Azure B-Eosin Y

1. Identification

Product Identifiers

Product Name

Azure B-Eosin Y - DISCONTINUED

Other Names

Azure I haematology stain for ISCH

Product Number(s)

AAZUB-500

CAS Number

-

Recommended use of the chemical and restriction on use

Company Details

Emergency Contact Details

2. Hazards Identification

Classification of the substance or mixture

Label Elements

Signal Words

None

Hazard Statement(s)

Prolonged or repeated skin contact may lead to dermatitis. This product may cause severe eye irritation and depending upon duration of exposure, some form of permanent eye damage may occur. Prolonged or repeated exposure or deliberately concentrating and inhaling the vapour(s) may result in lung function incapacity or death.

Precautionary Statement(s)

Not available.

Primary route(s) of entry

Human Health

Inhalation

Will cause irritation to the nose, throat and respiratory system with effects including: Dizziness, headache, incoordination, chest pains and coughing.

Ingestion

May cause irritation to mouth, throat and stomach with effects including mucous build up, irritation to the tongue and lips and pains in the stomach.

Eyes

Will cause irritation to the eyes, with effects including: tearing, pain, stinging and blurred vision. Depending upon duration of exposure, eye damage may occur.

Skin

May cause irritation to the skin, with effects including; Redness and itchiness.

Environment

3. Composition / Information on Ingredients

4. First Aid Measures

Ingestion

If swallowed, DO NOT induce vomiting. Seek urgent medical assistance.

Inhalation

Remove victim to fresh air. Apply resuscitation if victim is not breathing - DO NOT USE DIRECT MOUTH - TO - MOUTH METHOD if victim ingested or inhaled substance; use alternative respiratory method or proper respiratory device - Administer oxygen if breathing is difficult.

Skin Contact

If material is splashed onto the skin, remove any contaminated clothing and wash skin thoroughly with water and soap if available. Urgently transport to hospital or doctor.

Eye Contact

If material is splashed into eyes, flush with plenty of water for at least 15 minutes, ensuring eyelids are held open. Immediately transport to hospital or doctor.

Other Information

First Aid Facilities: Eye wash fountain, safety shower and normal washroom facilities.

5. Firefighting Measures

Suitable extinguishing equipment

Fire

Use dry chemical, carbon dioxide, foam or water spray.

HAZCHEM

Not available.

Special protective equipment and precautions for fire fighters

6. Accidental Release Measures

Personal precautions, protective equipment and emergency procedures

• Keep unnecessary people away; Isolate hazard area and deny entry. Stay upwind; Keep out of low areas. Isolate for 100 m in all directions if tank, rail car or tanker truck is involved in fire.
• Personal Protective equipment as highlighted in this MSDS. Blanket the spill with foam or use water fog to disperse vapour clouds. Consult an expert regarding disposal of this product.

Environmental precautions

Not available.

Methods and materials for containment and clean up

• SMALL SPILLS:
• Take up with sand, dirt or vermiculite. DO NOT use sawdust. Use non-sparking tools. Place into labelled drum(s) for later disposal.
• LARGE SPILLS:
• Notify Emergency Services (Police or Fire Brigade). Tell them location, nature and any information that would be helpful. Contain spill. Remove all ignition sources and safely stop flow of spill.
• Bund area.
• Trained personnel should wear Personal Protective equipment as highlighted in this MSDS. Blanket the spill with foam or use water fog to disperse vapour clouds. Consult an expert regarding disposal of this product.

7. Handling and Storage

Precautions for safe handling

• Keep locked up and out of reach of children.
• Keep container tightly closed.

Conditions for safe storage

Store in a cool place and out of direct sunlight. Store away from sources of heat or ignition, strong alkalis, acids, combustibles and oxidising agents. All equipment must be earthed. Store in original packages as approved by manufacturer. Check all fittings, valves, reticulation (piping) and any ancillary equipment for leaks. A supplied air respirator or a Self-Contained Breathing Apparatus (SCBA) for emergencies should be available and checked regularly. For further information please refer to the Engineering Controls of this MSDS.

