear protective gloves. The glove material has to be impermeable and resistant to the product/the substance/the preparation. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation. The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.
- Body protection
- Not available.
- Respiratory protection
- In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer exposure use respiratory protective device that is independent of circulating air.
9. Physical and Chemical Properties
General information
- Appearance
- Clear liquid
- Odour
- Unpleasant
- pH
- Not determined.
- Vapour Pressure
- 0.2hPa
- Density
- 1.248g/cm³
- Boiling Point
- >100°C
- Melting Point
- Undetermined
- Solubility
- Fully miscible
- Specific Gravity of Density
- Not available
- Flash Point
- 160°C
- Flammable (Explosive) Limits
- Not determined
- Ignition Temperature
- Product is not selfigniting
- Formula
- Not available.
10. Stability and Reactivity
- Reactivity
- No further relevant information available.
- Chemical stability
- No decomposition if used according to specifications.
- Possibility of hazardous reactions
- No dangerous reactions known.
- Conditions to avoid
- No further relevant information available.
- Incompatible materials
- No further relevant information available.
11. Toxicological Information
- Acute effects
- Not available.
- Eye contact
- Strong caustic effect.
- Skin contact
- Caustic effect on skin and mucous membranes.
- Ingestion
- Swallowing will lead to a strong caustic effect on mouth and throat and to the danger of perforation of oesophagus and stomach
- Inhalation
- Not available.
- Toxicity and irritation
- Corrosive
12. Ecological Information
- Ecotoxicity
- No further relevant information available.
- Persistence and degradability
- No further relevant information available.
- Bioaccumulative potential
- No further relevant information available.
- Other adverse effects
- Water hazard class 1: slightly hazardous for water.
- Do not allow undiluted product or large quantities of it to reach ground water, water course or sewage system.
- Must not reach bodies of water or drainage ditch undiluted or unneutralized.
13. Disposal Considerations
General information
- Must not be disposed of together with household garbage. Do not allow product to reach sewage system.
- Disposal must be made according to official regulations.
- Recommended cleansing agent: Water, if necessary with cleansing agents.
14. Transport Information
ADG label required
- HAZCHEM
- No further relevant information available.
- UN Number
- Void
- Proper shipping name
- Void
- Transport hazard class
- Void
- Packing group
- Void
- Environmental hazard
- Not applicable.
- Special precautions for users
- Not applicable.
- Additional information
- Not available.
15. Regulatory Information
- Poisons Schedule Number
- None of the items is listed.
- Other Information
- A Chemical Safety Assessment has not been carried out.
16. Other Information
- SDS preparation date
- 23 January 2023
- Comments
- This information is based on our present knowledge. However, this shall not constitute a guarantee for any specific product features and shall not establish a legally valid contractual relationship.