Safety Data Sheets / CCC Thinner
Safety Data Sheet
CCC Thinner
1. Identification
Product Identifiers
- Product Name
- CCC Thinner
- Other Names
- AB LEIT - CCC Thinner
- Product Number(s)
- EMS12665; 12665
Recommended use of the chemical and restriction on use
Laboratory use
Company Details
ProSciTech Pty Ltd
11 Carlton Street
KIRWAN QLD 4817
Australia
(07) 4773 9444
pst@proscitech.com
proscitech.com.au
11 Carlton Street
KIRWAN QLD 4817
Australia
(07) 4773 9444
pst@proscitech.com
proscitech.com.au
Emergency Contact Details
ProSciTech Pty Ltd
11 Carlton Street
KIRWAN QLD 4817
Australia
(07) 4773 9444
pst@proscitech.com
proscitech.com.au
11 Carlton Street
KIRWAN QLD 4817
Australia
(07) 4773 9444
pst@proscitech.com
proscitech.com.au
2. Hazards Identification
Classification of the substance or mixture
Mixture
Label Elements


- Signal Words
- None
- Hazard Statement(s)
- H225: Highly flammable liquid and vapour
- H319: Causes serious eye irritation
- H336: May cause drowsiness or dizzeness
- Precautionary Statement(s)
- Keep away from heat/sparks/open flames/hot surfaces. - No smoking
- Ground/bond container and receiving equipment
- Use explosion-proof electrical/ventilating/lighting/equipment.
- Use only non-sparking tools.
- Take precautionary measures against static discharge.
- Avoid breathing dust/fume/gas/mist/vapours/spray
- Wash thoroughly after handling.
- Use only outdoors or in a well-ventilated area.
- Wear protective gloves/protective clothing/eye protection/face protection.
- If on skin (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower.
- IF INHALED: Remove person to fresh air and keep comfortable for breathing.
- If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do.
- Continue rinsing.
- Call a poison center/doctor if you feel unwell.
- If eye irritation persists: Get medical advice/attention.
- In case of fire: Use for extinction: CO₂, powder or water spray.
- Store in a well-ventilated place. Keep container tightly closed.
- Store in a well-ventilated place. Keep cool.
- Store locked up.
- Dispose of contents/container in accordance with local/regional/national/international regulations.
Primary route(s) of entry
- Inhalation and skin contact - Symptoms of poisoning may even occur after several hours; therefore medical observation for at least 48 hours
- after the accident.
Human Health
- Inhalation
- Supply fresh air. If required, provide artificial respiration. Keep patient warm. Consult doctor if symptoms persist.
- In case of unconsciousness place patient stably in side position for transportation.
- Ingestion
- If symptoms persist consult doctor.
- Eyes
- Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor.
- Skin
- Immediately wash with water and soap and rinse thoroughly.
Environment
No further relevant information available
3. Composition / Information on Ingredients
| Name | CAS No. | Content (w/w) | Classification |
|---|---|---|---|
| n-butyl acetate | 123-86-4 | >25-≤50% | Not Available |
| 2-methoxy-1-methylethyl acetate | 108-65-6 | >25-≤50% | Not Available |
| Acetone, Reagent Grade | 67-64-1 | >10-≤25% | Not Available |
| xylene | 1330-20-7 | >2.5-≤10% | Not Available |
4. First Aid Measures
- Ingestion
- If symptoms persist consult doctor.
- Inhalation
- Supply fresh air. If required, provide artificial respiration. Keep patient warm. Consult doctor if symptoms persist.
- In case of unconsciousness place patient stably in side position for transportation.
- Skin Contact
- Immediately wash with water and soap and rinse thoroughly.
- Eye Contact
- Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor.
- Other Information
- Symptoms of poisoning may even occur after several hours; therefore medical observation for at least 48 hours
- after the accident
5. Firefighting Measures
Suitable extinguishing equipment
- Fire
- CO₂, extinguishing powder or water spray. Fight larger fires with water spray or alcohol resistant foam
- HAZCHEM
- No further relevant information available.
Special protective equipment and precautions for fire fighters
Mouth respiratory protective device.
6. Accidental Release Measures
- Personal precautions, protective equipment and emergency procedures
- Wear protective equipment. Keep unprotected persons away.
- See Section 7 for information on safe handling.
- See Section 8 for information on personal protection equipment.
- See Section 13 for disposal information.
- Environmental precautions
- Dilute with plenty of water.
- Do not allow to enter sewers/ surface or ground water
- Methods and materials for containment and clean up
- Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).
- Dispose contaminated material as waste according to item 13.
- Ensure adequate ventilation.
7. Handling and Storage
- Precautions for safe handling
- Ensure good ventilation/exhaustion at the workplace.
- Prevent formation of aerosols.
- Conditions for safe storage
- Store in a cool location.
- Keep receptacle tightly sealed.
- Store in cool, dry conditions in well sealed receptacles.
- Protect from heat and direct sunlight.
8. Exposure Controls / Personal Protection
Exposure Standards
| Material | TWA ppm | TWA mg/m³ | STEL ppm | STEL mg/m³ |
|---|---|---|---|---|
| n-butyl acetate | 150 ppm | 712 mg/m³ | 200 ppm | 950 mg/m³ |
| 2-methoxy-1-methylethyl acetate | 50 ppm | - | - | |
| Acetone, Reagent Grade | 500 ppm | 1187 mg/m³ | 250 ppm | 590 mg/m³ |
| xylene | 150 ppm | 651 mg/m³ | 100 ppm | 435 mg/m³ |
- Engineering controls
- Keep away from foodstuffs, beverages and feed.
