Safety Data Sheets / Cargille Acrylic Matching Liquid, PMMA
Safety Data Sheet
Cargille Acrylic Matching Liquid, PMMA
1. Identification
Product Identifiers
- Product Name
- Cargille Acrylic Matching Liquid, PMMA
- Other Names
- Cargille Immersion Liquid Code 5032
- Product Number(s)
- 19576, EMS19576, IC19576
- CAS Number
- Not available
Recommended use of the chemical and restriction on use
For Professional and R&D use only. Intended for use in a trained and supervised laboratory/industrial setting using standard Good laboratory/Good Manufacturing procedures.
Company Details
ProSciTech Pty Ltd
11 Carlton Street
KIRWAN QLD 4817
Australia
(07) 4773 9444
pst@proscitech.com
proscitech.com.au
11 Carlton Street
KIRWAN QLD 4817
Australia
(07) 4773 9444
pst@proscitech.com
proscitech.com.au
Emergency Contact Details
ProSciTech Pty Ltd
11 Carlton Street
KIRWAN QLD 4817
Australia
(07) 4773 9444
pst@proscitech.com
proscitech.com.au
11 Carlton Street
KIRWAN QLD 4817
Australia
(07) 4773 9444
pst@proscitech.com
proscitech.com.au
2. Hazards Identification
Classification of the substance or mixture
- GHS07
- Skin Irrit. 2 H315 Causes skin irritation.
Label Elements

- Signal Words
- Warning
- Hazard Statement(s)
- H315 Causes skin irritation.
- Precautionary Statement(s)
- P264 Wash thoroughly after handling.
- P280 Wear protective gloves and eye protection.
- P302±P352 IF ON SKIN: Wash with plenty of water.
- P332±P313 If skin irritation occurs: Get medical advice/attention.
- P362±P364 Take off contaminated clothing and wash it before reuse.
Primary route(s) of entry
Not available.
Human Health
- Inhalation
- No further relevant information available.
- Ingestion
- No further relevant information available.
- Eyes
- No further relevant information available.
- Skin
- No further relevant information available.
Environment
No further relevant information available.
3. Composition / Information on Ingredients
| Name | CAS No. | Content (w/w) | Classification |
|---|---|---|---|
| Trade Secret | Not Available | 40-60% | Asp. Tox. 1, H304 |
| Trade Secret | Not Available | 40-60% | Asp. Tox. 1, H304Skin Irrit. 2, H315Flam. Liq. 4, H227 |
4. First Aid Measures
- Ingestion
- Rinse our mouth and then drink plenty of water.
- Do not induce vomiting; immediately call for medical help.
- Inhalation
- Supply fresh air; consult doctor in case of complaints.
- Skin Contact
- Immediately wash with water and soap and rinse thoroughly.
- If skin irritation continues, consult a doctor.
- Eye Contact
- Remove contact lenses if worn.
- Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor.
- Other Information
- Gastric or intestinal orders when ingested.
- Irritant to skin and mucous membranes.
- If medical advice is needed, have product container or label at hand.
5. Firefighting Measures
Suitable extinguishing equipment
- Fire
- Foam.
- Fire-extinguishing powder.
- Gaseous extinguishing agents.
- Carbon dioxide.
- Water fog/haze.
- For safety reasons unsuitable extinguishing agents:
- Water stream.
- Water spray.
- HAZCHEM
- During heating or in case of fire poisonous gases are produced.
Special protective equipment and precautions for fire fighters
Wear self-contained respiratory protective device. Wear fully protective suit.
6. Accidental Release Measures
- Personal precautions, protective equipment and emergency procedures
- Wear protective equipment. Keep unprotected persons away.
- Ensure adequate ventilation.
- Environmental precautions
- Do not allow to enter sewers/surface or ground water.
- Inform respective authorities in case of seepage into water course or sewage system.
- Methods and materials for containment and clean up
- Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).
- Send for recovery or disposal in suitable receptacles.
7. Handling and Storage
- Precautions for safe handling
- Avoid splashes or spray in enclosed areas.
- Avoid contact with the eyes and skin.
- Conditions for safe storage
- Avoid storage near extreme heat, ignition sources or open flame. Store in a well-ventilated place. Keep cool.
- Store away from foodstuffs.
- Store away from oxidisers, strong acids, strong bases.
- Keep containers tightly sealed.
