Safety Data Sheets / Apiezon® AP201 Vapour Booster Pump Fluid
Safety Data Sheet
Apiezon® AP201 Vapour Booster Pump Fluid
1. Identification
Product Identifiers
- Product Name
- Apiezon® AP201 Vapour Booster Pump Fluid
- Other Names
- Apiezon® AP201 Oil
- Product Number(s)
- AP201, M1-AP201-004, M1-AP201-020, M1-AP201-200
- CAS Number
- Not available
Recommended use of the chemical and restriction on use
Laboratory use. Oil for diffusion-ejector (booster) pumps
Company Details
ProSciTech Pty Ltd
11 Carlton Street
KIRWAN QLD 4817
Australia
(07) 4773 9444
pst@proscitech.com
proscitech.com.au
11 Carlton Street
KIRWAN QLD 4817
Australia
(07) 4773 9444
pst@proscitech.com
proscitech.com.au
Emergency Contact Details
ProSciTech Pty Ltd
11 Carlton Street
KIRWAN QLD 4817
Australia
(07) 4773 9444
pst@proscitech.com
proscitech.com.au
11 Carlton Street
KIRWAN QLD 4817
Australia
(07) 4773 9444
pst@proscitech.com
proscitech.com.au
2. Hazards Identification
Classification of the substance or mixture
This product is not classified as hazardous and this document has been compiled for information purposes.
Label Elements
- Signal Words
- None
- Hazard Statement(s)
- Not classified
- Precautionary Statement(s)
- Not classified
Primary route(s) of entry
- Primary route of entry: Skin contact
- Secondary route: Eye contact
Human Health
- Inhalation
- Unlikely under normal conditions because of the product's very low vapour pressure.
- Ingestion
- Possible if accidentally swallowed; may cause gastrointestinal effects
- Eyes
- May cause transient irritation.
- Skin
- Repeated or prolonged contact may cause skin disorders/irritation.
Environment
- Not classified as an environmental hazard under the current GHS criteria.
- Nevertheless, do not contaminate soil, groundwater, lakes, streams or ponds and do not flush into drains.
- Other Hazards
- can create a significant slip hazard.
3. Composition / Information on Ingredients
| Name | CAS No. | Content (w/w) | Classification |
|---|---|---|---|
| Distillates (petroleum) hydrotreated heavy naphthenic | 64742-52-5 | >95% | Not Available |
| Performance enhancing additives | Proprietary | <5% | Not Available |
4. First Aid Measures
- Ingestion
- Wash mouth out with water
- Do not induce vomiting; call for medical help immediately.
- If vomiting occurs spontaneously, keep head below hips to prevent aspiration.
- Inhalation
- Supply fresh air; consult doctor in case of complaints.
- Skin Contact
- Immediately wash with water and soap and rinse thoroughly. If skin irritation continues, consult a doctor.
- Eye Contact
- Check for and remove any contact lenses.
- Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor.
- Other Information
- No adverse effects expected. No special treatment required.
- Information for doctor: Treat symptomatically and supportively.
5. Firefighting Measures
Suitable extinguishing equipment
- Fire
- Suitable extinguishing agents:
- CO2, powder or water spray. Fight larger fires with water spray or alcohol resistant foam. Use fire
- extinguishing methods suitable to surrounding conditions.
- For safety reasons unsuitable extinguishing agents: Water with full jet
- HAZCHEM
- None
Special protective equipment and precautions for fire fighters
Self-contained breathing apparatus may be required.
6. Accidental Release Measures
- Personal precautions, protective equipment and emergency procedures
- Avoid contact with skin and eyes. Particular danger of slipping on leaked/spilled product. Ensure adequate ventilation.
- Environmental precautions
- Do not allow to penetrate the ground/soil.
- Do not allow to enter sewers/ surface or ground water.
- Inform respective authorities in case of seepage into water course or sewage system.
- Methods and materials for containment and clean up
- Contain and collect spillage with non-combustible, absorbent material e.g.sand, earth, vermiculite or diatomaceous earth and place in container for disposal according to local regulations.
7. Handling and Storage
- Precautions for safe handling
- Avoid eye and prolonged skin contact.
- Do not heat up to temperatures close to flash point.
- Conditions for safe storage
- Requirements to be met by storerooms and receptacles: Prevent any seepage into the ground.
- Information about storage in one common storage facility: Store away from oxidising agents.
