Safety Data Sheets / Benzyldimethylamine (BDMA)
Safety Data Sheet
Benzyldimethylamine (BDMA)
1. Identification
Product Identifiers
- Product Name
- Benzyldimethylamine (BDMA)
- Other Names
- BDMA
- Product Number(s)
- C054
- CAS Number
- 103-83-3
Recommended use of the chemical and restriction on use
Laboratory use.
Company Details
ProSciTech Pty Ltd
11 Carlton Street
KIRWAN QLD 4817
Australia
(07) 4773 9444
pst@proscitech.com
proscitech.com.au
11 Carlton Street
KIRWAN QLD 4817
Australia
(07) 4773 9444
pst@proscitech.com
proscitech.com.au
Emergency Contact Details
ProSciTech Pty Ltd
11 Carlton Street
KIRWAN QLD 4817
Australia
(07) 4773 9444
pst@proscitech.com
proscitech.com.au
11 Carlton Street
KIRWAN QLD 4817
Australia
(07) 4773 9444
pst@proscitech.com
proscitech.com.au
2. Hazards Identification
Label Elements




- Signal Words
- None
- Hazard Statement(s)
- H226 Flammable liquid and vapour.
- H331 Toxic if inhaled.
- H302±H312±H332 Harmful if swallowed, in contact with skin or if inhaled.
- H314 Causes severe skin burns and eye damage.
- H412 Harmful to aquatic life with long lasting effects.
- Precautionary Statement(s)
- P210 Keep away from heat/sparks/open flames/hot surfaces. - No smoking.
- P303±P361±P353 IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin With water/shower.
- P305±P351±P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
- P310 Immediately call a POISON CENTRE/doctor.
- P405 Store locked up.
- P501 Dispose of contents/container in accordance with local/regional/national/international regulations.
Primary route(s) of entry
Not available.
Human Health
- Inhalation
- Not available.
- Ingestion
- Not available.
- Eyes
- Not available.
- Skin
- Not available.
Environment
No further relevant information available.
3. Composition / Information on Ingredients
| Name | CAS No. | Content (w/w) | Classification |
|---|---|---|---|
| benzyldimethylamine | 103-83-3 | - | - |
4. First Aid Measures
- Ingestion
- Call for a doctor immediately.
- Drink plenty of water and provide fresh air. Call for a doctor immediately.
- Inhalation
- Supply fresh air or oxygen. If required, provide artificial respiration. Keep patient warm. Consult doctor if symptoms persist.
- In case of unconsciousness place patient stably in side position for transportation.
- Skin Contact
- Immediately wash with water and soap and rinse thoroughly.
- Eye Contact
- Rinse opened eye for several minutes under running water. Then consult a doctor.
- Other Information
- Immediately remove any clothing soiled by the product.
- Symptoms of poisoning may even occur after several hours; therefore medical observation for at least 48 hours after the accident.
- Remove breathing equipment only after contaminated clothing have been completely removed.
- In case of irregular breathing or respiratory arrest provide artificial respiration.
5. Firefighting Measures
Suitable extinguishing equipment
- Fire
- CO₂, sand, extinguishing powder. Do not use water.
- Large Fire
- CO₂, sand, extinguishing powder. Do not use water.
- HAZCHEM
- Not available.
Special protective equipment and precautions for fire fighters
Mouth respiratory protective device.
6. Accidental Release Measures
- Personal precautions, protective equipment and emergency procedures
- Wear protective equipment. Keep unprotected persons away.
- Environmental precautions
- Inform respective authorities in case of seepage into water course or sewage system.
- Do not allow to enter sewers/ surface or ground water.
- Methods and materials for containment and clean up
- Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).
- Use neutralising agent.
- Dispose contaminated material as waste according to item 13.
- Ensure adequate ventilation.
- Do not flush with water or aqueous cleansing agents
7. Handling and Storage
- Precautions for safe handling
- Ensure good ventilation/exhaustion at the workplace.
- Prevent formation of aerosols. Keep ignition sources away - Do not smoke.
- Protect from heat.
- Protect against electrostatic charges.
- Keep respiratory protective device available.
- Conditions for safe storage
- Keep container tightly sealed.
