Safety Data Sheets / CCC Carbon Adhesive

Safety Data Sheet

CCC Carbon Adhesive

Version 1Last reviewed 19 February 2026Catalogue: 12664, EMS12664

1. Identification

Product Identifiers

Product Name: CCC Carbon Adhesive
Other Names: N/A
Product Number(s): 12664, EMS12664
CAS Number: -

Recommended use of the chemical and restriction on use

Laboratory use. Laboratory chemicals.

Company Details

ProSciTech Pty Ltd
11 Carlton Street
KIRWAN QLD 4817
Australia
(07) 4773 9444
pst@proscitech.com
proscitech.com.au

Emergency Contact Details

ProSciTech Pty Ltd
11 Carlton Street
KIRWAN QLD 4817
Australia
(07) 4773 9444
pst@proscitech.com
proscitech.com.au

2. Hazards Identification

Classification of the substance or mixture

GHS02 flame
Flam. Liq. 2 H225 Highly flammable liquid and vapour.GHS08 health hazard
Repr. 2 H361d Suspected of damaging the unborn child.
STOT RE 2 H373 May cause damage to organs through prolonged or repeated exposure.
Asp. Tox. 1 H304 May be fatal if swallowed and enters airways.GHS07
Acute Tox. 4 H302 Harmful if swallowed.
Skin Irrit. 2 H315 Causes skin irritation.
Eye Irrit. 2 H319 Causes serious eye irritation.
STOT SE 3 H336 May cause drowsiness or dizziness

Label Elements

Signal Words: None
Hazard Statement(s): H225 Highly flammable liquid and vapour.
H302 Harmful if swallowed.
H315 Causes skin irritation.
H319 Causes serious eye irritation.
H361d Suspected of damaging the unborn child.
H336 May cause drowsiness or dizziness.
H373 May cause damage to organs through prolonged or repeated exposure.
H304 May be fatal if swallowed and enters airways.
Precautionary Statement(s): P301±P310 IF SWALLOWED: Immediately call a POISON CENTER/ doctor.
P303±P361±P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water/ shower.
P305±P351±P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P321 Specific treatment (see on this label).
P405 Store locked up.
P501 Dispose of contents/container in accordance with local/regional/national/international regulations.

Primary route(s) of entry

Not available.

Human Health

Inhalation: Not available.
Ingestion: Not available.
Eyes: Not available.
Skin: Not available.

Environment

Not available.

3. Composition / Information on Ingredients

Name	CAS No.	Content (w/w)	Classification
Toluene	108-88-3	>10-≤25%	Flam. Liq. 2, H225; Repr. 2, H361d; STOT RE 2, H373; Asp. Tox. 1, H304; Skin Irrit. 2, H315; STOT SE 3, H336
Graphite	7782-42-5	>10-≤25%	-Acute Tox. 4, H302; Acute Tox. 4, H312; Acute Tox. 4, H332; Skin Irrit. 2, H315
Acetone, Reagent Grade	67-64-1	>2.5-≤10%	Flam. Liq. 2, H225; Acute Tox. 4, H302; Acute Tox. 4, H312; Acute Tox. 4, H332; Eye Irrit. 2, H319; STOT SE 3, H336
Isobutyl acetate	110-19-0	>2.5-≤10%	Flam. Liq. 2, H225
Heptan-2-one	110-43-0	>2.5-≤10%	Flam. Liq. 3, H226; Acute Tox. 4, H302; Acute Tox. 4, H332
Ethyl Alcohol, denatured	64-17-5	>2.5-≤10%	Flam. Liq. 2, H225
Ethyl acetate	141-78-6	>2.5-≤10%	Flam. Liq. 2, H225; Eye Irrit. 2, H319; STOT SE 3, H336
2-methoxy-1-methylethyl acetate	108-65-6	>2.5-≤10%	Flam. Liq. 3, H226

4. First Aid Measures

Ingestion: If symptoms persist consult doctor
Inhalation: Supply fresh air. If required, provide artificial respiration. Keep patient warm. Consult doctor if symptoms persist.
In case of unconsciousness place patient stably in side position for transportation.
Skin Contact: Immediately wash with water and soap and rinse thoroughly.
Eye Contact: Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor.
Other Information: Symptoms of poisoning may even occur after several hours; therefore medical observation for at least 48 hours
after the accident.

5. Firefighting Measures

Suitable extinguishing equipment

Fire: CO₂, sand, extinguishing powder. Do not use water.
HAZCHEM: Not available.

Special protective equipment and precautions for fire fighters

For safety reasons unsuitable extinguishing agents: Water with full jet.
Protective equipment: Mouth respiratory protective device.

6. Accidental Release Measures

Personal precautions, protective equipment and emergency procedures: Wear protective equipment. Keep unprotected persons away.
Environmental precautions: Do not allow to enter sewers/ surface or ground water.
Methods and materials for containment and clean up: Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).
Dispose contaminated material as waste according to item 13.
Ensure adequate ventilation.
Do not flush with water or aqueous cleansing agents.