- Further information about storage conditions: Store in cool, dry conditions in well sealed receptacles.
- Store in a bunded area.
- Storage class: 10
8. Exposure Controls / Personal Protection
Exposure Standards
| Material | TWA ppm | TWA mg/m³ | STEL ppm | STEL mg/m³ |
|---|---|---|---|---|
| Oil mist, mineral | - | 5mg/m3 | - |
- Engineering controls
- Eye washes should be available for emergency use. The usual precautionary measures are to be adhered to when handling chemicals. Avoid contact with the eyes and skin.
- Do not eat, drink, smoke or sniff while working.
- Do not carry product impregnated cleaning cloths in trouser pockets.
- Environmental exposure controls: Do not allow to enter drains, sewers or watercourses.
Personal protective equipment
- Eye and face protection
- If splashes are likely to occur wear safety glasses.
- Safety glasses with side-shields conforming to EN166.
- Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU).
- Skin protection
- Wash hands after use. For prolonged or repeated skin contact gloves are recommended.
- Use gloves tested and approved under appropriate government standards such as NIOSH (US)
- or EN374 (EU).
- The glove material has to be impermeable and resistant to the product/ the substance/ the preparation.
- Selection of the glove material on consideration of the penetration times, rates of diffusion and the
- degradation
- Material of gloves: Nitrile rubber, NBR Neoprene gloves
- The selection of the suitable gloves does not only depend on the material, but also on further marks of
- quality and varies from manufacturer to manufacturer.
- Penetration time of glove material:
- Break-through time: > 480 minutes
- The exact break through time has to be found out by the manufacturer of the protective gloves and has to
- be observed.
- Body protection
- Body protection must be chosen depending on product properties, activity and possible exposure. Wear coveralls
- Respiratory protection
- Do not inhale gases / fumes / aerosols. Use suitable respiratory protective device in case of insufficient ventilation.
9. Physical and Chemical Properties
General information
- Appearance
- Pale amber liquid
- Odour
- Characteristic oily
- pH
- Not applicable
- Vapour Pressure
- 4 x 10-6 Torr at 20°C
- Density
- at 20°C: 0.899 g/cm³
- Boiling Point
- >250°C.
- Melting Point
- Not abailable
- Solubility
- Insoluble
- Specific Gravity of Density
- Not available
- Flash Point
- 196°C (closed cup).
- Flammable (Explosive) Limits
- Data not available
- Ignition Temperature
- >320°C
- Formula
- Not available
10. Stability and Reactivity
- Reactivity
- Stable under normal conditions of use.
- Chemical stability
- Stable under normal conditions of use.
- Possibility of hazardous reactions
- Data not available.
- Conditions to avoid
- Temperatures >180°C.
- Incompatible materials
- Strong oxidising agents.
11. Toxicological Information
- Acute effects
- Skin and eyes are the most likely routes for exposure. Accidental ingestion may occur. Inhalation is not expected to be a relevant route of exposure.
- Eye contact
- May cause transient irritation
- Skin contact
- Repeated and prolonged skin contact may cause dry skin or irritation.
- Ingestion
- Not available
- Inhalation
- Low volatility makes inhalation unlikely.
- Toxicity and irritation
- Germ cell mutagenicity: Based on available data, the classification criteria are not met.
- Carcinogenicity: Based on available data, the classification criteria are not met.
- Reproductive toxicity: Based on available data, the classification criteria are not met.
- STOT-single exposure: Based on available data, the classification criteria are not met.
- STOT-repeated exposure: Based on available data, the classification criteria are not met.
- Aspiration hazard: Based on available data, the classification criteria are not met.
- Subacute to chronic toxicity: Prolonged or repeated skin contact may irritate and cause dermatitis.
- Additional toxicological information:
- Small amounts of liquid aspirated into the respiratory system during ingestion or from vomiting may cause
- brochopneumonia or pulmonary oedema.
12. Ecological Information
- Ecotoxicity
- When used and or disposed of as indicated no adverse environmental effects are foreseen. Ecotoxicological effects based on knowledge of similar substances.
- Persistence and degradability
- Inherently biodegradable
- Bioaccumulative potential
- Has the potential to bioaccumulate.
- Other adverse effects
- No other adverse effects envisaged.