- Immediately remove all soiled and contaminated clothing.
- Wash hands before breaks and at the end of work.
- Avoid contact with the eyes and skin.
Personal protective equipment
- Eye and face protection
- Tightly sealed goggles
- Skin protection
- Protective gloves - The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.
- Body protection
- Protective gloves - The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.
- Respiratory protection
- In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer exposure use
- respiratory protective device that is independent of circulating air.
9. Physical and Chemical Properties
General information
- Appearance
- Clear liquid
- Odour
- Pungent
- pH
- Not determined.
- Vapour Pressure
- Not determined.
- Density
- Not determined.
- Boiling Point
- 55 °C (131 °F)
- Melting Point
- Undetermined
- Solubility
- Fully miscible.
- Specific Gravity of Density
- 0.88568 g/cm³ (7.391 lbs/gal)
- Flash Point
- -19 °C (-2.2 °F)
- Flammable (Explosive) Limits
- Not flammable, Product is not selfigniting
- Product is not explosive. However, formation of explosive air/vapour mixtures are possible.
- Ignition Temperature
- 315 °C (599 °F)
- Formula
- Organic solvents: 100.0 %
- VOC content: 80.77 %
- 912.0 g/l / 7.61 lb/gal
- Solids content: 0.0 %
- Other information No further relevant information available.
10. Stability and Reactivity
- Reactivity
- No further relevant information available.
- Possibility of hazardous reactions
- No dangerous reactions known.
- Conditions to avoid
- No further relevant information available.
- Incompatible materials
- No further relevant information available.
11. Toxicological Information
- Acute effects
- Harmful; Irritant
- Eye contact
- Irritating effect.
- Skin contact
- Irritant to skin and mucous membranes
- Ingestion
- No further relevant information available.
- Inhalation
- No further relevant information available.
- Toxicity and irritation
- IARC (International Agency for Research on Cancer)
- 1330-20-7 xylene 3
12. Ecological Information
- Ecotoxicity
- No further relevant information available
- Persistence and degradability
- No further relevant information available
- Bioaccumulative potential
- No further relevant information available
- Other adverse effects
- Water hazard class 1 (Self-assessment): slightly hazardous for water
- Do not allow undiluted product or large quantities of it to reach ground water, water course or sewage system
13. Disposal Considerations
General information
- Must not be disposed of together with household garbage. Do not allow product to reach sewage system.
- Disposal must be made according to official regulations.
- Water, if necessary with cleansing agents.
14. Transport Information
ADG label required

- HAZCHEM
- No further relevant information available.
- UN Number
- UN1993
- Proper shipping name
- FLAMMABLE LIQUID, N.O.S. (ACETONE, BUTYL ACETATES)
- Transport hazard class
- 3 Flammable liquids
- Packing group
- II
- Environmental hazard
- Not applicable.
- Special precautions for users
- Warning: Flammable liquids
- Hazard identification number (Kemler code): 33
- EMS Number: F-E,S-E
- Stowage Category B
- Additional information
- Quantity limitations On passenger aircraft/rail: 5 L
- On cargo aircraft only: 60 L
- Excepted quantities (EQ) Code: E2
- Maximum net quantity per inner packaging: 30 mL
- Maximum net quantity per outer packaging: 500 mL
- Limited quantities (LQ) 1L
- Excepted quantities (EQ) Code: E2
- Maximum net quantity per inner packaging: 30 mL
- Maximum net quantity per outer packaging: 500 mL
- UN "Model Regulation": UN 1993 FLAMMABLE LIQUID, N.O.S. (ACETONE, BUTYL ACETATES), 3, II
15. Regulatory Information
- Other Information
- Section 355 (extremely hazardous substances): None of the ingredients is listed.
- Section 313 (Specific toxic chemical listings): 1330-20-7 xylene
- TSCA (Toxic Substances Control Act): All components have the value ACTIVE.
- Hazardous Air Pollutants: 1330-20-7 xylene
- Proposition 65
- Chemicals known to cause cancer: None of the ingredients is listed.
- Chemicals known to cause reproductive toxicity for females: None of the ingredients is listed.
- Chemicals known to cause reproductive toxicity for males: None of the ingredients is listed.
- Chemicals known to cause developmental toxicity: None of the ingredients is listed.
- EPA (Environmental Protection Agency)
- 67-64-1 Acetone, Reagent Grade I
- 1330-20-7 xylene I
- TLV (Threshold Limit Value established by ACGIH) 67-64-1 Acetone, Reagent Grade A4
- 1330-20-7 xylene A4
16. Other Information
- SDS preparation date
- 29 March 2022
- Comments
- This information is based on our present knowledge. However, this shall not constitute a guarantee for any specific product features and shall not establish a legally valid contractual relationship.This Safety Data Sheet (SDS) has been prepared in compliance with the Preparation of Safety Data Sheets for Hazardous Chemicals Code of Practice February 2016. It is the user's responsibility to determine the suitability of this information for adoption of necessary safety precautions. The information published in this SDS has been compiled from the publications listed in Section 16: to the best of our ability and knowledge these publications are considered accurate. We reserve the right to revise Safety Data Sheets as new information becomes available. Copies may be made for non-profit use.