8. Exposure Controls / Personal Protection
Exposure Standards
| Material | TWA ppm | TWA mg/m³ | STEL ppm | STEL mg/m³ |
|---|---|---|---|---|
| Trade Secret | 5mg/m³ | 10mg/m³ |
- Engineering controls
- The usual precautionary measures for handling chemicals should be followed.
- Keep away from foodstuffs, beverages and feed.
- Immediately remove all soiled and contaminated clothing.
- Wash hands before breaks and at the end of work.
- Do not inhale gases/fumes/aerosols.
- Avoid contact with the eyes and skin.
Personal protective equipment
- Eye and face protection
- Safety glasses. Follow relevant national guidelines concerning the use of protective eyewear.
- Skin protection
- Protective gloves. The glove material has to be impermeable and resistant to the product/the substance/the preparation.
- Body protection
- Protective work clothing.
- Respiratory protection
- No further relevant information available.
9. Physical and Chemical Properties
General information
- Appearance
- Oily
- Liquid
- Colourless
- Light yellow
- Odour
- Slight
- Characteristic
- pH
- Not applicable.
- Vapour Pressure
- 0.66hPa
- Density
- 0.89 (water = 1)
- Boiling Point
- >174°C
- Melting Point
- Not determined.
- Solubility
- Not miscible or difficult to mix.
- Specific Gravity of Density
- Not available
- Flash Point
- >174°C
- Flammable (Explosive) Limits
- Not determined
- Ignition Temperature
- Not determined
- Formula
- Not available
10. Stability and Reactivity
- Reactivity
- No relevant information available.
- Chemical stability
- Stable under normal temperatures and pressures.
- No decomposition if used and stored according to specifications.
- Possibility of hazardous reactions
- Can form explosive mixtures in air if heated above flash point and or when sprayed or atomized.
- Toxic fumes may be released if heated above the decomposition point.
- Reacts with strong oxidising agents.
- Reacts with strong acids and alkali.
- Reacts with certain metals.
- Conditions to avoid
- Excessive heat.
- Incompatible materials
- Oxidizers, strong bases, strong acids.
11. Toxicological Information
- Acute effects
- Trade Secret
- Oral LD50 >34600 mg/kg (rat)
- Dermal LD50 >10250 mg/kg (rabbit)
- Inhalative LC50/4h >17300 mg/l (rat)
- Eye contact
- Based on available data, the classification criteria are not met.
- Skin contact
- Based on available data, the classification criteria are not met.
- Ingestion
- Based on available data, the classification criteria are not met.
- Inhalation
- Based on available data, the classification criteria are not met.
- Toxicity and irritation
- Possible route(s) of exposure:
- Ingestion.
- Inhalation.
- Eye contact.
- Skin Contact.
- Irritating to skin.
12. Ecological Information
- Ecotoxicity
- No relevant information.
- Persistence and degradability
- Moderately/partly biodegradable.
- Bioaccumulative potential
- No relevant information available.
- Other adverse effects
- Do not allow undiluted product or large quantities of it to reach ground water, water course or sewage system.
13. Disposal Considerations
General information
- The user of this material has the responsibility to dispose of unused material, residues and containers in compliance with all relevant local, state and federal laws and regulations regarding treatment, storage and disposal for hazardous and non-hazardous wastes.
- Disposal must be made according to official regulations.
14. Transport Information
ADG label required
- HAZCHEM
- During heating or in case of fire poisonous gases are produced.
- UN Number
- Not regulated
- Proper shipping name
- Not regulated
- Transport hazard class
- Not regulated
- Packing group
- Not regulated
- Environmental hazard
- No
- Special precautions for users
- Not applicable
- Additional information
- Not applicable
15. Regulatory Information
- Poisons Schedule Number
- None of the ingredients is listed.
- Other Information
- A Chemical Safety Assessment has not been carried out.
16. Other Information
- SDS preparation date
- 17 February 2026
- Comments
- This information is based on our current knowledge and is intended to describe the product for the purposes of health, safety and environmental requirements only. It should not therefore be construed as guaranteeing any specific property of the product. The information supplied is based on data available to us and is believed to be correct. However, no guarantee or warranty of any kind, expressed or implied, is made with respect to the information presented and we assume no responsibility for the result of the use of this product. This information is furnished upon the condition that the persons responsible for its use shall make their own determination of the suitability of the material for their particular purpose.