- Protect from heat and direct sunlight.
8. Exposure Controls / Personal Protection
Exposure Standards
- Engineering controls
- No information available.
Personal protective equipment
- Eye and face protection
- Keep away from foodstuffs, beverages and feed.
- Avoid contact with the eyes and skin.
- Wear tightly sealed goggles
- Skin protection
- Wash hands before breaks and at the end of work.
- Avoid contact with the eyes and skin.
- Wear protective gloves
- Body protection
- Immediately remove all soiled and contaminated clothing.
- Respiratory protection
- In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer exposure use
- self-contained respiratory protective device.
9. Physical and Chemical Properties
General information
- Appearance
- Light yellow liquid
- Odour
- Amine-like
- pH
- Not determined.
- Vapour Pressure
- 2.8 hPa at 20 °C
- Density
- Not available.
- Boiling Point
- 176 °C
- Melting Point
- -75 °C
- Solubility
- Not miscible or difficult to mix.
- Specific Gravity of Density
- 0.915 g/cm³ at 20 °C
- Flash Point
- 54 °C
- Flammable (Explosive) Limits
- Product is not explosive. However, formation of explosive air/vapour
- mixtures are possible.
- Ignition Temperature
- Not determined.
- Formula
- Not available.
10. Stability and Reactivity
- Reactivity
- No further relevant information available.
- Chemical stability
- No further relevant information available.
- Possibility of hazardous reactions
- No dangerous reactions known.
- Conditions to avoid
- No further relevant information available.
- Incompatible materials
- No further relevant information available.
11. Toxicological Information
- Acute effects
- Oral LD50 265 mg/kg (rat)
- Dermal LD50 1660 mg/kg (rabbit)
- Inhalative LC50/4 h 2.06 mg/l (rat)
- Eye contact
- Strong caustic effect.
- Skin contact
- Strong caustic effect on skin and mucous membranes.
- Ingestion
- Swallowing will lead to a strong caustic effect on mouth and throat and to the danger of perforation of esophagus and stomach.
- Inhalation
- No further relevant information available.
- Toxicity and irritation
- No further relevant information available.
12. Ecological Information
- Ecotoxicity
- Harmful to fish
- Persistence and degradability
- No further relevant information available.
- Bioaccumulative potential
- No further relevant information available.
- Other adverse effects
- Water hazard class 2 (German Regulation) (Assessment by list): hazardous for water
- Do not allow product to reach ground water, water course or sewage system.
- Must not reach sewage water or drainage ditch undiluted or unneutralised.
- Danger to drinking water if even small quantities leak into the ground.
- Harmful to aquatic organisms
13. Disposal Considerations
General information
- Must not be disposed together with household garbage. Do not allow product to reach sewage system.
- Disposal must be made according to official regulations
14. Transport Information
ADG label required


- HAZCHEM
- Not available.
- UN Number
- UN2619
- Proper shipping name
- 2619 BENZYLDIMETHYLAMINE
- Transport hazard class
- 8 Corrosive substances
- Packing group
- PG II
- Environmental hazard
- No
- Special precautions for users
- Warning: Corrosive substances.
- Additional information
- Danger code (Kemler): 83
- EMS Number: F-E,S-C
- ADR
- Limited quantities (LQ) 1L
- Excepted quantities (EQ) Code: E2
- Maximum net quantity per inner packaging: 30 mL
- Maximum net quantity per outer packaging: 500 mL
- Transport category 2
- Tunnel restriction code D/E
- IMDG
- Limited quantities (LQ) 1L
- Excepted quantities (EQ) Code: E2
- Maximum net quantity per inner packaging: 30 mL
- Maximum net quantity per outer packaging: 500 ml
15. Regulatory Information
- Poisons Schedule Number
- No information available.
- Other Information
- No further relevant information available.
16. Other Information
- SDS preparation date
- 18 February 2026
- Comments
- This information is based on our present knowledge. However, this shall not constitute a guarantee for any specific product features and shall not establish a legally valid contractual relationship.
- References
- Electron Microscopy Science SDS (BDMA) N-Benzyldimethylamine https://www.emsdiasum.com/docs/technical/msds/11400.pdf Date of issue 17/01/2025