13. Disposal Considerations
General information
- Recommended Hierarchy of Controls:
- • Minimise waste;
- • Reuse if not contaminated;
- • Recycle, if possible; or
- • Safe disposal (if all else fails).
- Must not be disposed together with household garbage. Do not allow product to reach sewage system.
- Contact waste processors for recycling information.
- Unused product may be returned for reclamation.
- Used, degraded or contaminated product may be classified as hazardous waste. Anyone classifying hazardous waste and determining its fate must be qualified in accordance with state and international legislation.
- Delivery of waste oil to offically authorised collectors only.
- Uncleaned packaging:
- Recommendation:
- Empty contaminated packagings thoroughly. They may be recycled after thorough and proper cleaning.
- Disposal must be made according to official regulations.
- Containers, even those that are “empty,” may contain residues that can develop flammable and/or hazardous vapours upon heating. Do not cut, drill, grind, weld, or perform similar operations on or near empty containers.
- Recommended cleansing agents: Water, if necessary together with cleansing agents.
14. Transport Information
ADG label required
- HAZCHEM
- None
- UN Number
- Not relevant
- Proper shipping name
- Not relevant
- Transport hazard class
- Not relevant
- Packing group
- Not relevant
- Environmental hazard
- Not relevant
- Special precautions for users
- Not relevant
- Additional information
- Not relevant
15. Regulatory Information
- Poisons Schedule Number
- Regulated explosives precursors:
- None of the ingredients are listed.
- Regulated poisons: None of the ingredients are listed.
- Reportable explosives precursors: None of the ingredients are listed.
- Reportable poisons: None of the ingredients are listed.
- Other Information
- Control Of Major Accident Hazards Regulations 2015 (COMAH)
- Named dangerous substances - ANNEX I: None of the ingredients are listed.
- DIRECTIVE 2011/65/EU on the restriction of the use of certain hazardous substances in electrical
- and electronic equipment – Annex II: None of the ingredients are listed.
- REGULATION (EU) 2019/1148
- Annex I - RESTRICTED EXPLOSIVES PRECURSORS (Upper limit value for the purpose of licensing
- under Article 5(3)): None of the ingredients are listed.
- Annex II - REPORTABLE EXPLOSIVES PRECURSORS: None of the ingredients are listed.
- Regulation (EC) No 273/2004 on drug precursors: None of the ingredients are listed.
- Regulation (EC) No 111/2005 laying down rules for the monitoring of trade between the Community
- and third countries in drug precursors: None of the ingredients are listed.
16. Other Information
- SDS preparation date
- 19 August 2026
- Comments
- A chemical safety assessment has been performed for this substance.
- Abbreviations and acronyms
- UK REACH: REGULATION (EC) No 1907/2006 concerning the Registration, Evaluation, Authorisation
- and Restriction of Chemicals
- GB CLP: REGULATION (EC) No 1272/2008 on classification, labelling and packaging of substances and
- mixtures.
- UFI: Unique Formula Identifier
- UK- REACH: The UK REACH etc. (Amendment etc.) (EU Exit) Regulations 2019 concerning the
- Registration, Evaluation, Authorisation and Restriction of Chemicals
- GB- CLP: Retained GB CLP Regulation (EU) No. 1272/2008 as amended for Great Britain on the
- Classification, Labelling and Packaging of Chemicals.
- ADR: Accord relatif au transport international des marchandises dangereuses par route (European
- Agreement Concerning the International Carriage of Dangerous Goods by Road)
- IMDG: International Maritime Code for Dangerous Goods
- IATA: International Air Transport Association
- GHS: Globally Harmonised System of Classification and Labelling of Chemicals
- EINECS: European Inventory of Existing Commercial Chemical Substances
- ELINCS: European List of Notified Chemical Substances
- CAS: Chemical Abstracts Service (division of the American Chemical Society)
- VOC: Volatile Organic Compounds (USA, EU)
- DNEL: Derived No-Effect Level (UK REACH)
- PNEC: Predicted No-Effect Concentration (UK REACH) LC50: Lethal concentration, 50 percent
- LD50: Lethal dose, 50 percent
- PBT: Persistent, Bioaccumulative and Toxic
- vPvB: very Persistent and very Bioaccumulative
- References
- Apiezon "AP201 Oil" SDS Version 17 March 2026 https://apiezon.com/wp-content/uploads/2022/12/Apiezon_AP201_Oil_SDS_UK.pdf
