Safety Data Sheets / Aniline-Alcohol 1% Solution
Safety Data Sheet
Aniline-Alcohol 1% Solution
1. Identification
Product Identifiers
- Product Name
- Aniline-Alcohol 1% Solution
- Other Names
- Not available
- Product Number(s)
- 26450-02, EMS26450-02
- CAS Number
- Not available.
Recommended use of the chemical and restriction on use
Laboratory chemicals. Stains
Company Details
ProSciTech Pty Ltd
11 Carlton Street
KIRWAN QLD 4817
Australia
(07) 4773 9444
pst@proscitech.com
proscitech.com.au
11 Carlton Street
KIRWAN QLD 4817
Australia
(07) 4773 9444
pst@proscitech.com
proscitech.com.au
Emergency Contact Details
ProSciTech Pty Ltd
11 Carlton Street
KIRWAN QLD 4817
Australia
(07) 4773 9444
pst@proscitech.com
proscitech.com.au
11 Carlton Street
KIRWAN QLD 4817
Australia
(07) 4773 9444
pst@proscitech.com
proscitech.com.au
2. Hazards Identification
Classification of the substance or mixture
- GHS02 Flame
- Water-react. 1 H260 In contact with water releases flammable gases which may ignite spontaneously.
- GHS08 Health hazard
- Muta. 2 H341 Suspected of causing genetic defects.
- Carc. 1A H350 May cause cancer.
- STOT SE 2 H371 May cause damage to the central nervous system and the visual organs.
- STOT RE 1 H372 Causes damage to organs through prolonged or repeated exposure.
- GHS07
- Eye Irritation 2A H319 Causes serious eye irritation.
- Skin Sens. 1 H317 May cause an allergic skin reaction.
Label Elements



- Signal Words
- None
- Hazard Statement(s)
- Hazard-determining components of labelling:
- Ethyl alcohol
- aniline
- Methyl Alcohol
- In contact with water releases flammable gases which may ignite spontaneously.
- Causes serious eye irritation.
- May cause an allergic skin reaction.
- Suspected of causing genetic defects.
- May cause cancer.
- May cause damage to the central nervous system and the visual organs.
- Causes damage to organs through prolonged or repeated exposure.
- Precautionary Statement(s)
- Obtain special instructions before use.
- Do not handle until all safety precautions have been read and understood.
- Keep away from any possible contact with water, because of violent reaction and possible flash fire.
- Handle and store contents under inert gas. Protect from moisture.
- Do not breathe dust/fume/gas/mist/vapours/spray.
- Wash thoroughly after handling.
- Do not eat, drink or smoke when using this product.
- Contaminated work clothing should not be allowed out of the workplace.
- Wear protective gloves/protective clothing/eye protection/face protection.
Primary route(s) of entry
Not available
Human Health
- Inhalation
- Not available
- Ingestion
- Not available.
- Eyes
- Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If exposed or concerned: Get medical advice/attention. If eye irritation persists: Get medical advice/attention.
- Skin
- Wash with plenty of water. If skin irritation or rash occurs: Get medical advice/attention. Brush off loose particles from skin. Immerse in cool water/wrap in wet bandages. Wash contaminated clothing before reuse.
Environment
- In case of fire: Use CO₂, sand, extinguishing powder for extinction.
- Store in a dry place. Store in a closed container.
- Store locked up.
- Dispose of contents/container in accordance with local/regional/national/international regulations.
3. Composition / Information on Ingredients
| Name | CAS No. | Content (w/w) | Classification |
|---|---|---|---|
| Ethyl alcohol | 64-17-5 | >50-≤100% | Not Available |
| Methyl Alcohol | 67-56-1 | >2.5-≤10% | Not Available |
| aniline | 62-53-3 | ≤2.5% | Not Available |
4. First Aid Measures
- Ingestion
- If symptoms persist consult doctor.
- Inhalation
- Supply fresh air and to be sure call for a doctor.
- In case of unconsciousness place patient stably in side position for transportation.
- Skin Contact
- Immediately wash with water and soap and rinse thoroughly.
- Eye Contact
- Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor.
- Other Information
- Symptoms of poisoning may even occur after several hours; therefore medical observation for at least 48 hours after the accident.
5. Firefighting Measures
Suitable extinguishing equipment
- Fire
- Use fire extinguishing methods suitable to surrounding conditions.
- HAZCHEM
- For safety reasons unsuitable extinguishing agents: Water
Special protective equipment and precautions for fire fighters
Mouth respiratory protective device.
6. Accidental Release Measures
- Personal precautions, protective equipment and emergency procedures
- Wear protective equipment. Keep unprotected persons away.