7. Handling and Storage

Precautions for safe handling: Ensure good ventilation/exhaustion at the workplace.
Open and handle receptacle with care.
Prevent formation of aerosols.
Conditions for safe storage: Keep ignition sources away - Do not smoke.
Protect from heat.
Protect against electrostatic charges.
Keep respiratory protective device available.
Requirements to be met by storerooms and receptacles: Store in a cool location.
Further information about storage conditions:
Keep container tightly sealed.
Store in cool, dry conditions in well sealed receptacles.
Protect from heat and direct sunlight.

8. Exposure Controls / Personal Protection

Exposure Standards

Material	TWA ppm	TWA mg/m³	STEL ppm	STEL mg/m³
108-88-3 Toluene	50 ppm	191 mg/m³	100 ppm	384 mg/m³
67-64-1 Acetone, Reagent Grade	500 ppm	1210 mg/m³	1500 ppm	3620 mg/m³
110-19-0 Isobutyl acetate	150 ppm	724 mg/m³	187 ppm	903 mg/m³
110-43-0 Heptan-2-one	50 ppm	237 mg/m³	100 ppm	475 mg/m³
64-17-5 Ethyl Alcohol, denatured	1000 ppm	1920 mg/m³	-	-
141-78-6 Ethyl acetate	200 ppm	-	400 ppm	-
108-65-6 2-methoxy-1-methylethyl acetate	50 ppm Sk	274 mg/m³	100 ppm	548 mg/m³

Engineering controls: Keep away from foodstuffs, beverages and feed.
Immediately remove all soiled and contaminated clothing
Wash hands before breaks and at the end of work.
Store protective clothing separately.
Avoid contact with the eyes and skin.

Personal protective equipment

Eye and face protection: Tightly sealed goggles
Skin protection: Protective gloves
The glove material has to be impermeable and resistant to the product/ the substance/ the preparation.
Due to missing tests no recommendation to the glove material can be given for the product/ the preparation/ the
chemical mixture.
Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation
Body protection: Not available.
Respiratory protection: In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer exposure use
self-contained respiratory protective device.

9. Physical and Chemical Properties

General information

Appearance: Fluid, colour according to product specification
Odour: Solvent-like
pH: Not determined.
Vapour Pressure: 233 hPa at 20°C
Density: Not available.
Boiling Point: 55 °C
Melting Point: Undetermined.
Solubility: Not miscible or difficult to mix with water
Specific Gravity of Density: Not available.
Flash Point: -19 °C
Flammable (Explosive) Limits: Not applicable. Product is not self-igniting. Product is not explosive. However, formation of explosive air/vapour mixtures are possible.
Ignition Temperature: 315 °C
Formula: Not available.

10. Stability and Reactivity

Reactivity: Not available.
Chemical stability: No further relevant information available.
Possibility of hazardous reactions: No dangerous reactions known.
Conditions to avoid: No decomposition if used according to specifications.
Incompatible materials: No dangerous decomposition products known.

11. Toxicological Information

Acute effects: Harmful if swallowed.
108-88-3 toluene
Oral LD50 5,000 mg/kg (rat)
Dermal LD50 12,124 mg/kg (rabbit)
Inhalative LC50/4 h 5,320 mg/l (mouse)
Eye contact: Causes serious eye irritation.
Skin contact: Causes skin irritation.
Ingestion: No further relevant information available.
Inhalation: Based on available data, the classification criteria are not met.
Toxicity and irritation: Reproductive toxicity
Suspected of damaging the unborn child.
STOT-single exposure
May cause drowsiness or dizziness.
STOT-repeated exposure
May cause damage to organs through prolonged or repeated exposure.
Aspiration hazard
May be fatal if swallowed and enters airways.

12. Ecological Information

Ecotoxicity: No further relevant information available.
Persistence and degradability: No further relevant information available.
Bioaccumulative potential: No further relevant information available.
Other adverse effects: Water hazard class 2 (German Regulation) (Self-assessment): hazardous for water
Do not allow product to reach ground water, water course or sewage system.
Danger to drinking water if even small quantities leak into the ground.

13. Disposal Considerations

General information

Must not be disposed together with household garbage. Do not allow product to reach sewage system.
Recommendation: Disposal must be made according to official regulations.

14. Transport Information

ADG label required

HAZCHEM: Not available.
UN Number: UN1263
Proper shipping name: 1263 PAINT
Transport hazard class: 3 Flammable liquids
Packing group: PGII
Environmental hazard: Not applicable.
Special precautions for users: Warning: Flammable liquids.
Additional information: Danger code (Kemler): 33
EMS Number: F-E,S-E
Stowage Category B

15. Regulatory Information

Poisons Schedule Number: Not listed.
Other Information: No further relevant information available.

16. Other Information

SDS preparation date: 19 February 2026
Comments: This information is based on our present knowledge. However, this shall not constitute a guarantee for any specific product features and shall not establish a legally valid contractual relationship.