8. Exposure Controls / Personal Protection

Exposure Standards

Engineering controls

Toxic material. Single significant exposure may cause death. Maintain adequate ventilation at all times. Prevent accumulation of gas(es) in hollows or sumps. Eliminate any sources of ignition. DO NOT enter room unless monitored by another person (ie buddy-buddy system). Sampling of the atmosphere if possible should be conducted automatically instead of human operator and any leaks discovered should then be directed digitally to a command centre where the event can be acted upon, with all appropriate procedures being implemented and including any protective equipment as outlined in this MSDS.

Personal protective equipment

Eye and face protection

Chemical goggles or faceshield to protect eyes.

Skin protection

PVC, Nitrile, Neoprene, Natural rubber or any other type of glove as recommended by the manufacturer.

Body protection

Nitrile, Neoprene, Natural rubber or any other type of apron or splash suit as recommended by the manufacturer.

Respiratory protection

Avoid breathing of gases. Select and use respirators in accordance with AS/NZS 1715/1716. When gases exceed the exposure standards then the use of an atmosphere-supplied, positive pressure demand self-contained or airline breathing apparatus supplied air respirator complying with the requirements of AS/NZS 1715 is recommended. Filter capacity and respirator type depends on exposure levels. If entering spaces where the airborne concentration of a contaminant is unknown then the use of a Self-contained breathing apparatus (SCBA) with positive pressure air supply complying with AS/NZS 1715 / 1716, or any other acceptable International Standard is recommended.

9. Physical and Chemical Properties

General information

Appearance

Dark Blue Liquid

Odour

Not available.

pH

Not available.

Vapour Pressure

0.6hPa @20°C

Density

L=1.10kg

Boiling Point

189°C

Melting Point

18°C

Solubility

Miscible in water.

Specific Gravity of Density

Not available.

Flash Point

95°C open cup

Flammable (Explosive) Limits

Not available.

Ignition Temperature

Material does not burn.

Formula

Not available.

10. Stability and Reactivity

Reactivity

No further relevant information available.

Chemical stability

Stable under normal conditions of use.

Possibility of hazardous reactions

Will not occur.

Conditions to avoid

Heat, flames, ignition sources and incompatibles.

Incompatible materials

Strong alkalis, acids, nitrates and oxidising agents.

11. Toxicological Information

Acute effects

In case of accident or if you feel unwell, contact a doctor or Poisons Information Centre immediately and show this container or label.

Eye contact

• In case of contact with eyes, rinse immediately with plenty of water and contact a doctor or Poisons Information Centre.
• Wear suitable gloves and eye/face protection.

Skin contact

Avoid contact with skin.

Ingestion

No further relevant information available.

Inhalation

Irritating to eyes and respiratory system.

Toxicity and irritation

• DIMETHYL SULFOXIDE
• LD50 17.9ml/kg (rat)
• No other Exposure details available.

12. Ecological Information

Ecotoxicity

This substance may cause long term adverse effects in the environment.

Persistence and degradability

No further relevant information available.

Bioaccumulative potential

No further relevant information available.

Other adverse effects

No further relevant information available.

13. Disposal Considerations

General information

14. Transport Information

ADG label required

HAZCHEM

Not available.

UN Number

UN 160

Proper shipping name

DYE, LIQUID, TOXIC, N.O.S. (DimethylSulphoxide / AzureB dye).

Transport hazard class

6.1

Packing group

III

Environmental hazard

No information available.

Special precautions for users

No information available.

Additional information

• Hazchem Code: 2X
• Classified as a CLASS 6 (TOXIC) Dangerous Good according to the Australian Code for the Transport of Dangerous Goods by Road and Rail, 6th Edition. If non toxic solvent is used this product may not list as UN1602.
• Dangerous goods of Class 6 (Toxic) are incompatible in a placard load with any of the following: - Class 1
• Class 3, if the Class 3 dangerous goods are nitromethane
• Class 8, if the Class 6 dangerous goods are cyanides and the Class 8 dangerous goods are acids; and are incompatible with food and food packaging in any quantity.
• Emergency information(Transport):
• Dangerous Goods - Initial Emergency Response Guide (SAA/SNZ HB76:1997)
• For TOXIC SUBSTANCES - Guide No: 34

15. Regulatory Information

Poisons Schedule Number

S6

Other Information

No further relevant information available.

16. Other Information

SDS preparation date

18 February 2026

Comments

This information is based on our present knowledge. However, this shall not constitute a guarantee for any specific product features and shall not establish a legally valid contractual relationship.