- Environmental precautions
- Inform respective authorities in case of seepage into water course or sewage system.
- Dilute with plenty of water.
- Do not allow to enter sewer/surface or ground water.
- Methods and materials for containment and clean up
- Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).
- Dispose contaminated material as waste according to item 13.
- Ensure adequate ventilation.
- Do not flush with water or aqueous cleansing agents.
7. Handling and Storage
- Precautions for safe handling
- Ensure good ventilation/exhaustion at the workplace.
- Prevent formation of aerosols.
- Keep ignition sources away - Do not smoke.
- Conditions for safe storage
- Keep container tightly sealed.
- Store in cool, dry conditions in well sealed receptacles.
8. Exposure Controls / Personal Protection
Exposure Standards
| Material | TWA ppm | TWA mg/m³ | STEL ppm | STEL mg/m³ |
|---|---|---|---|---|
| 64-17-5 Ethyl alcohol | 1000ppm | 1880mg/m³ | ||
| 67-56-1 Methyl Alcohol | 200ppm | 262mg/m³ | 250ppm | 328mg/m³ |
| 62-53-3 aniline | 2ppm | 7.6mg/m³ |
- Engineering controls
- Keep away from foodstuffs, beverages and feed.
- Immediately remove all soiled and contaminated clothing.
- Wash hands before breaks and at the end of work.
- Avoid contact with the eyes.
- Avoid contact with the eyes and skin.
Personal protective equipment
- Eye and face protection
- Tightly sealed goggles.
- Skin protection
- Wear protective gloves. The glove material has to be impermeable and resistant to the product/the substance/the preparation. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation. The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.
- Body protection
- Wear protective clothing.
- Respiratory protection
- In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer exposure use self-contained respiratory protective device.
9. Physical and Chemical Properties
General information
- Appearance
- Clear liquid
- Odour
- Alcohol-like
- pH
- 6.5-9
- Vapour Pressure
- Not determined
- Density
- Not determined
- Boiling Point
- 100°C
- Melting Point
- Not determined
- Solubility
- Fully miscible
- Specific Gravity of Density
- Not determined
- Flash Point
- Not applicable
- Flammable (Explosive) Limits
- Not determined
- Ignition Temperature
- Spontaneously flammable in air
- Formula
- Not available
10. Stability and Reactivity
- Reactivity
- No further relevant information available.
- Chemical stability
- No decomposition if used according to specifications.
- Possibility of hazardous reactions
- Contact with water releases flammable gases.
- Conditions to avoid
- No further relevant information.
- Incompatible materials
- No further relevant information available.
11. Toxicological Information
- Acute effects
- 67-56-1 Methyl Alcohol
- Oral LD50 5628 mg/kg (rat)
- Dermal LD50 15800 mg/kg (rabbit)
- 62-53-3 aniline
- Oral LD50 250 mg/kg (rat)
- Dermal LD50 820 mg/kg (rabbit)
- Inhalative LC50-4h 175 mg/l (mouse)
- Eye contact
- Irritating effect.
- Skin contact
- No irritant effect. Sensitisation possible through skin contact.
- Ingestion
- Not available
- Inhalation
- Not available
- Toxicity and irritation
- Harmful
- Irritant
12. Ecological Information
- Ecotoxicity
- Harmful to fish.
- Persistence and degradability
- No further relevant information available.
- Bioaccumulative potential
- No further relevant information available.
- Other adverse effects
- Water hazard class 1: slightly hazardous for water.
- Do not allow undiluted product or large quantities of it to reach ground water, water course or sewage system.
- Harmful to aquatic organisms.
13. Disposal Considerations
General information
- Must not be disposed together with household garbage. Do not allow product to reach sewage system.
- Disposal must be made according to official regulations.
- Recommended cleansing agents: Water, if necessary together with cleansing agents.
14. Transport Information
ADG label required


- HAZCHEM
- For safety reasons unsuitable extinguishing agents: Water
- UN Number
- UN2929
- Proper shipping name
- 2929 TOXIC LIQUID, FLAMMABLE, ORGANIC, N.O.S.
- Transport hazard class
- Class 6.1 Toxic substances
- Label 6.1/3
- Packing group
- II
- Environmental hazard
- Not applicable.
- Special precautions for users
- Warning: Toxic substances
- Additional information
- Not available.
15. Regulatory Information
- Poisons Schedule Number
- 67-56-1 Methyl Alcohol S5, S6
- 62-53-3 aniline S6
- Other Information
- A Chemical Safety Assessment has not been carried out.
16. Other Information
- SDS preparation date
- 13 January 2025
- Comments
- This information is based on our present knowledge. However, this shall not constitute a guarantee for any specific features and shall not establish a legally valid contractual relationship.
